journal article·2021-11Open access

Mechanical and microstructural characterization of functionally graded Inconel 825 - SS316L fabricated using wire arc additive manufacturing

T.S. Senthil, S. Ramesh Babu, M. Puviyarasan, V. Dhinakaran

Abstract

This work aims to fabricate the functionally graded Inconel 825 - SS316L wall using the Cold Metal Transfer (CMT) based Wire Arc Additive Manufacturing (WAAM) process. The mechanical behavior of the fabricated wall was appraised with the help of room temperature tensile and microhardness tests on the specimens cut from Inconel 825, SS316L, and the interface regions. Fracture morphology revealed the failure of all the specimens after sufficient plastic deformation, indicating ductile fracture. A change in microhardness was observed at the interface region. The optical micrograph revealed a continuous cellular–dendritic and discontinuous cellular–dendritic region in the Inconel 825 region, whereas the SS316L region was comprised of δ ferrite in the primary austenitic (γ) dendrites. The Energy Dispersive Spectroscopy (EDS) line scans of the FGM wall revealed a gradual change in the Ni and Fe content throughout the interface, signifying a successful fabrication of the FGM.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Additive Manufacturing Materials and Processes · Additive Manufacturing and 3D Printing Technologies · High Entropy Alloys Studies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (28)

Show source-provided references
1. 1977 · vol. 40
2. Effect of main parameters on the mechanical and wear behavior of functionally graded materials by centrifugal casting: a review10.1007/s12540-019-00273-8 ↗
3. Influence of long-term thermal aging on the microstructural evolution of nuclear reactor pressure vessel materials: an atom probe study10.1016/S0022-3115(97)00264-X ↗
4. Structural biological materials: critical mechanics-materials connections10.1126/science.1220854 ↗
5. Thermal stresses in functionally graded materials10.1080/014957399280841 ↗
6. Dreshfield · 1992 · 1
7. Biological materials: functional adaptations and bio-inspired designs10.1016/j.pmatsci.2012.03.001 ↗
8. Recent advances in the manufacturing processes of functionally graded materials: a review10.1515/secm-2015-0395 ↗
10. Processing techniques for functionally graded materials10.1016/S0921-5093(03)00578-1 ↗
11. Fabrication of ZrO2-NiCr functionally graded material by powder metallurgy10.1016/S0254-0584(00)00355-2 ↗
12. An investigation on mechanical and microstructural properties of 316LSi parts fabricated by a robotized laser/wire direct metal deposition system
13. Effect of surface preparation on the corrosion of austenitic stainless steel 304L in high temperature steam and simulated PWR primary water10.1016/j.corsci.2011.12.007 ↗
14. Characterization of heat affected zone liquation cracking in laser additive manufacturing of Inconel 71810.1016/j.matdes.2015.10.155 ↗
15. Liquation cracking during the welding of austenitic stainless steels and nickel alloys
16. Fabrication of SS316L-IN625 functionally graded materials by powder-fed directed energy deposition
17. Functionally graded material of 304L Stainless Steel and Inconel 625 fabricated by directed energy deposition: characterization and thermodynamic modeling10.1016/j.actamat.2016.02.019 ↗
18. Parametric study of development of Inconel-steel functionally graded materials by laser direct metal deposition10.1016/j.matdes.2013.08.079 ↗
19. Interfacial characteristic and mechanical performance of maraging steel-copper functional bimetal produced by selective laser melting based hybrid manufacture10.1016/j.matdes.2018.05.064 ↗
20. Laser rapid manufacturing of stainless steel 316L/inconel718 functionally graded materials: microstructure evolution and mechanical properties10.1155/2010/802385 ↗
21. Investigation on the fusion zone microstructures and mechanical integrity of AISI 904L and Inconel 625 weld joints
22. Mechanical and microstructural characterization of TIG welded dissimilar joints between 304L austenitic stainless steel and Incoloy 800HT nickel alloy10.3390/met10050559 ↗
23. Wire + Arc Additive manufacturing10.1179/1743284715Y.0000000073 ↗
24. Microstructure and mechanical properties of the austenitic stainless steel 316L fabricated by gas metal arc additive manufacturing10.1016/j.msea.2017.05.024 ↗
25. Constitution diagram for stainless steel weld metal
26. 2011
27. 2020
28. Ferritic-austenitic solidification mode in austenitic stainless steel welds10.1007/BF02661201 ↗