journal article·2021-11Open access

Elliptic vibration assisted cutting of metal matrix composite reinforced by silicon carbide: an investigation of machining mechanisms and surface integrity

Jiakang Zhou, Mingming Lu, Jieqiong Lin, Yongsheng Du

Abstract

This paper aims to investigate the deformation mechanisms and surface integrity of SiCp/Al composites machined by elliptic vibration assisted cutting (EVAC). Self-designed EVAC device was applied to generate the elliptical trajectory on tool tip, which is driven by three piezoelectric actuators along different directions with phase difference. A two-dimensional (2D) microstructure-based finite element (FE) model of SiCp/Al composites was also established to research the deformation mechanisms and surface integrity in the process of EVAC, including material removal mechanisms, cutting force, surface roughness and microstructure. Systematic orthogonal cutting experiments shown that the relative position of tool-particles are changed by the time-varying cutting thickness in EVAC, leading to more obvious particle fracture during SiC particles removal process. Particle fracture appears in the area of particle clusters affected by chip lifting of tool. The intermittent cutting effect not only reduces the average cutting force, but also eliminates the scratch on machined surface caused by SiC particles entering the flank face–workpiece interface, improving the machined surface quality. Limited by the volume of material removal, 2D FE model has a high prediction accuracy for the micro-removal process of composite materials. The application of elliptical vibration is able to create the special functional surfaces. In order to increase the hydrophobicity of machined surface, larger feed rate and smaller cutting depth should be selected as far as possible.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Advanced machining processes and optimization · Advanced Surface Polishing Techniques · Advanced Machining and Optimization Techniques

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (42)

Show source-provided references
1. Micromanufacturing of composite materials: a review10.1088/2631-7990/ab0f74 ↗
2. Mechanisms in turning of metal matrix composites: a review10.1016/j.jmrt.2014.10.013 ↗
3. Machinability analysis and application of response surface approach on CNC turning of LM6/SiCp composites10.1080/10426914.2019.1660787 ↗
4. State-of-the-art of surface integrity in machining of metal matrix composites10.1016/j.ijmachtools.2019.05.006 ↗
5. High speed, high power density laser-assisted machining of Al-SiC metal matrix composite with significant increase in productivity and surface quality10.1016/j.jmatprotec.2020.116784 ↗
6. Optimization of tungsten carbide processing parameters for laser heating and ultrasonic vibration composite assisted cutting10.1177/0954406218809123 ↗
7. Nd:YAG laser surface hardening of AISI 431 stainless steel; mechanical and metallurgical investigation10.1016/j.optlastec.2019.105617 ↗
8. Study on elliptical vibration cutting10.1016/S0007-8506(07)62158-1 ↗
9. Study of machining accuracy in ultrasonic elliptical vibration cutting10.1016/j.ijmachtools.2004.04.014 ↗
10. Diamond turning of a metal matrix composite with ultrasonic vibrations10.1081/AMP-200055124 ↗
11. Surface properties in ultrasonic vibration assisted turning of particle reinforced aluminium matrix composites10.1016/j.procir.2014.04.022 ↗
12. Enhanced machinability of SiC-reinforced metal-matrix composite with hybrid turning10.1016/j.jmatprotec.2019.01.017 ↗
13. Experimental investigation on ultrasonic vibration-assisted turning of SiCp/Al composites
14. Ultrasonic vibration-assisted scratch characteristics of silicon carbide-reinforced aluminum matrix composites10.1016/j.ceramint.2014.03.073 ↗
15. Material deformation and removal mechanism of SiCp/Al composites in ultrasonic vibration assisted scratch test10.1016/j.ceramint.2018.05.150 ↗
16. Elliptic vibration-assisted cutting of fibre-reinforced polymer composites: understanding the material removal mechanisms10.1016/j.compscitech.2013.12.011 ↗
17. Brittle-to-ductile transition in elliptical vibration-assisted diamond cutting of reaction-bonded silicon carbide10.1016/j.jmapro.2019.08.005 ↗
18. Feasibility study of high-speed ultrasonic vibration cutting titanium alloy10.1016/j.jmatprotec.2017.03.017 ↗
19. Study on Ti-6Al-4V alloy machining applying the non-resonant three-dimensional elliptical vibration cutting10.3390/mi8100306 ↗
20. FE simulation of linear and elliptical ultrasonic vibrations in turning of Inconel 71810.1177/0954408917715533 ↗
21. Influence of vibration parameters on ultrasonic elliptical vibration cutting of reaction-bonded silicon carbide10.1007/s00170-020-05420-9 ↗
22. Feasibility study of ultrasonic elliptical vibration-assisted reaming of carbon fiber reinforced plastics/titanium alloy stacks10.1016/j.ultras.2016.11.011 ↗
23. A UV-crosslinked polymer electrolyte membrane for quasi-solid dye-sensitized solar cells with excellent efficiency and durability10.1039/c3cp00059a ↗
24. Photochemically produced quasi-linear copolymers for stable and efficient electrolytes in dye-sensitized solar cells10.1016/j.jphotochem.2014.05.018 ↗
25. Inferring long-distance connectivity shaped by air-mass movement for improved experimental design in aerobiology10.1038/s41598-021-90733-2 ↗
26. Development of a novel method for the in-situ dechlorination of immovable iron elements: optimization of Cl− extraction yield through experimental design10.1038/s41598-021-90006-y ↗
27. A constitutive model and data for metals subjected to large strains, high strain rates and high temperatures
28. Fracture characteristics of three metals subjected to various strains, strain rates, temperatures and pressures10.1016/0013-7944(85)90052-9 ↗
29. Multi-step 3-D finite element modeling of subsurface damage in machining particulate reinforced metal matrix composites10.1016/j.compositesa.2009.05.017 ↗
30. Fibre debonding and breakage in a whisker-reinforced metal10.1016/0921-5093(95)80005-0 ↗
31. Effect of fibre debonding in a whisker-reinforced metal[J]10.1016/0921-5093(90)90170-8 ↗
32. Machining of particulate-reinforced metal matrix composites: an investigation into the chip formation and subsurface damage10.1016/j.jmatprotec.2019.116315 ↗
33. Experimental and FEM study of cutting mechanism and damage behavior of ceramic particles in orthogonal cutting SiCp/Al composites10.1016/j.ceramint.2020.11.072 ↗
34. The effect of Al2O3, TiN and Ti (C,N) based CVD coatings on tool wear in machining metal matrix composites10.1016/S0257-8972(03)00802-8 ↗
35. Modeling of chip-tool interface friction to predict cutting forces in machining of Al/SiCp composites10.1016/j.ijmachtools.2009.03.003 ↗
36. Analytical model for force prediction when machining metal matrix composite10.1016/j.ijmecsci.2012.03.010 ↗
37. On machining modeling of metal matrix composites: a novel comprehensive constitutive equation10.1016/j.ijmecsci.2016.01.020 ↗
38. An experimental investigation into the orthogonal cutting of unidirectional fibre reinforced plastics10.1016/S0890-6955(03)00090-7 ↗
39. Ultrasonic assisted turning of an aluminium-based metal matrix composite reinforced with SiC particles10.1007/s00170-004-2320-3 ↗
40. Generation of hierarchical micro-structures for anisotropic wetting by elliptical vibration cutting10.1016/j.cirp.2014.03.048 ↗
41. Experimental studies of wettability control on cylindrical surfaces by elliptical vibration texturing10.1007/s00170-014-6384-4 ↗
42. Influence of surface wettability on the tribological properties of laser textured Co-Cr-Mo alloy in aqueous bovine serum albumin solution10.1016/j.apsusc.2012.12.003 ↗