journal article·2023-11Open access

Effects of deep cryogenic treatment on the microstructure evolution, mechanical and thermal fatigue properties of H13 hot work die steel

Jun Li, Xu Zhang, Hengyong Bu, Huarong Qi, Pengpeng Zuo, Shaohong Li, Mengnie Li

Abstract

The service life of hot work die steel is significantly influenced by its microstructure and thermal fatigue properties. This paper explores the impact of deep cryogenic treatment (DCT) on H13 hot work die steel's microstructural evolution and mechanical as well as thermal fatigue properties. The results demonstrate that a portion of unstable retained austenite transforms into martensite during deep cryogenic treatment and numerous finely dispersed carbides precipitate from the matrix, thereby enhancing hardness. Analysis of the average crack length and distribution of thermal fatigue test samples reveals that the average crack length and crack density of DCT-treated samples are lower than those of non-DCT-treated samples. Thermal fatigue cracks in the specimens primarily originated from trigeminal grain boundaries and the carbides are found at the crack tips. DCT facilitates the precipitation of fine and dispersed carbides, imparting a robust pinning effect on boundary migration and thereby impeding the initiation and propagation of thermal fatigue cracks. Furthermore, deep cryogenic treatment results in a reduction in the number of M23C6 type carbides with large particles and an increase in smaller M6C type carbides during the thermal fatigue test. This indicates a positive influence on the carbide distribution and further contributes to the improved thermal fatigue resistance of the hot work die steel.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Metal Alloys Wear and Properties · High Entropy Alloys Studies · Advanced materials and composites

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (48)

Show source-provided references
1. Plasma nitrided and TiCN coated AISI H13 steel by pulsed dc PECVD and its application for hot-working dies10.1016/j.surfcoat.2004.03.048 ↗
2. Study on carbides and their evolution in H13 hot work steel
3. Evaluation of machinability of hardened and cryo-treated AISI H13 hot work tool steel with ceramic inserts10.1016/j.ijrmhm.2013.06.004 ↗
4. Influence of the nitriding time in the wear behaviour of an AISI H13 steel during a crankshaft forging process10.1016/j.wear.2007.02.007 ↗
5. Influence of different surface treatments of H13 hot work die steel on its thermal fatigue behaviors10.1007/s11741-001-0049-x ↗
6. Effect of nitrided-layer microstructure control on wear behavior of AISI H13 hot work die steel10.1016/j.apsusc.2017.03.185 ↗
7. Deep cryogenic treatment of carbide tool and its cutting performances in hard milling of AISI H13 steel10.1016/j.procir.2018.05.019 ↗
8. Effect of laser shock processing with post-machining and deep cryogenic treatment on fatigue life of GH4169 super alloy10.1016/j.ijfatigue.2018.10.012 ↗
9. Emad El-Kashif and Hassan Megahed. Effect of deep cryogenic treatment on wear behavior of cold work tool steel
10. Effect of deep cryogenic treatment on carbide precipitation and mechanical properties of tool steel10.4028/www.scientific.net/SSP.118.9 ↗
11. Correlative surface and bulk analysis of deep cryogenic treatment influence on high-alloyed ferrous alloy10.1016/j.jmrt.2022.11.075 ↗
12. The reinforcement role of deep cryogenic treatment on the strength and toughness of alloy structural steel10.1016/j.msea.2019.138698 ↗
13. Effect of cryogenic treatment on tensile behavior of case carburized steel-815M1710.1016/j.matchar.2006.06.019 ↗
14. Influence of micro-alloying elements and deep cryogenic treatment on microstructure and mechanical properties of S5 cold work shock resisting tool steel10.1016/j.rinma.2023.100374 ↗
15. Influence of the heat treatment on the mechanical and tribological properties of cryogenically treated AISI M2 steel10.1016/j.jmrt.2023.08.309 ↗
16. Effect of cryogenic treatment on the microstructure and mechanical properties of selected laser melted H13 steel10.1016/j.jmrt.2022.11.068 ↗
17. The effect of deep cryogenic treatments on the mechanical properties of an AISI H13 steel10.1016/j.msea.2014.11.051 ↗
18. Carbides precipitation and kinetics of H13 steel subjected to deep cryogenic treatment10.1080/02670836.2022.2079862 ↗
19. Enhancing the corrosion resistance performance of structural steel via a novel deep cryogenic treatment process10.1016/j.vacuum.2018.10.080 ↗
20. Microstructure evolution and mechanical/physical properties of 25# valve alloys steel subjected to deep cryogenic treatment10.1016/j.vacuum.2018.11.056 ↗
21. Effects of deep cryogenic treatment on the wear resistance and mechanical properties of AISI H13 hot-work tool steel10.1007/s11665-015-1712-x ↗
22. Effect of cryogenic treatment on microstructure, mechanical and wear behaviors of AISI H13 hot work tool steel10.1016/j.cryogenics.2010.11.001 ↗
23. Effects of deep cryogenic treatment on microstructural evolution and alloy phases precipitation of a new low carbon martensitic stainless bearing steel during aging10.1016/j.msea.2018.07.012 ↗
24. FEM prediction of retained austenite evolution in cold work die steel during deep cryogenic treatment10.1016/j.matlet.2013.03.046 ↗
25. FEM simulation and experimental verification of temperature field and phase transformation in deep cryogenic treatment10.1016/S1003-6326(11)61480-5 ↗
26. Finite element method based simulation of stress–strain field in the quenching process10.1016/j.msea.2007.05.101 ↗
27. Thermomechanical analysis of deep cryogenic treatment of Navy C-ring specimen10.1007/s11665-014-1239-6 ↗
28. A FEM based framework for simulation of thermal treatments: application to steel quenching10.1016/j.commatsci.2008.04.021 ↗
29. Process modeling for heat treatment: Current Status and Future developments
30. A general equation prescribing the extent of the austenite-martensite transformation in pure iron-carbon alloys and plain carbon steels10.1016/0001-6160(59)90170-1 ↗
31. Influence of deep cryogenic treatment on microstructural evolution and transformation kinetics simulation by finite element method of low‐carbon high‐alloy martensitic‐bearing steel10.1002/srin.202100785 ↗
32. Cryogenic treatment to augment wear resistance of tool and die steels10.1016/S0011-2275(01)00065-0 ↗
33. Effect of deep cryogenic treatment on the carbide precipitation and tribological behavior of D2 steel10.1080/10426910701235934 ↗
34. Influence of deep cryogenic treatment on the thermal decomposition of Fe–C martensite10.1007/s10853-014-8527-2 ↗
35. Bragg's Law diffraction simulations for electron backscatter diffraction analysis10.1016/j.ultramic.2009.04.007 ↗
36. High-speed data acquisition of the cooling curves and evaluation of heat transfer coefficient in quenching process10.1016/j.measurement.2007.10.003 ↗
37. Finite element simulation of deep cryogenic treatment incorporating transformation kinetics10.1016/j.matdes.2012.12.076 ↗
38. Effects of traditional heat treatment and a novel deep cryogenic treatment on microstructure and mechanical properties of low-carbon high-alloy martensitic bearing steel10.1007/s42243-020-00527-5 ↗
39. Cryogenic treatment of metals to improve wear resistance10.1016/0011-2275(82)90085-6 ↗
40. Relations between microstructure and mechanical properties in secondary hardening steels10.1016/0025-5416(79)90038-7 ↗
41. Enhancing the wear resistance of case carburized steel (En 353) by cryogenic treatment10.1016/j.cryogenics.2005.10.004 ↗
42. Simulation and evaluation of thermal fatigue cracking of hot work tool steels10.1016/j.ijfatigue.2004.03.005 ↗
43. Effect of temperature range on thermal-mechanical fatigue properties of P92 steel and fatigue life prediction with a new cyclic softening model10.1016/j.ijfatigue.2019.105226 ↗
44. Anisotropy of thermal fatigue properties of cold-rolled TiNi sheet10.1016/1044-5803(94)90085-X ↗
45. A new model for fatigue failure due to carbide clusters
46. Coarsening behavior of M23C6 carbides after ageing or thermal fatigue in AISI H13 steel with niobium10.1016/j.ijfatigue.2005.06.042 ↗
47. Thermo fatigue cracking of die casting dies10.1016/j.engfailanal.2011.10.005 ↗
48. Effect of aluminizing and oxidation on the thermal fatigue damage of hot work tool steels for high pressure die casting applications10.1016/j.ijfatigue.2018.09.018 ↗