journal article·2024-01Open access

Microstructure evolution and fracture behavior of Ti–6Al–4V fabricated by WAAM-LDM additive manufacturing

Siyu Zhou, Jianfei Zhang, Guang Yang, Yushi Wang, Bobo Li, Da An, Jianshen Zheng, Wenyi Wei

Abstract

WAAM and LDM are two typical DED technologies. WAAM-LDM additive manufacturing technology can achieve the purpose of producing large and complex Ti–6Al–4V components, improving processing efficiency and precision. However, there is a lack of in-depth research on the microstructure evolution mechanism and the fracture behavior of WAAM-LDM samples. Therefore, horizontal and vertical WAAM samples were invoked as the substrate for LDM processes in this study, and the mechanical properties and tensile fracture behavior under different load directions were evaluated. The results show that the samples fabricated by WAAM-LDM manufacturing consist of four zones: WAAM zone, heat affected zone (HAZ), remelting zone (RZ) and LDM zone. WAAM zone mainly composed of coarse colony structure, HAZ and RZ are dominated by α colonies and fine basketweave structure, respectively, and LDM zone consists of acicular α phases and fine basketweave structure. The thickness of α laths shows a trend of ‘WAAM > HAZ > LDM > RZ’. The strengths are greatly improved at the interfaces due to the good metallurgical bonding and finer microstructure. All the fractures locate at WAAM zone during tensile test and propagate along the basketweave structure. These strengths of WAAM-LDM samples under the action of horizontal loading are higher than that of WAAM samples, and all the elongations of WAAM-LDM samples are higher than 10 %.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Additive Manufacturing Materials and Processes · Additive Manufacturing and 3D Printing Technologies · Titanium Alloys Microstructure and Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (42)

Show source-provided references
1. Influence of post-heat treatments on microstructural and mechanical properties of LPBF-processed Ti6Al4V alloy10.1007/s40964-022-00306-6 ↗
2. Effects of laser additive manufacturing on microstructure and crystallographic texture of austenitic and martensitic stainless steels
3. A review on wire arc additive manufacturing: processing parameters, defects, quality improvement and recent advances
4. Influence of microstructure on mechanical properties of laser metal wire-deposited Ti-6Al-4V10.1016/j.msea.2016.07.038 ↗
5. Effect of molten pool size on microstructure and tensile properties of wire arc additive manufacturing of Ti-6Al-4V alloy10.3390/ma10070749 ↗
6. Coaxial laser metal wire deposition of Ti6Al4V alloy: process, microstructure and mechanical properties10.1016/j.jmrt.2022.08.068 ↗
7. Microstructure and mechanical properties of wire and arc additive manufactured Ti-6Al-4V10.1007/s11661-012-1444-6 ↗
8. Deposition quality and efficiency improvement method for additive manufacturing of Ti–6Al–4V using gas metal arc with CMT10.1016/j.jmatprotec.2022.117720 ↗
9. An overview of Direct Laser Deposition for additive manufacturing; Part I: transport phenomena, modeling and diagnostics
10. The role of lattice defects, element partitioning and intrinsic heat effects on the microstructure in selective laser melted Ti-6Al-4V10.1016/j.actamat.2019.01.039 ↗
11. Microstructure homogenizations of Ti-6Al-4V alloy manufactured by hybrid selective laser melting and laser deposition manufacturing10.1016/j.msea.2019.05.049 ↗
12. Directed energy deposition (DED) additive manufacturing: physical characteristics, defects, challenges and applications10.1016/j.mattod.2021.03.020 ↗
13. Microstructure and mechanical properties of forging-additive hybrid manufactured Ti–6Al–4V alloys10.1016/j.msea.2021.140984 ↗
14. A study on the mechanical properties of hybrid parts manufactured by forging and wire arc additive manufacturing10.1016/j.promfg.2020.04.136 ↗
15. Hybrid manufacturing of components from Ti-6Al-4V by metal forming and wire-arc additive manufacturing10.1016/j.jmatprotec.2020.116689 ↗
16. Selective laser melting-wire arc additive manufacturing hybrid fabrication of Ti-6Al-4V alloy: microstructure and mechanical properties10.1016/j.msea.2016.12.065 ↗
17. Microstructure and mechanical properties of LMD–SLM hybrid forming Ti6Al4V alloy10.1016/j.msea.2016.02.069 ↗
18. Study on the interfacial characteristics and crack propagation of 630 stainless steel fabricated by hybrid additive manufacturing (additional DED building on L-PBFed substrate)10.1016/j.msea.2022.142657 ↗
19. Anisotropic tensile behavior of Ti–6Al–4V components fabricated with directed energy deposition additive manufacturing10.1016/j.actamat.2014.12.054 ↗
20. Microstructure evolution and mechanical properties of wrought/wire arc additive manufactured Ti-6Al-4V joints by electron beam welding10.1016/j.matchar.2022.112090 ↗
21. Regionalization of microstructure and mechanical properties of Ti6Al4V transition area fabricated by WAAM-LMD hybrid additive manufacturing10.1016/j.jallcom.2022.167345 ↗
22. Effects of cooling rate on the microstructure and tensile properties of wire-arc additive manufactured Ti–6Al–4V alloy10.1007/s12540-019-00563-1 ↗
23. Microstructure, static properties, and fatigue crack growth mechanisms in Ti-6Al-4V fabricated by additive manufacturing: LENS and EBM10.1016/j.engfailanal.2016.05.036 ↗
24. Evaluation of titanium alloys fabricated using rapid prototyping technologies—electron beam melting and laser beam melting10.3390/ma4101776 ↗
25. Laser and electron beam additive manufacturing methods of fabricating titanium bone implants10.3390/app7070657 ↗
26. Microstructure evolution and grain refinement of Ti-6Al-4V alloy by laser shock processing10.1016/j.apsusc.2015.11.192 ↗
27. Microstructures of laser-deposited Ti–6Al–4V10.1016/j.matdes.2003.09.009 ↗
28. Deciphering the transformation pathway in laser powder-bed fusion additive manufacturing of Ti-6Al-4V alloy
29. Effects of deposition strategies on macro/microstructure and mechanical properties of wire and arc additive manufactured Ti6Al4V10.1016/j.msea.2019.03.001 ↗
30. Microstructure and mechanical properties of as-built and heat-treated Ti-6Al-4V alloy prepared by cold metal transfer additive manufacturing10.1016/j.jmapro.2019.04.012 ↗
31. A review of the wire arc additive manufacturing of metals: properties, defects and quality improvement10.1016/j.jmapro.2018.08.001 ↗
32. Mechanism of stress relaxation and phase transformation in additively manufactured Ti-6Al-4V via in situ high temperature XRD and TEM analyses10.1016/j.actamat.2020.02.056 ↗
33. Microstructural evolution in laser-deposited multilayer Ti-6Al-4V builds: Part I. Microstructural characterization10.1007/s11661-004-0094-8 ↗
34. Mechanical properties and microstructure of a Ti-6Al-4V alloy subjected to cold rolling, asymmetric rolling and asymmetric cryorolling10.1016/j.msea.2017.10.075 ↗
35. Influence of processing on microstructure and mechanical properties of (α+ β) titanium alloys10.1016/S0921-5093(97)00778-8 ↗
36. Study on appearance and mechanical behavior of additively manufacturing of Ti–6Al–4V alloy by using cold metal transfer10.1016/j.cirpj.2021.06.017 ↗
37. Grain boundary discontinuity and performance improvement mechanism of wire arc additive manufactured Ti–6Al–4V10.1016/j.jallcom.2021.159287 ↗
38. Quantitative relationship between anisotropic strain to failure and grain morphology in additively manufactured Ti-6Al-4V10.1016/j.msea.2017.09.017 ↗
39. On the origin of microstructural banding in Ti-6Al4V wire-arc based high deposition rate additive manufacturing10.1016/j.actamat.2018.12.038 ↗
40. Wire based additive layer manufacturing: comparison of microstructure and mechanical properties of Ti–6Al–4V components fabricated by laser-beam deposition and shaped metal deposition10.1016/j.jmatprotec.2011.01.018 ↗
41. Influence of cooling rate and beta grain size on the tensile properties of (alpha+beta) Ti-alloys
42. Lütjering · 2007