journal article·2023-09Open access

Tungsten carbide coating prepared by ultrasonic shot peening to improve the wear properties of magnesium alloys

Xiujie Chen, Xincheng Xie, Yupeng Zhang, Haiyan Wang, Zhongwei Liang

Abstract

To improve the wear properties of magnesium alloys, a novel technique for preparing coatings using ultrasonic shot peening was developed, and tungsten carbide (WC) coatings were prepared for the first time on the magnesium alloys. The surface morphology, microstructure characteristics, and wear properties were investigated. The findings showed that this method deposited a WC coating with a thickness of 20 μm and a surface hardness of 3.24 GPa on the substrate. A 5 μm composite layer and a 425 μm thick hardened layer existed beneath the coating. The formation mechanism of the hardened layer can be interpreted as dislocation slip and grain refinement, resulting in a hardness of 1.96 GPa at the layer’s top. The treated sample exhibited excellent wear resistance due to the high hardness of the WC coating and hardened layer, with a wear volume of 0.737×108 μm3, representing a decrease of 49.52% and 35.29% compared to the untreated and ultrasonic shot peening one. The research provides a novel solution to improve the wear properties of magnesium alloys, and it contributes to enhancing magnesium alloys’ applicability in practical engineering fields such as aerospace, new energy vehicles, and biomedicine while also contributing to meeting the demand for lightweight manufacturing in these fields.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Surface Treatment and Residual Stress · High-Temperature Coating Behaviors · High Entropy Alloys Studies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (41)

Show source-provided references
1. Latest research advances on magnesium and magnesium alloys worldwide10.1016/j.jma.2020.02.003 ↗
2. Additive manufacturing of magnesium alloys
3. The role and significance of Magnesium in modern day research-A review10.1016/j.jma.2021.05.012 ↗
4. Corrosion resistance and tribological behavior of particles reinforced AZ31 magnesium matrix composites developed by friction stir processing10.1016/j.jmrt.2021.01.071 ↗
5. Magnesium matrix composites for biomedical applications: a review10.1016/j.jma.2018.11.001 ↗
6. Synergy of silica sand and waste plastics as thermoplastic composites on abrasive wear characteristics under conditions of different loads and sliding speeds10.1016/j.chemosphere.2023.138233 ↗
7. Effects of tungsten disulfide on microstructure and mechanical properties of AZ91 magnesium alloy manufactured by stir casting10.1016/j.jallcom.2019.153321 ↗
8. The effect of different rare earth elements content on microstructure, mechanical and wear behavior of Mg–Al–Zn alloy10.1016/j.msea.2009.11.061 ↗
9. Wear and corrosion properties of 316L-SiC composite coating deposited by cold spray on magnesium alloy10.1007/s11666-017-0583-0 ↗
10. Thermally sprayed alumina and ceria-doped-alumina coatings on AZ91 Mg alloy10.1016/j.surfcoat.2017.05.096 ↗
11. Local oxynitriding of AZ31 magnesium alloy by atmospheric-pressure plasma treatment at room temperature10.1016/j.jma.2021.11.008 ↗
12. Surface nanocrystallization treatment of AZ91D magnesium alloy by cold spraying shot peening process10.1016/j.surfcoat.2019.04.093 ↗
13. Surface nano-crystallization of AZ91D magnesium alloy induced by laser shock processing10.1016/j.matdes.2015.07.039 ↗
14. Design and characterization of in-situ TiB reinforced TiB/Ti50Zr25Al15Cu10 non-equiatomic medium-entropy alloy composite coating on magnesium alloy by laser cladding10.1016/j.optlastec.2022.108494 ↗
15. Preparation of Ti-Cr and Ti-Cu flame-retardant coatings on Ti-6Al-4V using a high-energy mechanical alloying method: a preliminary research10.1016/j.matdes.2011.09.017 ↗
16. Microstructure and mechanical properties of AlCuNiFeCr high entropy alloy coatings by mechanical alloying10.1016/j.surfcoat.2020.125443 ↗
17. Microstructures and formation mechanism of W-Cu composite coatings on copper substrate prepared by mechanical alloying method10.1016/j.apsusc.2013.06.049 ↗
18. Microstructure and mechanical properties of Ti-Cu amorphous coating synthesized on pure Cu substrate by mechanical alloying method10.1007/s12598-018-1115-x ↗
19. Investigation on WC-Al composite coatings of AZ91 alloy by mechanical alloying10.1179/1743284714Y.0000000664 ↗
20. Influence of milling atmosphere on the structure and magnetic properties of mechanically alloyed Fe40Co30Ni3010.1016/j.matchemphys.2020.123897 ↗
21. Synthesis of Al-B4C composite coating on Ti-6A1-4V alloy substrate by mechanical alloying method10.1016/j.surfcoat.2017.04.042 ↗
22. Using fish scales as a new biosorbent for adsorption of nickel and copper ions from wastewater and investigating the effects of electric and magnetic fields on the adsorption process10.1016/j.chemosphere.2023.137829 ↗
23. Influence of magnetic field on microstructure and properties of TiC/cobalt-based composite plasma cladding coating10.1016/j.surfcoat.2017.07.009 ↗
24. Ultrasound wave assisted removal of Ceftriaxone sodium in aqueous media with novel nano composite g-C(3)N(4)/MWCNT/Bi(2)WO(6) based on CCD-RSM model10.1016/j.ultsonch.2019.01.018 ↗
25. Influence of process parameters of ultrasonic shot peening on surface nanocrystallization and hardness of pure titanium10.1007/s00170-016-9181-4 ↗
26. Localized corrosion behaviour of AA7150 after ultrasonic shot peening: corrosion depth vs. impact energy10.1016/j.corsci.2017.11.008 ↗
27. Simulation of shot dynamics for ultrasonic shot peening: effects of process parameters10.1016/j.ijmecsci.2014.03.006 ↗
28. Nanostructure evolution of reticular nano-TiB whiskers reinforced titanium matrix composite subjected to ultrasonic shot peening10.1016/j.jallcom.2023.169704 ↗
29. Microstructure, corrosion behaviour and thermal stability of AA 7150 after ultrasonic shot peening10.1016/j.surfcoat.2020.126127 ↗
30. The influence of ultrasonic shot peening on the surface roughness, microstructure, and mechanical properties of TC2 thin-sheet10.1016/j.jmrt.2021.08.029 ↗
31. Wear behavior of laser cladded WC-reinforced Ni-based coatings under low temperature10.1016/j.triboint.2022.107939 ↗
32. Effect of WC content on microstructure and properties of high-speed laser cladding Ni-based coating10.1016/j.optlastec.2022.108449 ↗
33. Effect of severe shot peening on corrosion behavior of AZ31 and AZ91 magnesium alloys10.1016/j.jallcom.2018.08.141 ↗
34. Tribological behavior of Ni-Nb amorphous coating fabricated by mechanical alloying method10.1016/j.triboint.2022.108016 ↗
35. Scanning tunneling microscopy of strained-α-Sn(001) surface grown on InSb(001) substrate10.1016/j.apsusc.2021.151347 ↗
36. Synergistic effects of grain refinement and texture weakening on mechanical properties anisotropy of Mg-9Gd-4Y-2Zn-0.4Zr alloy via RUE processing10.1016/j.jmrt.2022.05.045 ↗
37. Influence of ultrasonic peening on microstructure and surface performance of laser-arc hybrid welded 5A06 aluminum alloy joint10.1016/j.jmrt.2020.06.057 ↗
38. Preparation of Cu/CrB2 composites with well-balanced mechanical properties and electrical conductivity by ex-situ powder metallurgy10.1016/j.jmrt.2022.01.112 ↗
39. Improved wear properties of GCr15 steel balls by fabricating a surface Ti diffusion layer using mechanical alloying and NH3·H2O treatment10.1016/j.jmrt.2022.12.042 ↗
40. The effect of contact area on velocity weakening of the friction coefficient and friction instability: a case study on brake friction materials10.1016/j.triboint.2019.02.034 ↗
41. Effect of grain size on friction and wear of nanocrystalline aluminum10.1016/0921-5093(95)10016-4 ↗