Localized corrosion evaluation of newly developed stainless-steel alloys in chloride medium through dynamic and localized micro electrochemical techniques
Source abstract
Abstract
Novel Fe-Cr SS alloys were fabricated by alloying with 0, 0.10 and 0.20 wt-% Sn respectively to investigate the effect of the Sn addition on the microstructure, passive characteristics and localized corrosion behavior in chloride medium at room temperature. The advanced scanning micro-electrochemical techniques along with the traditional electrochemical methods were used for in-depth investigations. Potentiodynamic and potentiostatic test results exhibited that the addition of Sn in SS alloys increased the resistance against pitting corrosion in NaCl medium. The acquired dynamic impedance data confirmed the effective electrochemical stability of the alloy SS3 (SS with 0.20 wt-% Sn) at applied anodic potential, suggesting the presence of a compact and stable passive film in Sn containing alloys, which contributed to their improved localized corrosion resistance in chloride solution. The scanning electrochemical microscopic results corroborated that the alloy SS3 remained stable even after 24 h of exposure and displayed no noticeable surface heterogeneity. A reduced anodic current density in scanning vibrative electrode technique mapping images was observed even after 24-hours of exposure in alloy SS3 compared to other samples, indicating that the anodic metal dissolution was successfully obstructed by forming a compact and dense passive film on this alloy.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Hydrogen embrittlement and corrosion behaviors in metals · Corrosion Behavior and Inhibition · Concrete Corrosion and Durability
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (43)
Show source-provided references
1. Natural passivation behavior and its influence on chloride-induced corrosion resistance of stainless steel in simulated concrete pore solution10.1016/j.jmrt.2020.08.056 ↗
2. The history of the point defect model for the passive state: a brief review of film growth aspects10.1016/j.electacta.2010.11.005 ↗
3. Influence of Cu and Sn content in the corrosion of AISI 304 and 316 stainless steels in H2SO410.1016/j.corsci.2005.05.002 ↗
4. Effect of tin on the corrosion behavior of low-alloy steel in an acid chloride solution10.1016/j.corsci.2009.08.036 ↗
5. Influence of Ti, C and N concentration on the intergranular corrosion behavior of AISI 316Ti and 321 stainless steels10.1016/j.actamat.2006.11.021 ↗
6. Pitting corrosion behaviour of austenitic stainless steels with Cu and Sn additions10.1016/j.corsci.2006.06.004 ↗
7. Effect of alloying tin on the corrosion characteristics of austenitic stainless steel in sulfuric acid and sodium chloride solutions10.1007/s40195-015-0299-4 ↗
8. Effect of tin addition on the microstructure development and corrosion resistance of sintered 304L stainless steels10.1361/105994999770346404 ↗
9. High temperature ductility and corrosion resistance property of novel tin-bearing economic 17Cr–xSn ferritic stainless steel
10. Influence of Sn and Mo on corrosion behavior of ferrite-pearlite steel in the simulated bottom plate environment of cargo oil tank10.1016/j.jmst.2018.11.012 ↗
11. Preparation and characterization of Pectin/Polypyrrole based multifunctional coatings on TiNbZr alloy for orthopaedic applications
12. Hybrid organosilicon-metal oxide composites and their corrosion protection performance for mild steel in 3.5% NaCl solution
13. Dynamic and localized microelectrochemical approaches to evaluate the corrosion resistance of newly developed lean duplex stainless steel alloys
14. Wear and corrosion resistance performance of UHMWPE/GNPs nanocomposite coatings on AA2028 Al alloys
15. Sodium alginate: a promising biopolymer for corrosion protection of API X60 high strength carbon steel in saline medium10.1016/j.carbpol.2017.09.049 ↗
16. Electrochemical frequency modulation (EFM) technique: theory and recent practical applications in corrosion research10.1016/j.molliq.2017.11.006 ↗
17. Effect of functionalization of carbon nanotubes on mechanical and electrochemical behavior of polyaniline nanocomposite coatings10.1016/j.surfcoat.2015.06.036 ↗
18. Influence of laser nitriding on the surface and corrosion properties of Ti-20Nb-13Zr alloy in artificial saliva for dental applications10.1007/s11665-018-3569-2 ↗
19. The effect of powder composition on the microstructure and corrosion resistance of laser cladding 60NiTi alloy coatings on SS 316L10.3390/met11071104 ↗
20. Effect of HAc on the metastable pitting corrosion of 304 SS in NaCl solution10.3390/ma15103618 ↗
21. Growth kinetics of metastable pits on sputtered nanocrystalline stainless steel10.1016/j.corsci.2017.04.028 ↗
22. Insight into microstructure, microhardness and corrosion performance of 2205 duplex stainless steel: effect of plastic pre-strain10.1016/j.corsci.2022.110847 ↗
23. Pit Initiation at single sulfide inclusions in stainless steel I. Electrochemical Microcell Measurements10.1149/1.1474430 ↗
24. Heat treatment, microstructure and corrosion relationship on 316L SS produced by10.1080/02670836.2022.2131242 ↗
25. Corrosion behavior and biocompatibility of additively manufactured 316L stainless steel in a physiological environment: the effect of citrate ions
26. A review on the role of surface nanocrystallization in corrosion of stainless steel10.1016/j.jmrt.2022.05.094 ↗
27. Corrosion and passivation behavior of laser powder bed fusion produced Ti-6Al-4V in static/dynamic NaCl solutions with different concentrations10.1016/j.corsci.2021.109728 ↗
28. The nucleation and growth of corrosion pits on stainless steel10.1016/0010-938X(93)90133-2 ↗
29. Metastable pitting corrosion behavior and characteristics of passive film of laser powder bed fusion produced Ti–6Al–4V in NaCl solutions with different concentrations10.1016/j.corsci.2023.111017 ↗
30. Corrosion resistant and conductive TiN/TiAlN multilayer coating on 316L SS: a promising metallic bipolar plate for proton exchange membrane fuel cell10.1007/s10853-020-05682-4 ↗
31. Insight into microstructure, microhardness and corrosion performance of 2205 duplex stainless steel: effect of plastic pre-strain10.1016/j.corsci.2022.110847 ↗
32. Effect of annealing treatment on microstructure, mechanical property and anti-corrosion behavior of X2CrNi12 ferritic stainless steel10.1016/j.jmrt.2022.02.117 ↗
33. Corrosion and tribo corrosion behaviour of β-type Ti-Nb and Ti-Mo surfaces designed by diffusion treatments for biomedical applications10.1016/j.corsci.2018.06.024 ↗
34. Mechanical, in-vitro corrosion, and tribological characteristics of TiN coating produced by cathodic arc physical vapor deposition on Ti20Nb13Zr alloy for biomedical applications10.1016/j.tsf.2020.138183 ↗
35. Hybrid organosiloxane material/metal oxide composite as efficient anticorrosive coatings for mild steel in a saline medium
36. Influence of thermal treatment on the microstructure, mechanical properties, and corrosion resistance of newly developed Ti20Nb13Zr biomedical alloy in a simulated body environment10.1007/s11665-019-03908-4 ↗
37. Hierarchical graphitic carbon nitride-ZnO nanocomposite: viable reinforcement for the improved corrosion resistant behavior of organic coatings
38. Study of the effects of hydrogen on the pitting processes of X70 carbon steel with SECM10.1016/j.elecom.2010.10.031 ↗
39. Scanning electrochemical microscopy for the investigation of localized degradation processes in coated metals10.1016/j.porgcoat.2010.04.006 ↗
40. Localized corrosion of 304 stainless steel triggered by embedded MnS10.1016/j.corsci.2022.110860 ↗
41. Influence of inhibitor adsorption on readings of microelectrode during SVET measurements
42. Preparation and characterization of Pectin/Polypyrrole based multifunctional coatings on TiNbZr alloy for orthopedic applications
43. Improving corrosion resistance of selective laser melted 316L stainless steel through ultrasonic severe surface rolling10.1016/j.jmrt.2022.09.011 ↗