journal article·2023-09Open access

Effect of heat treatment on microstructure and mechanical properties of 17-4PH stainless steel manufactured by laser-powder bed fusion

Cong Li, Yunlong Chen, Xiaoyong Zhang, Tingting Liu, Yong Peng, Kehong Wang

Abstract

The 17-4 precipitation-hardened (PH) stainless steel was prepared by laser-powder bed fusion (L-PBF), and the effects of different aging temperatures on the microstructures and properties of 17-4PH stainless steel were systematically studied. The results show that the 17-4PH stainless steel prepared by laser powder bed fusion requires a solid solution treatment in order to obtain the lath martensite structure, and then the niobium carbides and ε-Cu phase nanoparticles were precipitated by aging treatment to improve the strength of 17-4PH stainless steel. When the aging heat treatment parameter is 450°C/5h, the mechanical properties of the 17-4PH stainless steel is better, and the ultimate tensile strength (UTS) and elongation (El) are 1387 MPa and 7.3%, respectively. Compared with the as-printed 17-4PH stainless steel, the ultimate tensile strength of aging heat treatment exhibits an increase of 25.2%, and then, as the increase of aging temperature, the niobium carbides and ε-Cu precipitation phase become coarser, resulting in a decrease in the strength of 17-4PH stainless steel and an increase in plasticity.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Additive Manufacturing Materials and Processes · Welding Techniques and Residual Stresses · High Entropy Alloys Studies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (32)

Show source-provided references
1. Microstructural evolution and strain hardening behavior of heat-treated 17-4 PH stainless steel
2. Achieving high strength and ductility in 17-4 PH steel with a periodic layer structure by laser direct metal depositing and aging10.1016/j.msea.2021.141787 ↗
3. Inflfluence of microstructure and manganese sulfifides on corrosion resistance of selective laser melted 17-4 PH stainless steel in acidic chloride medium10.1016/j.corsci.2020.108585 ↗
4. The effects of sintering temperature and hold time on densification, mechanical properties and microstructural characteristics of binder jet 3D printed 17-4 PH stainless steel
5. On the microstructure and texture evolution in 17-4 PH stainless steel during laser powder bed fusion: towards textural design10.1016/j.jmst.2021.12.015 ↗
6. Steels in additive manufacturing: a review of their microstructure and properties10.1016/j.msea.2019.138633 ↗
7. Heat treatment response of additively manufactured 17-4PH stainless steel10.1016/j.matchar.2023.112661 ↗
8. Microstructure and mechanical properties of Ti6Al4V/B4C titanium matrix composite fabricated by selective laser melting (SLM)10.1016/j.jmrt.2023.01.126 ↗
9. Effect of laser scan length on the microstructure of additively manufactured17-4PH stainless steel thin-walled parts
10. Microstructure and property of a selective laser melting process induced oxide dispersion strengthened 17-4 PH stainless steel10.1016/j.jallcom.2019.06.289 ↗
11. Wear of 17-4 PH stainless steel patterned surfaces fabricated using selective laser melting10.3390/app11199317 ↗
12. Novel phenomena of graphene secondary dispersion and phase transformation in selective laser melting of 15-5PH/graphene composites
13. Effect of manufacturing parameters on the mechanical and corrosion behavior of selective laser-melted 15-5PH stainless steel10.1002/srin.201900447 ↗
14. Laser powder bed fusion of 17–4 PH stainless steel: a comparative study on the effect of heat treatment on the microstructure evolution and mechanical properties
15. Mechanical properties and microstructural characterization of selective laser melted 17-4 PH stainless steel10.1108/RPJ-12-2015-0192 ↗
16. Effect of solution temperature on the microstructure and properties of 17-4PH high-strength steel samples formed by selective laser melting10.3390/met12030425 ↗
17. Effects of aging treatment on the precipitation behavior of ε-Cu phase and mechanical properties of metal injection molding 17-4PH stainless steel10.1016/j.matlet.2018.11.107 ↗
18. Precipitation induced changes in microstrain and its relation with hardness and tempering parameter in 17-4 PH stainless steel10.1007/s11661-016-3440-8 ↗
19. Laser defocusing effect on the microstructure and defects of 17-4PH parts additively manufactured by SLM at a low energy input10.3390/met11040588 ↗
20. Nano-precipitates evolution and their effects on mechanical properties of 17-4 precipitation-hardening stainless steel10.1016/j.actamat.2018.06.031 ↗
21. Microstructures and properties of 17-4 PH stainless steel fabricated by selective laser melting10.1016/S2238-7854(12)70029-7 ↗
22. Microstructures, properties, and applications of laser sintered 17-4PH stainless steel10.1111/jace.16372 ↗
23. Effects of powder characteristics and processing conditions on the corrosion performance of 17-4 PH stainless steel fabricated by laser-powder bed fusion10.1007/s40964-018-0048-0 ↗
24. Effects of particle characteristics on the microstructure and mechanical properties of 17-4 PH stainless steel fabricated by laser-powder bed fusion10.1016/j.powtec.2018.03.025 ↗
25. Normalizing effect of heat treatment processing on 17-4 PH stainless steel manufactured by powder bed fusion10.3390/met12050704 ↗
26. Comparing corrosion behavior of additively manufactured Cr-rich stainless steel coating between conventional and extreme high-speed laser metal deposition10.1016/j.corsci.2021.109976 ↗
27. Additive manufacturing of 17-4 PH stainless steel: post-processing heat treatment to achieve uniform reproducible microstructure10.1007/s11837-015-1754-4 ↗
28. Study of microstructure and mechanical properties of 17-4 PH stainless steel produced via Binder Jetting10.1080/00325899.2023.2202950 ↗
29. The role of lattice defects, element partitioning and intrinsic heat effects on the microstructure in selective laser melted Ti-6Al-4V10.1016/j.actamat.2019.01.039 ↗
30. Ultrastrong steel via minimal lattice misfit and high-density nanoprecipitation10.1038/nature22032 ↗
31. Alloy design by dislocation engineering10.1016/j.jmst.2017.11.045 ↗
32. Designing ultrastrong maraging stainless steels with improved uniform plastic strain via controlled precipitation of coherent nanoparticles10.1016/j.jmst.2021.04.011 ↗