Optimizing the strength and ductility of pure aluminum laminate via tailoring coarse/ultrafine grain layer thickness ratio
Source abstract
Abstract
Ultrafine-grained (UFG) materials typically exhibit high strength but disappointingly low ductility due to the limited dislocation accumulation. To evade the strength-ductility tradeoff of UFG pure aluminum (Al), four kinds of UFG/coarse-grained (CG)/UFG sandwich-structured pure Al laminates were designed via extrusion and cold rolling. Microstructure characterization displayed that the grain size of the CG in the four designed laminates always remained ∼5 times that of UFG, indicating significant grain size heterogeneity between the constituent layers. The finite element analysis indicated that as the CG/UFG layer thickness ratio increased, the distribution of residual stress between the constituent layers was inhomogeneous and became more pronounced near the interface, which reduced the tensile ductility of the laminates. Tensile tests indicated that when the CG:UFG layer thickness ratio was 1:3, the laminate obtained a desirable strength and ductility compared to other laminates and UFG sample, with a yield strength of 150 MPa and a tensile ductility of 13.5 %. The optical microscope (OM)-digital image correlation (DIC) results revealed that the significant strain gradient near the layer interface caused by the heterogeneous deformation contributed to hetero-deformation induced (HDI) strengthening and HDI strain hardening, thereby strengthening and toughening the laminate.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Microstructure and mechanical properties · Aluminum Alloys Composites Properties · Metal Forming Simulation Techniques
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (52)
Show source-provided references
1. Progress in structural materials for aerospace systems10.1016/j.actamat.2003.08.023 ↗
2. Review of recent trends in friction stir welding process of aluminum alloys and aluminum metal matrix composites10.1016/S1003-6326(21)65730-8 ↗
3. Review on superior strength and enhanced ductility of metallic nanomaterials10.1016/j.pmatsci.2018.02.002 ↗
4. Heterogeneous lamella structure unites ultrafine-grain strength with coarse-grain ductility10.1073/pnas.1517193112 ↗
5. Microstructure and strength of commercial purity aluminium (AA 1200) cold-rolled to large strains10.1016/S1359-6454(02)00174-X ↗
6. Annealing behaviour of ultrafine-grained aluminium10.1080/14786435.2013.856526 ↗
7. High tensile ductility and strength in dual-phase bimodal steel through stationary friction stir processing10.1038/s41598-019-38707-3 ↗
8. Extra strengthening and strain hardening in coarse-grain/ultrafine-grain laminates10.1016/j.matlet.2020.127858 ↗
9. Ductility and strain hardening in gradient and lamellar structured materials10.1016/j.scriptamat.2020.05.025 ↗
10. Perspective on hetero-deformation induced (HDI) hardening and back stress10.1080/21663831.2019.1616331 ↗
11. Revealing extra strengthening and strain hardening in heterogeneous two-phase nanostructures10.1016/j.ijplas.2019.11.005 ↗
12. Introduction to heterostructured materials: a fast emerging field10.1007/s11661-021-06438-8 ↗
13. Effect of heterostructure and hetero-deformation induced hardening on the strength and ductility of brass10.1016/j.actamat.2020.01.037 ↗
14. Synergetic strengthening by gradient structure10.1080/21663831.2014.935821 ↗
15. Synergistic enhancement of strength, ductility, and toughness in a low carbon micro-alloy steel with an ultrafine-grained heterogeneous lamellar structure10.1016/j.msea.2023.145205 ↗
16. Tailoring AZ91 laminates for combination of strength and ductility10.1016/S1003-6326(21)65758-8 ↗
17. A new strategy to simultaneous increase in the strength and ductility of AA2024 alloy via accumulative roll bonding (ARB)10.1016/j.msea.2016.01.020 ↗
18. Trimodal grain structure enables high-strength CNT/Al-Cu-Mg composites higher ductility by powder assembly & alloying10.1080/21663831.2020.1818324 ↗
19. The Role of Interfaces on the deformation mechanisms in bimodal Al laminates produced by accumulative roll bonding10.1002/adem.202000145 ↗
20. Simultaneous improvement of strength and toughness in Al-Zn-Mg-Cu/pure Al laminated composite via heterogeneous microstructure10.1016/j.msea.2023.145362 ↗
21. Effect of two-step annealing on recrystallized structure and mechanical properties in AA7075/AA1100 laminated metal composites processed by accumulative roll bonding10.1016/j.matchar.2019.109951 ↗
22. Multiscale interfacial structure strengthening effect in Al alloy laminated metal composites fabricated by accumulative roll bonding10.1016/j.msea.2019.138354 ↗
23. Open-source 2D digital image correlation Matlab software10.1007/s11340-015-0009-1 ↗
24. Mechanical behavior, deformation mechanism and microstructure evolutions of ultrafine-grained Al during recovery via annealing10.1016/j.msea.2019.138706 ↗
25. Grain refinement and mechanical properties of pure aluminum processed by accumulative extrusion bonding10.1016/S1003-6326(19)64953-8 ↗
26. Microstructure and mechanical properties of ultra-fine grains (UFGs) aluminum strips produced by ARB process10.1016/j.jallcom.2008.06.161 ↗
27. Strain hardening and ductility in a coarse-grain/nanostructure laminate material10.1016/j.scriptamat.2015.03.006 ↗
28. Tailoring heterogeneities in high-entropy alloys to promote strength-ductility synergy10.1038/s41467-019-13311-1 ↗
29. Tensile and compressive deformation behaviors of commercially pure Al processed by equal-channel angular pressing with different dies10.1016/j.msea.2008.05.041 ↗
30. Microstructure evolution and mechanical properties of pure aluminum deformed by equal channel angular pressing and direct extrusion in one step through an integrated die10.1016/j.msea.2014.11.089 ↗
31. Contributions to yield strength in an ultrafine grained 1050 aluminum alloy after DC current annealing10.1016/j.msea.2016.06.084 ↗
32. Investigation of ultrafine grained AA1050 fabricated by accumulative roll bonding10.1016/j.msea.2014.07.032 ↗
33. Mechanical behavior and microstructural evolution upon annealing of the accumulative roll-bonding (ARB) processed Al alloy 110010.1016/j.msea.2007.07.022 ↗
34. Strengthening mechanisms in nanostructured high-purity aluminium deformed to high strain and annealed10.1016/j.actamat.2009.05.017 ↗
35. Influence of upscaling accumulative roll bonding on the homogeneity and mechanical properties of AA1050A10.1007/s10853-013-7648-3 ↗
36. Severe plastically deformed commercially pure aluminum: substructure, micro-texture and associated mechanical response during uniaxial tension10.1016/j.msea.2019.138195 ↗
37. Rapid hardening induced by electric pulse annealing in nanostructured pure aluminum10.1016/j.scriptamat.2011.10.023 ↗
38. Microstructure, texture and mechanical properties of AA1060 aluminum plate processed by snake rolling10.1016/j.matdes.2015.11.054 ↗
39. Controlled annealing of sandwich-structured aluminum AA1050 for optimized combinations of strength and ductility10.1016/j.msea.2018.07.065 ↗
40. Deformation and fracture mechanisms in fine- and ultrafine-grained ferrite/martensite dual-phase steels and the effect of aging10.1016/j.actamat.2010.10.002 ↗
41. Revealing extraordinary intrinsic tensile plasticity in gradient nano-grained copper10.1126/science.1200177 ↗
42. Revealing fracture mechanisms of medium manganese steels with and without delta-ferrite10.1016/j.actamat.2018.11.029 ↗
43. Maximizing necking-delayed fracture of sandwich-structured Ni/Cu/Ni composites10.1016/j.scriptamat.2017.02.032 ↗
44. Interface affected zone for optimal strength and ductility in heterogeneous laminate10.1016/j.mattod.2018.03.006 ↗
45. Critical microstructures and defects in heterostructured materials and their effects on mechanical properties10.1016/j.actamat.2020.03.001 ↗
46. Towards enhanced strength-ductility in pure copper by fabricating hetero grain composite laminates10.1016/j.jallcom.2022.167192 ↗
47. Modelling of strain rate dependent dislocation behavior of CNT/Al composites based on grain interior/grain boundary affected zone (GI/GBAZ)10.1016/j.msea.2021.141547 ↗
48. Investigation of mechanical properties and microstructural evolution in Cu-Al alloys with gradient structure
49. Heterogeneous materials: a new class of materials with unprecedented mechanical properties10.1080/21663831.2017.1343208 ↗
50. Superior strength–ductility synergy in three-dimensional heterogeneous-nanostructured metals10.1016/j.actamat.2023.119143 ↗
51. Heterostructured materials: superior properties from hetero-zone interaction10.1080/21663831.2020.1796836 ↗
52. Heterostructured materials10.1016/j.pmatsci.2022.101019 ↗