Performance of carbon fiber (CF)/Ceiba petandra fiber (CPF) reinforced hybrid polymer composites for lightweight high-performance applications
Source abstract
Abstract
Natural and synthetic fibers have their own advantages and disadvantages. For this reason, hybridization was performed to combine the two fibers to get composite reinforcement with high mechanical properties. It is used to synergize the two fibers aiming to create a higher performance than that of natural fiber-reinforced composites. This study used carbon fiber and natural fiber namely Ceiba petandra fiber (CPF). Compared to hybrid and CPF reinforced composites, carbon fiber (CF)-reinforced composites had superior mechanical properties, especially in terms of tensile and flexural characteristics. However, it is more brittle and expensive. In contrast, CPF composite has the lowest tensile strength, flexural quality, and abundance. The optimal value was shown in CF/CPF reinforced hybrid composites with a composition of 15 % CF and 15 % CPF, with tensile and flexural strength reaching 130.16 ± 17.37 MPa and 98.53 ± 12.2 MPa. Hybrid composite improves the thermal stability of the composite. Findings showed that incorporating natural and synthetic fibers produced composite materials with acceptable and ideal mechanical performance.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Natural Fiber Reinforced Composites · Tribology and Wear Analysis · Mechanical Engineering and Vibrations Research
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (54)
Show source-provided references
1. Mechanical properties of longitudinal basalt/woven-glass-fiber-reinforced unsaturated polyester-resin hybrid composites10.3390/polym12102211 ↗
2. Review on comparative evaluation of fiber reinforced
3. 2002 · vol. 2
4. A review: fibres, polymer matrices and composites
5. Unsaturated polyester resin concrete: a review10.1016/j.conbuildmat.2019.116709 ↗
6. Mechanical characterization of polyester resin composite with natural fibers
7. Enhanced physico-mechanical properties of polyester resin film using CaCO3 filler10.1007/s12221-016-5612-y ↗
8. Natural fiber as a substitute to synthetic fiber in polymer composites: a review
9. A review on natural fibers for development of eco-friendly bio-composite: characteristics, and utilizations10.1016/j.jmrt.2021.06.014 ↗
10. A study on moisture absorption and swelling in bio-based jute-epoxy composites10.1177/0731684411434654 ↗
11. Environment friendly, renewable and sustainable poly lactic acid (PLA) based natural fiber reinforced composites – a comprehensive review
12. Tensile properties hybrid effect of unidirectional flax/carbon fiber hybrid reinforced polymer composites
13. A review of carbon fiber materials in automotive industry10.1088/1757-899X/971/3/032011 ↗
14. Morphology and properties of hybrid composites based on polypropylene/polylactic acid blend and bamboo fiber10.1016/j.biortech.2010.05.007 ↗
15. Effect of water absorption on Mode I interlaminar fracture toughness of flax/basalt reinforced vinyl ester hybrid composites10.1016/j.compstruct.2017.02.081 ↗
16. Studies on tensile and flexural properties of short banana/glass hybrid fiber reinforced polystyrene composites10.1177/0021998308092194 ↗
17. Mechanical property evaluation of sisal-jute-glass fiber reinforced polyester composites10.1016/j.compositesb.2012.12.004 ↗
18. Numerical methods for nanophotonics: standard problems and future challenges10.1002/lpor.201500122 ↗
19. Experimental investigation of mechanical properties of bamboo/carbon fiber reinforced hybrid polymer matrix composites
20. Effect of various kenaf fiber content on the mechanical properties of composites10.15282/jmes.10.3.2016.2.0208 ↗
21. Effect of Al2O3 on the tensile and impact strength of flax/unsaturated polyester composite with emphasis on automobile body applications
22. Improvement in mechanical properties of jute fibres through mild alkali treatment as demonstrated by utilisation of the Weibull distribution model10.1016/j.biortech.2011.11.073 ↗
23. Physical, mechanical and thermal properties of sugar palm yarn fibre loading on reinforced unsaturated polyester composites10.21315/jps2017.28.3.8 ↗
24. Physicochemical and thermal properties of Ceiba pentandra bark fiber10.1080/15440478.2017.1369208 ↗
25. Natural fibres: types and properties
26. PHYSICO-MECHANICAL characterisation of wood plastic composites produced from indigenous trees in Nigeria
27. Flammability and mechanical properties of Timoho fiber-reinforced polyester composite combined with iron powder filler10.1016/j.jmrt.2022.09.025 ↗
28. Characterisation of swellability and compressive and impact strength properties of corn husk fibre composites10.1016/j.coco.2020.01.009 ↗
29. Investigation of physico-chemical properties of alkali-treated prosopis juliflora fibers
30. Extraction and characterization of calotropis gigantea bast fibers as novel reinforcement for composites materials10.1080/15440478.2017.1349019 ↗
31. Tensile properties and microstructure of single-cellulosic bamboo fiber strips after alkali treatment10.3390/fib8050026 ↗
32. Characterisation of natural cellulosic fibre from Pennisetum purpureum stem as potential reinforcement of polymer composites10.1016/j.matdes.2015.10.052 ↗
33. Characterization of Timoho Fiber as a reinforcement in green composite10.1016/j.jmrt.2021.05.049 ↗
34. 2014
35. 2002
36. Development of sugar palm yarn/glass fibre reinforced unsaturated polyester hybrid composites10.1088/2053-1591/aabc27 ↗
37. The interconnection of carbon active addition on mechanical properties of hybrid agel/glass fiber-reinforced green composite10.3390/polym15112411 ↗
38. Hsu · 2008
39. A mechanical and environmental assessment and comparison of basalt fibre reinforced polymer (BFRP) rebar and steel rebar in concrete beams10.1016/j.egypro.2017.03.005 ↗
40. Effect of organics corrosion inhibitors on the corrosion of 304SS in 3.5% NaCl
41. Properties of organic and inorganic filler hybridization on Timoho Fiber‐reinforced polyester polymer composites
42. Effect of bio-fibers and inorganic fillers reinforcement on mechanical and thermal characteristics on carbon-kevlar-basalt-innegra fiber bio/synthetic epoxy hybrid composites10.1016/j.jmrt.2023.02.162 ↗
43. A review on fibres and fillers on improving the mechanical behaviour of fibre reinforced polymer composites
44. Development and charecterization of natural fiber/carbon fiber reinforced hybrid composite material
45. Evaluation of the effects of fluids upon the flexural and parallel-plate loading behavior of glass fiber reinforced-vinyl ester resin matrix composite pipes10.1590/1516-1439.285614 ↗
46. Hybridization effect of basalt and carbon fibers on impact and flexural properties of phenolic composites10.1007/s13726-014-0272-5 ↗
47. Mechanical behavior of carbon/flax hybrid composites for structural applications10.1177/0021998311429884 ↗
48. Sisal/carbon fibre reinforced hybrid composites: tensile, flexural and chemical resistance properties
49. Thin hybrid hemp/carbon fiber composites: manufacturing, flexural, and impact behavior
50. Mechanical properties of hybrid composites reinforced by carbon fiber and high-strength and high-modulus polyimide fiber10.1016/j.polymer.2020.122830 ↗
51. Viscosimetric and rheological properties of epoxy resin TGEUBA and their composite (TGEUBA/MDA/TGEMDA+TSP)10.1016/j.rineng.2019.100058 ↗
52. A review on the thermal characterisation of natural and hybrid fiber composites10.3390/polym13244425 ↗
53. Progress and challenges in sustainability, compatibility, and production of eco-composites: a state-of-art review
54. Tailoring interfacial adhesion in basalt fibre reinforced polymer composites