Effects of the graphene content on mechanical properties and corrosion resistance of aluminum matrix composite
Source abstract
Abstract
Graphene with excellent mechanical and physical properties has shown its great application potential in aluminum matrix composites. In this paper, graphene oxide nanosheets with negative charges were fabricated by the Hummers' method and they are absorbed on the treated aluminum powders with positive charges by electrostatic self-assembly. Then, graphene reinforced aluminum matrix composites (Gr/Al) were prepared by powder metallurgy. The effects of the Gr content on mechanical performance and corrosion resistance were investigated. The results show that Gr is distributed at the boundary and bonds well with aluminum in Gr/Al composite. Mechanical properties of the composite initially increase then decrease with the increase of Gr content. When the Gr content reaches 0.3 wt%, the ultimate tensile strength reaches 110 MPa and the wear coefficient is 0.39. However, the corrosion resistance decreases with increasing the Gr content and the corrosion mechanism is also investigated in details.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Aluminum Alloys Composites Properties · Electromagnetic wave absorption materials · Graphene research and applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (37)
Show source-provided references
1. Experimental and theoretical studies toward superior anti-corrosive nanocomposite coatings of aminosilane wrapped layer-by-layer graphene oxide@MXene/waterborne epoxy10.1021/acsami.2c14145 ↗
2. Flexible and stretchable temperature sensors fabricated using solution-processable conductive polymer composites
3. Effect of graphene nanosheets on microstructure and corrosion resistance of ADC12 alloy10.1007/s11665-022-07363-6 ↗
4. Preparation and properties of electrodeposited Ni-B-graphene oxide composite coatings10.3390/ma15062287 ↗
5. Size effects of graphene sheets on the strengthening mechanism of Al-graphene composites: a molecular dynamics study10.1016/j.apsusc.2022.153546 ↗
6. Uniform dispersion and interface analysis of nickel coated graphene nanoflakes/pure titanium matrix composites10.1016/j.carbon.2018.05.013 ↗
7. Microstructure and properties of copper coated graphene nanoplates reinforced Al matrix composites developed by low temperature ball milling10.1016/j.carbon.2019.12.029 ↗
8. Interface design of graphene/copper composites by matrix alloying with titanium10.1016/j.matdes.2018.02.038 ↗
9. Enhanced mechanical properties and electrical conductivity of graphene nanoplatelets/Cu composites by in situ formation of Mo2C nanoparticles10.1016/j.msea.2019.138365 ↗
10. Effect of ball milling time on graphene nanosheets reinforced Al6063 composite fabricated by pressure infiltration method10.1016/j.carbon.2018.09.041 ↗
11. Achieving homogeneous distribution of highcontent graphene in aluminum alloys via high-temperature cumulative shear deformation10.1016/j.matdes.2020.108796 ↗
12. Microstructures and compressive properties of Al matrix composites reinforced with bimodal hybrid in-situ nano-/micro-sized TiC particles10.3390/ma11081284 ↗
13. High-content graphene nanoplatelet reinforced aluminum composites produced by ball milling and hot extrusion10.1007/s11431-020-1670-4 ↗
14. Tribological properties of copper matrix composites reinforced with homogeneously dispersed graphene nanosheets10.1016/j.jmst.2018.02.010 ↗
15. Preparation and tribological properties of homogeneously dispersed graphene-reinforced aluminium matrix composites10.1080/02670836.2018.1446869 ↗
16. Effect of heat treatment on interfacial bonding and strengthening efficiency of graphene in GNP/Al composites10.1016/j.compositesa.2019.04.010 ↗
17. Fabrication of aluminum matrix composites reinforced with Ni-coated graphene nanosheets10.1016/j.msea.2019.03.068 ↗
18. Preparation and characterization of Cu/(WC-TiC-Co)/graphene nano-composites as a suitable material for heat sink by powder metallurgy method10.1016/j.ijrmhm.2018.11.007 ↗
19. Raman study of D* band in graphene oxide and its correlation with reduction10.1016/j.apsusc.2020.147990 ↗
20. Reaction-free interface promoting strength-ductility balance in graphene nanosheet/Al composites10.1016/j.carbon.2019.11.010 ↗
21. Strengthening effect induced by interfacial reaction in graphene nanoplatelets reinforced aluminum matrix composites10.1016/j.jallcom.2020.156282 ↗
22. A bottom-up strategy toward metal nanoparticles modified graphene nanoplates for fabricating aluminum matrix composites and interface study10.1016/j.jmst.2019.09.045 ↗
23. Nucleation and growth mechanisms of interfacial carbide in graphene nanosheet/Al composites10.1016/j.carbon.2020.01.032 ↗
24. Manipulating mechanical properties of graphene/Al composites by an in-situ synthesized hybrid reinforcement strategy10.1016/j.jmst.2021.12.072 ↗
25. Fabrication of aluminum matrix composites reinforced with Ni-coated graphene nanosheets10.1016/j.msea.2019.03.068 ↗
26. Application of a novel method for fabrication of graphene reinforced aluminum matrix nanocomposites: synthesis, microstructure, and mechanical properties10.1016/j.msea.2019.138820 ↗
27. Enhanced strength in reduced graphene oxide/nickel composites prepared by molecular-level mixing for structural applications10.1007/s00339-014-8909-y ↗
28. Interfacial reinforcement of composites by the electrostatic self-assembly of graphene oxide and NH3 plasma-treated carbon fiber10.1016/j.apsusc.2022.152717 ↗
29. Enhancing the combustion properties of interface optimized metastable intermixed composites PVDF/l-Al by noncovalently functionalized graphene10.1016/j.matdes.2022.111103 ↗
30. Preparation and tensile properties of homogeneously dispersed graphene reinforced aluminum matrix composites10.1016/j.matdes.2016.01.034 ↗
31. A concise review on GO, rGO and metal oxide/rGO composites: fabrication and their supercapacitor and catalytic applications10.1016/j.jallcom.2023.169588 ↗
32. Appropriate conditions for preparing few-layered graphene oxide and reduced graphene oxide10.1080/1536383X.2016.1247268 ↗
33. Microstructure and phase transformation behavior of Al2O3-ZrO2 under microwave sintering10.1016/j.ceramint.2022.09.376 ↗
34. Sintering properties of tetragonal zirconia nanopowder preparation of the NaCl plus KCl binary system by the sol-gel-flux method10.1021/acssuschemeng.2c05908 ↗
35. Influence of surfactant type on the dispersion state and properties of graphene nanoplatelets reinforced aluminium matrix nanocomposites10.1080/1536383X.2017.1362396 ↗
36. Investigation of microstructural, mechanical and corrosion properties of graphene nanoplatelets reinforced Al matrix composites10.1088/2053-1591/ab511f ↗
37. Microstructure and wear resistance of graphene-reinforced aluminum matrix composites