Corrosion behavior of iron-based and Ni-based alloys melted in NaCl–MgCl2–KCl mixed molten salt under vacuum atmosphere
Source abstract
Abstract
In this work, static immersion and gravimetric methods were used to study the corrosion behavior of three common stainless steels and four Ni-based alloys in a NaCl–MgCl2–KCl mixed molten salt under vacuum atmosphere. The corrosion test was conducted at 700 °C, with a maximum exposure time of 100 h. Corrosion behavior was determined by measuring the mass loss of the sample at different time intervals and the corrosion rates at 100 h. The microstructure of the alloy was analyzed by scanning electron microscopy (SEM), energy dispersive spectroscopy (EDS), atomic force microscope (AFM), and X-ray diffraction (XRD). The results showed that stainless steels were generally more severely corroded than Ni-based alloys. 304 stainless steel and In800H exhibited the worst corrosion resistance, whereas Ni-based alloy In625 had the best corrosion resistance. Fe and Cr were dissolved in the molten chloride salts and reacted with the molten chloride salts. Mo played a positive role in suppressing the corrosion of the alloys in molten chloride salts by inhibiting the outward diffusion of the elements.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Molten salt chemistry and electrochemical processes · Phase Change Materials Research · Metallurgical Processes and Thermodynamics
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (44)
Show source-provided references
1. Progress in research and development of molten chloride salt technology for next generation concentrated solar power plants10.1016/j.eng.2020.06.027 ↗
2. Heat transfer fluids for concentrating solar power systems – a review10.1016/j.apenergy.2015.01.125 ↗
3. Influence of the heat transfer fluid in a CSP plant molten salts charging process10.1016/j.renene.2017.05.083 ↗
4. High-temperature stability of nitrate/nitrite molten salt mixtures under different atmospheres10.1016/j.apenergy.2018.05.101 ↗
5. High-temperature molten salts for solar power application10.1016/B978-0-12-398538-5.00020-2 ↗
6. Hot corrosion behavior of commercial alloys in thermal energy storage material of molten MgCl2/KCl/NaCl under inert atmosphere10.1016/j.solmat.2018.04.025 ↗
7. Molten chloride salts for next generation CSP plants: electrolytical salt purification for reducing corrosive impurity level10.1016/j.solmat.2019.04.021 ↗
8. Mainstreaming commercial CSP systems: a technology review10.1016/j.renene.2019.03.049 ↗
9. Jonemann · 2011
10. Impact of the additive manufacturing process on the high-temperature corrosion of 316L steel in the presence of NaCl–KCl–ZnCl2 molten solar salt10.1016/j.jmrt.2022.08.140 ↗
11. Microstructural and selective dissolution analysis of 316L austenitic stainless steel10.1016/j.jmrt.2021.10.009 ↗
12. Corrosion of alloys in a chloride molten salt (NaCl-LiCl) for solar thermal technologies10.1016/j.solmat.2016.05.052 ↗
13. Vapor pressure and corrosivity of ternary metal-chloride molten-salt based heat transfer fluids for use in concentrating solar power systems10.1016/j.apenergy.2015.08.131 ↗
14. Engineering molten MgCl2–KCl–NaCl salt for high-temperature thermal energy storage: review on salt properties and corrosion control strategies10.1016/j.solmat.2021.111344 ↗
15. Ambrosek · 2011
16. Corrosion resistance of Hastelloys in molten metal-chloride heat-transfer fluids for concentrating solar power applications10.1016/j.solener.2014.02.002 ↗
17. Molten chloride technology pathway to meet the U.S. DOE sunshot initiative with Gen3 CSP
18. Assessment of a novel ternary eutectic chloride salt for next generation high-temperature sensible heat storage10.1016/j.enconman.2018.04.100 ↗
19. Design and thermal properties of a novel ternary chloride eutectics for high-temperature solar energy storage10.1016/j.apenergy.2015.07.022 ↗
20. Thermal energy storage using chloride salts and their eutectics10.1016/j.applthermaleng.2016.07.046 ↗
21. Corrosion mechanisms of ferritic-martensitic P91 steel and Inconel 600 nickel-based alloy in molten chlorides. Part II: NaCl-KCl-MgCl2 ternary system10.1016/j.solmat.2020.110675 ↗
22. Corrosion behavior of Ni-based alloys in molten NaCl-CaCl2 -MgCl2 eutectic salt for concentrating solar power10.1016/j.solmat.2017.05.050 ↗
23. Ni-Mo-Cr alloy corrosion in molten NaCl-KCl-MgCl2 salt and vapour10.1016/j.corsci.2020.109183 ↗
24. Assessment of effects of Mg treatment on corrosivity of molten NaCl-KCl-MgCl2 salt with Raman and Infrared spectra10.1016/j.corsci.2019.108350 ↗
25. Corrosion behavior of 316SS and Ni-based alloys in a ternary NaCl-KCl-MgCl2 molten salt10.1016/j.solener.2018.06.094 ↗
26. Hot corrosion behavior of additively manufactured stainless steel 316L and Inconel 718 in MgCl2/KCl/NaCl chloride salts at 700 °C10.1016/j.corsci.2022.110561 ↗
27. Intergranular corrosion behavior of Inconel 625 deposited by CMT/GTAW10.1016/j.corsci.2022.110295 ↗
28. Waterside corrosion of M5 alloy in lithiated/borated and supercritical water: influences of aqueous environments10.1016/j.supflu.2022.105828 ↗
29. A surface analytical approach to the high temperature chlorination behaviour of Inconel 600 at 700 °C10.1016/S0010-938X(96)00112-6 ↗
30. Compatibility of structural materials with molten chloride mixture at high temperature10.1016/S0022-3115(97)00175-X ↗
31. The role of chlorine in high temperature corrosion in waste-to-energy plants10.1080/09603409.1997.11689546 ↗
32. Cyclic voltammetry for monitoring corrosive impurities in molten chlorides for thermal energy storage10.1016/j.egypro.2017.09.489 ↗
33. Electrochemical method for monitoring corrosive impurities in molten MgCl2/KCl/NaCl salts for thermal energy storage
34. Effect of enamel coating on the hot corrosion of 304 stainless steel beneath KCl–ZnCl2 deposits at 450 °C10.1016/j.jmrt.2022.12.152 ↗
35. A comparative study on the high temperature corrosion of TP347H stainless steel, C22 alloy and laser-cladding C22 coating in molten chloride salts10.1016/j.corsci.2014.03.012 ↗
36. The evolution of crevice corrosion damage on the Ni–Cr–Mo–W alloy-22 determined by confocal laser scanning microscopy10.1016/j.corsci.2011.09.028 ↗
37. Pitting corrosion behaviour of austenitic stainless steels – combining effects of Mn and Mo additions10.1016/j.corsci.2008.04.005 ↗
38. Compatibility of Inconel 617 alloy with LiF-MgF2-KF thermal energy storage salts and vacuum at high temperature10.1007/BF02658258 ↗
39. Sohal · 2010
40. High-temperature corrosion behavior of Inconel 625 alloy in a ternary molten salt of NaCl-CaCl2-MgCl2 in air and N210.1016/j.solener.2022.03.074 ↗
41. Ferrosilite (FeSiO3): synthesis at high pressures and temperatures10.1126/science.144.3614.73 ↗
42. Gas sensing properties of thermally evaporated lamellar MoO310.1016/j.snb.2009.11.007 ↗
43. Magnetically separable γ-Fe2O3 nanoparticles: an efficient catalyst for acylation of alcohols, phenols, and amines using sonication energy under solvent free condition10.1016/j.molcata.2015.04.002 ↗
44. Post-sputtering heat treatments of molybdenum on silicon wafer10.3390/app8091692 ↗