journal article·2024-01Open access

Nanocrystalline alternative rare earth-iron-boron permanent magnets without Nd, Pr, Tb and Dy: A review

Jiayi He, Bang Zhou, Xuefeng Liao, Zhongwu Liu

Abstract

The continuous increase in the output of Nd-Fe-B permanent magnets leads to the increasing consumption of rare earth (RE) metals of Nd, Pr, Tb and Dy. As a result, a serious unbalanced utilization of RE resource occurs. To reduce the use of these critical REs, high abundance REs of Y, La, Ce and even Gd and Ho have been proposed to partly substitute Pr and Nd in sintered magnets and rapid-quenched nanocrystalline magnetic powders. Recently, the cost-effective RE-Fe-B magnets without Nd, Pr, Tb and Dy have also been developed. This type of magnet is preliminarily designed to bridge the magnetic properties gap between hard ferrites and bonded Nd-Fe-B magnets, which shows the potential applications in voice coil motor, spindle motors and magnetic resonance imaging systems. This review summarizes the progress of RE-Fe-B-type magnets containing no Nd, Pr, Dy and Tb based on the world-wide investigations and our recent findings. The fundamentals of intrinsic magnetic properties of Y, La, Ce based RE2Fe14B phases are introduced first. The relationship between magnetic properties and microstructure of rapidly quenched and bulk RE-Fe-B magnets with nanocrystalline structure is then emphatically discussed. Hard magnetic properties and performance/cost ratio of various RE-Fe-B alloy systems are summarized and compared. Furthermore, the current discoveries and the existing challenges are discussed. Some potential strategies for the future research in this field are finally proposed.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Magnetic Properties of Alloys · Magnetic properties of thin films · Magnetic Properties and Applications

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (100+)

Show source-provided references
1. Magnetic materials and devices for the 21st century: stronger, lighter, and more energy efficient10.1002/adma.201002180 ↗
2. Prospect for HRE-free high coercivity Nd-Fe-B permanent magnets10.1016/j.scriptamat.2018.03.012 ↗
3. Significant progress of grain boundary diffusion process for cost-effective rare earth permanent magnets: a review10.1016/j.matdes.2021.110004 ↗
4. Development of non-rare earth grain boundary modification techniques for Nd-Fe-B permanent magnets10.1016/j.jmst.2021.05.012 ↗
5. Perspective and prospects for rare earth permanent magnets10.1016/j.eng.2018.11.034 ↗
6. Current progress and future challenges in rare-earth-free permanent magnets10.1016/j.actamat.2018.07.049 ↗
7. Gan · 2020
8. Grain boundary restructuring and La/Ce/Y application in Nd-Fe-B magnets10.1088/1674-1056/28/7/077507 ↗
9. Textured (Ce,La,Y)-Fe-B permanent magnets by hot deformation10.1016/j.jmrt.2022.01.106 ↗
10. R2Fe14B materials: intrinsic properties and technological aspects10.1103/RevModPhys.63.819 ↗
11. Shanghai Metals Market, Pricing of Rare Earth Metals. https://www.metal.com/Rare- Earth-Metals. (Accessed 20 November 2023).
12. Influence of Ce content on the rectangularity of demagnetization curves and magnetic properties of Re-Fe-B magnets sintered by double main phase alloy method10.1109/TMAG.2013.2278018 ↗
13. Attaining high magnetic performance in as-sintered multi-main-phase Nd-La-Ce-Fe-B magnets: toward skipping the post-sinter annealing treatment10.1016/j.actamat.2019.03.005 ↗
14. Balancing the microstructure and chemical heterogeneity of multi-main-phase Nd-Ce-La-Fe-B sintered magnets by tailoring the liquid-phase-sintering10.1016/j.matdes.2019.108308 ↗
15. Influences of element segregation on the magnetic properties in nanocrystalline Nd-Ce-Fe-B alloys10.1016/j.matchar.2018.12.022 ↗
16. Tb-Cu grain boundary diffusion effects on single-and multi-main-phase Nd–Fe–B based magnets10.1039/D2TC03090J ↗
17. Magnetic properties and rare earth element diffusion behavior of hot-deformed nanocrystalline dual-main-phase Nd-Ce-Fe-B magnets10.1039/D2RA08291H ↗
18. Tuning Ce distribution for high performance Nd-Ce-Fe-B sintered magnets10.1016/j.jmmm.2016.06.048 ↗
19. Improved thermal stability of Nd-Ce-Fe-B sintered magnets by Y substitution10.1016/j.scriptamat.2016.12.013 ↗
20. Uniform magnetization reversal in dual main-phase (Ce,Nd)2Fe14B sintered magnets with inhomogeneous microstructure
21. Magnetic performance change of multi-main-phase Nd-Ce-Fe-B magnets by diffusing (Nd, Pr)Hx10.1088/1361-6463/aaa205 ↗
22. Effects of REFe2 on microstructure and magnetic properties of Nd-Ce-Fe-B sintered magnets10.1016/j.actamat.2017.02.002 ↗
23. An enhanced coercivity for (CeNdPr)–Fe–B sintered magnet prepared by structure design
24. Crucial role of the REFe2 intergranular phase on corrosion resistance of Nd-La-Ce-Fe-B sintered magnets10.1016/j.jallcom.2017.11.372 ↗
25. Comparison on the coercivity enhancement of sintered NdFeB magnets by grain boundary diffusion with low-melting (Tb, R)75Cu25 alloys (R= None, Y, La, and Ce)10.1063/1.5129897 ↗
26. Grain boundary diffusion treatment of sintered NdFeB magnets by low cost La-Al-Cu alloys with various Al/Cu ratios10.1016/j.jmmm.2019.165498 ↗
27. Clarifying the effects of La and Ce in the grain boundary diffusion sources on sintered NdFeB magnets10.1088/2053-1591/ab3756 ↗
28. Coercivity enhancement of thicker sintered NdFeB magnets by grain boundary diffusion with low-melting Tb75-xCexCu25 (x=0-45) alloys10.1016/j.jmmm.2020.167287 ↗
29. Towards the diffusion source cost reduction for NdFeB grain boundary diffusion process10.1016/j.jmst.2019.08.009 ↗
30. Understanding the role of element grain boundary diffusion mechanism in Nd–Fe–B magnets
31. Nd2Fe14B permanent magnets substituted with non-critical light rare earth elements (Ce, La): a review10.1016/j.jmmm.2023.170768 ↗
32. Reducing Dy content by Y substitution in nanocomposite NdFeB alloys with enhanced magnetic properties and thermal stability10.1109/TMAG.2012.2202217 ↗
33. Hard magnetic materials: a perspective10.1109/TMAG.2011.2166975 ↗
34. Magnetic properties of ternary rare-earth compounds of the type R2Fe14B10.1016/0304-8853(84)90261-0 ↗
35. Cerium: an unlikely replacement of dysprosium in high performance Nd-Fe-B permanent magnets10.1002/adma.201404892 ↗
36. Magnetic anisotropy—how much is enough for a permanent magnet?10.1016/j.scriptamat.2015.09.021 ↗
37. Magnetization and magnetic anisotropy of R2Fe14B measured on single crystals10.1063/1.336611 ↗
38. Permanent magnet materials based on the rare earth-iron-boron tetragonal compounds10.1109/TMAG.1984.1063214 ↗
39. Permanent magnets based on R-Fe-B and R-Fe-C alloys10.1088/0034-4885/61/9/001 ↗
40. Magnetic properties and phase constitution of rapidly quenched nanocrystalline Gd-Fe-B alloys with various Gd contents10.1016/j.matlet.2022.132130 ↗
41. Phase precipitation and magnetic properties of melt-spun ternary Gd2Fe14B alloy and advantages of gadolinium substitution in Y2Fe14B alloy10.1016/j.jre.2022.04.001 ↗
42. Grain boundary diffusion of different rare earth elements in Nd-Fe-B sintered magnets by experiment and FEM simulation10.1016/j.actamat.2016.11.034 ↗
43. Harris · 1987
44. Magnetism in gallium-dopedCeFe2: martensitic scenario10.1103/PhysRevB.78.144429 ↗
45. Cu-mediated grain boundary engineering in Nd–Ce–Fe–B nanostructured permanent magnets
46. The effects of forming CeFe2 on phase structure and magnetic properties in Ce-rich Nd-Ce-Fe-B permanent magnetic materials10.3390/ma14206070 ↗
47. Coercivity enhancement of hot-deformed Ce-Fe-B magnets by grain boundary infiltration of Nd-Cu eutectic alloy10.1016/j.actamat.2017.10.071 ↗
48. Phase constitution and microstructure of Ce-Fe-B strip-casting alloy10.1088/1674-1056/23/10/107501 ↗
49. Post-annealing effects on the microstructure and magnetic properties of hot-deformed Nd-Fe-B magnets10.1109/TMAG.2022.3140858 ↗
50. High-efficiency utilization of Tb in enhancing the coercivity of Nd-Fe-B magnets by multicomponent Tb70−xPrxCu10Al10Zn10 (x = 0-30) film diffusion10.1016/j.jallcom.2022.163619 ↗
51. 57Fe Mössbauer spectrometry: a powerful technique to analyze the magnetic and phase characteristics in RE–Fe–B permanent magnets
52. Understanding the phase structure, magnetic properties and anti-corrosion behavior of melt-spun (La,Y)2Fe14B alloys10.1016/j.jmmm.2019.165444 ↗
53. Magnetic properties of the intermetallic compounds RFe210.1051/jphyscol:19711234 ↗
54. Detailed study of NdFe2 and additional results relative to PrFe2 and YbFe2. Comparison with other REFe2 compounds
55. Rapidly quenched heavy rare earth-based ternary Lu-Fe-B alloys: phase evolution and hard magnetic properties
56. Magnetic hardening of Ce2Fe14B10.1063/1.3675175 ↗
57. Hard magnetic properties of melt-spun nanocomposite Y16Fe78B6 ribbons10.1007/s12598-016-0750-3 ↗
58. Phase precipitation behavior of melt-spun ternary Ce2Fe14B alloy during rapid quenching and heat treatment10.1016/j.jmmm.2017.06.028 ↗
59. Magnetocrystalline anisotropy of R2Fe14B tetragonal compounds10.1063/1.95015 ↗
60. New material for permanent magnets on a base of Nd and Fe (invited)10.1063/1.333572 ↗
61. Formation of Fe14La2B phase in as‐cast and melt‐spun samples10.1063/1.96029 ↗
62. Intergranular exchange interaction in nanocrystalline hard magnetic rare earth–iron–boron-based melt-spun alloy ribbons10.1088/0022-3727/42/14/145006 ↗
63. Grain boundary oxide layers in NdFeB-based permanent magnets10.1016/j.matdes.2020.109417 ↗
64. Observation of pseudopartial grain boundary wetting in the NdFeB-based alloy10.1007/s11665-015-1872-8 ↗
65. Fundamental properties of melt-spun stoichiometric Y2Fe14B alloy and the advantages of Nd substitution
66. Grain boundary engineering towards high-figure-of-merit Nd-Ce-Fe-B sintered magnets: synergetic effects of (Nd, Pr)Hx and Cu co-dopants10.1016/j.actamat.2020.116529 ↗
67. Phase precipitation and properties of melt-spun Ho-Fe-B alloys prepared by direct quenching and over-quenching followed by heat treatment10.1016/j.intermet.2022.107688 ↗
68. Domain structure transformation and magnetic susceptibility of Ho2Fe17 single crystals10.1016/j.jallcom.2016.08.041 ↗
69. Maximizing the hard magnetic properties of melt-spun Ce–La–Fe–B alloys10.1007/s10853-019-03387-x ↗
70. Hard magnetic properties of rapidly quenched (La,Ce)-Fe-B ribbons10.1109/TJMJ.1985.4549050 ↗
71. Origin of low coercivity of high La–Ce-containing Nd–Fe–B sintered magnets10.1007/s12598-020-01556-5 ↗
72. Exceptional elevated temperature behavior of nanocrystalline stoichiometric Y2Fe14B alloys with La or Ce substitutions10.1007/s10853-019-03916-8 ↗
73. Tuning the hard magnetic properties of nanocrystalline Ce-Fe-B alloys by Ho substitution10.1016/j.matlet.2022.132569 ↗
74. Development of cost-effective nanocrystalline multi-component (Ce,La,Y)-Fe-B permanent magnetic alloys containing no critical rare earth elements of Dy, Tb, Pr and Nd10.1016/j.jmst.2020.11.027 ↗
75. Evolution of core-shell structure induced by Yttrium in Nd-LaCe-Fe-B multi-main-phase magnets10.1016/j.jallcom.2021.163127 ↗
76. Chemically inhomogeneous RE-Fe-B permanent magnets with high figure of merit: solution to global rare earth criticality
77. High performance (La, Ce, Pr, Nd)-Fe-B die-upset magnets based on misch-metal10.1016/j.jallcom.2017.06.290 ↗
78. Performance improvement and element segregation behavior in Y substituted nanocrystalline (La,Ce)–Fe–B permanent magnetic alloys without critical RE elements10.1016/j.jallcom.2020.155226 ↗
79. The partitioning of La and Y in Nd–Fe–B magnets: a first-principles study10.1016/j.jallcom.2012.10.056 ↗
80. Enhancement in hard magnetic properties of nanocrystalline (Ce,Y)-Fe-Si-B alloys due to microstructure evolution caused by chemical heterogeneity10.1039/D0TC03011B ↗
81. Magnetic properties, phase transition temperatures and microstructure of CeFeB-alnico ribbons10.1016/j.jmmm.2019.165252 ↗
82. Improving the hard magnetic properties by intragrain pinning for Ta doped nanocrystalline Ce-Fe-B alloys10.1016/j.jmst.2019.05.007 ↗
83. The effect of the Mo addition on the magnetic properties and phase constituents of the Ce-(FeCo)–B ribbons10.1016/j.intermet.2021.107425 ↗
84. Suppressing the CeFe2 phase formation and improving the coercivity and thermal stability of Ce-Fe-B alloys by Si substitution10.1016/j.intermet.2019.01.013 ↗
85. Effect of Ga addition on the valence state of Ce and magnetic properties of melt-spun Ce17Fe78-xB6Gax (x = 0-1.0) ribbons10.1063/1.5000703 ↗
86. Phase constituents, magnetic properties, intergranular exchange interactions and transition temperatures of Ge-doped CeFeB alloys10.1016/j.jpcs.2019.04.033 ↗
87. Optimized composition and improved magnetic properties of Ce-Fe-B alloys10.1016/j.jallcom.2019.151998 ↗
88. Magnetic properties and microstructure of melt-spun Ce17Fe78−xB6Hfx (x = 0–1.0) alloys10.1016/j.jmmm.2017.08.068 ↗
89. Clarifying the basic phase structure and magnetic behavior of directly quenched (Ce,La)2Fe14B alloys with various Ce/La ratios10.1016/j.cap.2019.04.002 ↗
90. Variations of phase constitution and magnetic properties with Ce content in Ce-Fe-B permanent magnets10.1016/j.matlet.2016.02.149 ↗
91. Crystal structure and magnetic properties of Ce2Fe14-xCoxB alloys10.1016/j.jallcom.2013.05.101 ↗
92. Microstructure and magnetic properties of Ce10+xFe84−xB6 nanocrystalline ribbons versus preparation conditions10.1016/j.jmmm.2017.01.062 ↗
93. Magnetic properties and microstructure of melt-spun Ce–Fe–B magnets10.1109/TMAG.2015.2447553 ↗
94. Structure, magnetic properties and Mössbauer study of melt-spun nanocrystalline Ce-rich ternary Ce-Fe-B alloy10.1016/j.jallcom.2017.04.320 ↗
95. A cost-effective approach to optimizing microstructure and magnetic properties in Ce17Fe78B6 alloys10.3390/ma10080869 ↗
96. Study on magnetic properties of Ce17Fe78-xZrxB6 (x =0–2.0) alloys10.1016/j.jmmm.2015.10.110 ↗
97. Intrinsic magnetic properties of Ce2Fe14B modified by Al, Ni, or Si10.3390/app8020205 ↗
98. Phase precipitation behavior of rapidly quenched ternary La-Fe-B alloy and the effects of Nd substitution10.1088/2053-1591/aa7d85 ↗
99. Experimental and computational study on the phase formation and magnetic properties of Ce-La-Fe-B alloys10.1016/j.jmmm.2018.04.058 ↗
100. Enhanced magnetic properties of spark plasma sintered (La/Ce)–Fe–B magnets