journal article·2024-01Open access

Design and microstructure-mechanical properties of a novel metastable β titanium alloy with excellent strength-plasticity matching

Jinguang Li, Keren Zhang, Rui Hu, Jieren Yang

Abstract

Based on the d-electron theory, a new type of high strength metastable β alloy Ti-5.2Mo-5.2Cr-4.0Al-4.4V-2.4Nb (Ti-542) alloy was developed which presented excellent strength-plasticity matching. In solution state, the yield strength can reach 871 MPa, where the fracture elongation is as high as 23.6 %. The twining and martensitic transformation have been founded which contributes to achieve a superhigh plasticity. After aging treatment, the yield strength of Ti-542 can increase to 1256 MPa and the fracture elongation is still reach 8.7 % which is obviously better than other commercial alloys at the same strength level. The multiple twins of αW produced during deformation are expected to improve the synergistic deformation ability of micro-zone and enhance the plasticity of the alloy. The strengthening mechanism was also thoroughly discussed based on microstructures and strengthening models. This work provides a valuable choice for structural materials on new generation of aviation equipment.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Titanium Alloys Microstructure and Properties · Intermetallics and Advanced Alloy Properties · Additive Manufacturing Materials and Processes

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (39)

Show source-provided references
1. Deformation mechanism and microstructure control of high strength metastable β titanium alloy
2. Hybrid additive manufacturing of an electron beam powder bed fused Ti6Al4V by transient liquid phase bonding10.1016/j.jmrt.2022.07.009 ↗
3. Tensile deformation and fracture of Ti-5Al-5V-5Mo-3Cr-1.5Zr-0.5Fe alloy at room temperature10.1016/j.msea.2013.08.055 ↗
4. Study of the hot deformation behaviour in Ti-5Al-5Mo-5V-3Cr-1Zr10.1016/j.msea.2011.07.068 ↗
5. Plastic deformation via hierarchical nano-sized martensitic twinning in the metastable β Ti-24Nb-4Zr-8Sn alloy10.1016/j.actamat.2020.04.021 ↗
6. In-situ microstructural investigations of the TRIP-to-TWIP evolution in Ti-Mo-Zr alloys as a function of Zr concentration10.1016/j.jmst.2020.04.078 ↗
7. Microstructures and mechanical properties of metastable Ti-30Zr-(Cr, Mo) alloys with changeable Young's modulus for spinal fixation applications10.1016/j.actbio.2011.04.019 ↗
8. Hierarchical structure and deformation behavior of a novel multicomponent β titanium alloy with ultrahigh strength10.1016/j.jmst.2021.08.031 ↗
9. A semi-empirical approach to the prediction of deformation behaviors of β-Ti alloys10.1016/j.scriptamat.2018.08.035 ↗
10. A new multi-element beta titanium alloy with a high yield strength exhibiting transformation and twinning induced plasticity effects10.1016/j.scriptamat.2017.10.017 ↗
11. New high strength and high toughness titanium alloy with 1200 MPa
12. Microstructure tailoring and impact toughness of a newly developed high strength Ti-5Al-3Mo-3V-2Cr-2Zr-1Nb-1Fe alloy10.1016/j.matchar.2021.111103 ↗
13. A novel TWIP/TRIP near-α Ti alloy with multi-scale α-phase: the superior combination of strength and fracture toughness10.1016/j.jmrt.2023.07.247 ↗
14. A β-titanium alloy with extra high strain-hardening rate: design and mechanical properties10.1016/j.scriptamat.2015.11.020 ↗
15. Beta titanium alloys
16. Composition design of beta-titanium alloys: theoretical. methodological and practical advances
17. Activation of homogeneous precursors for formation of uniform and refined α precipitates in a high-strength β-Ti alloy10.1016/j.mtla.2019.100557 ↗
18. Influence of phase transformation kinetics on the formation of α in a β-quenched Ti-5Al-5Mo-5V-3Cr-1Zr alloy10.1016/j.actamat.2015.05.008 ↗
19. The origin of striation in the metastable β phase of titanium alloys observed by transmission electron microscopy10.1107/S1600576717004150 ↗
20. Building a continuous cooling transformation diagram of β -CEZ alloy by metallography and electrical resistivity measurements10.1007/s11661-997-0004-y ↗
21. Microstructural formation in Ti alloys: in-situ characterization of phase transformation kinetics10.1007/s11837-007-0011-x ↗
22. Impact of texture on mechanical properties in an advanced titanium alloy10.1016/S0921-5093(00)02034-7 ↗
23. Variant selection by dislocations during α precipitation in α/β titanium alloys10.1016/j.actamat.2014.12.044 ↗
24. Tensile and fracture toughness of high strength b Titanium alloy, Ti-10V-2Fe-3Al as a function of rolling and solution treatment temperatures10.1016/j.matdes.2012.11.053 ↗
25. Achieving super-high strength and acceptable plasticity for a near β-type Ti-4.5Mo-5.1Al-1.8Zr-1.1Sn-2.5Cr-2.9Zn alloy through manipulating hierarchical microstructure10.1016/j.msea.2021.141907 ↗
26. On the mechanism of {332} twinning in metastable beta titanium alloys10.1016/j.actamat.2016.03.040 ↗
27. Super-high-strength graphene/titanium composites fabricated by selective laser melting10.1016/j.carbon.2020.12.047 ↗
28. Precipitation strengthening at ambient and elevated temperatures of heat-treatable Al(Sc) alloys10.1016/S1359-6454(02)00201-X ↗
29. The effect of grain size on the deformation of niobium10.1016/0025-5416(70)90015-7 ↗
30. Six decades of the Hall–Petch effect-a survey of grain-size strengthening studies on pure metals10.1080/09506608.2016.1191808 ↗
31. Multi-component solid solution hardening10.1007/BF00540988 ↗
32. Modelling solid solution hardening in high entropy alloys10.1016/j.actamat.2014.11.014 ↗
33. Grain-boundary strengthening in nanocrystalline chromium and the Hall–Petch coefficient of body-centered cubic metals10.1016/j.scriptamat.2012.09.025 ↗
34. Strengthening mechanisms in equiatomic ultrafine grained AlCoCrCuFeNi high-entropy alloy studied by micro- and nanoindentation methods10.1016/j.actamat.2016.11.046 ↗
35. Zhao · 2020 · 54
36. Unusual activated processes controlling dislocation motion in body-centered-cubic high-entropy alloys10.1073/pnas.1919136117 ↗
37. Atomistic simulations of dislocations in a model BCC multicomponent concentrated solid solution alloy10.1016/j.actamat.2016.12.011 ↗
38. Courtney · 2005 · 1
39. X-ray diffraction analysis of nanocomposite Fe3O4/activated carbon by Williamson–Hall and size-strain plot methods10.1016/j.nanoso.2019.100396 ↗