Aluminum matrix composites: Structural design and microstructure evolution in the deformation process
Source abstract
Abstract
In recent years, there has been tremendous growth in the use of Al matrix composites (AMCs) in various engineering applications. The aerospace and automotive industries are using more and more AMC parts. It has been widely recognized that the comprehensive properties of AMCs are significantly affected and determined by the structural design and the evolution of the microstructure of AMCs in the deformation process. Based on the current research status of the design of AMC structure and the evolution of microstructure, this paper presents a panorama of the design of the structure and the evolution of microstructure with respect to the reinforcements, the interface between Al matrix and reinforcements, and the Al matrix in AMCs, respectively. The overall properties or performance of AMCs are examined in this review, which emphasizes their advantages and limitations as compared to their traditional or unreinforced counterparts. The experimental and theoretical analysis and prediction to aid the design of the spatial distribution of reinforcements and the optimization of structural parameters, as well as the study of the evolution of microstructures, are critically analyzed, discussed, and elucidated. Finally, the research gap, the key challenges in research and the promising application potentials in future are also discussed and articulated.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Aluminum Alloys Composites Properties · Aluminum Alloy Microstructure Properties · Advanced Welding Techniques Analysis
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (100+)
Show source-provided references
1. TiAlN/VN superlattice structured PVD coatings: a new alternative in machining of aluminium alloys for aerospace and automotive components10.1016/j.surfcoat.2005.11.106 ↗
2. Recent development in aluminium alloys for the automotive industry10.1016/S0921-5093(99)00653-X ↗
3. The effects of aging on machinability of 6061 aluminium alloy10.1016/j.matdes.2008.08.007 ↗
4. Machining of aluminum alloys: a review10.1007/s00170-016-8431-9 ↗
5. Microstructure evolution and flow behavior of hot-rolled aluminum – 5% B4C composite10.1016/j.matdes.2013.07.025 ↗
6. Microstructure and mechanical properties of A356 alloy with yttrium addition processed by hot extrusion10.1016/j.jre.2018.11.008 ↗
7. A novel Al–Ti–B alloy for grain refining Al–Si foundry alloys10.1016/j.jallcom.2009.07.064 ↗
8. Isothermal forging of AA2618 reinforced with 20% of alumina particles10.1016/j.compositesa.2004.02.014 ↗
9. Additive manufacturing of an aluminum matrix composite reinforced with nanocrystalline high-entropy alloy particles10.1016/j.msea.2016.10.038 ↗
10. Microstructural evolution, mechanical profile, and fracture morphology of aluminum matrix composites containing graphene nanoplatelets10.1557/jmr.2017.111 ↗
11. Aging behavior of 6061Al matrix composite reinforced with high content SiC nanowires10.1016/j.jallcom.2015.07.233 ↗
12. Recent progress in the development and properties of novel metal matrix nanocomposites reinforced with carbon nanotubes and graphene nanosheets10.1016/j.mser.2013.08.001 ↗
13. Damping characteristics of carbon nanotube reinforced aluminum composite10.1016/j.matlet.2006.11.073 ↗
14. Reinforcement with in-situ synthesized carbon nano-onions in aluminum composites fabricated by flake powder metallurgy10.1016/j.jallcom.2015.07.294 ↗
15. Tuning the microstructure features of in-situ nano TiB2/Al-Cu-Mg composites to enhance mechanical properties10.1016/j.jallcom.2018.10.078 ↗
16. Application of hybrid aluminum matrix composite in automotive industry10.1016/j.matpr.2019.07.195 ↗
17. Aluminum matrix composites for industrial use: advances and trends10.1016/j.promfg.2016.12.045 ↗
18. A review on mechanical and tribological behaviors of stir cast aluminum matrix composites10.1016/j.mspro.2014.07.229 ↗
19. Characterization of hybrid aluminum matrix composites for advanced applications–A review10.1016/j.jmrt.2015.05.004 ↗
20. Particle reinforced aluminium and magnesium matrix composites10.1179/imr.1994.39.1.1 ↗
21. Microstructural and mechanical characteristics of in situ metal matrix composites10.1016/S0927-796X(00)00024-3 ↗
22. Characterization of properties of cryogenically treated Al–SiC composites fabricated by powder metallurgy10.1080/10426910500471680 ↗
23. Identification of σ and Ω phases in AA2009/SiC composites10.1016/j.jallcom.2009.03.154 ↗
24. Effect of reinforcement geometry on precipitation kinetics of powder metallurgy AA2009/SiC composites10.1016/j.jallcom.2008.12.114 ↗
25. Mechanical properties of rolled A356 based composites reinforced by Cu-coated bimodal ceramic particles10.1016/j.matdes.2015.06.027 ↗
26. Improving the high-cycle fatigue strength of heterogeneous carbon nanotube/Al-Cu-Mg composites through grain size design in ductile-zones10.1016/j.compositesb.2021.109094 ↗
27. Mechanical properties of Al-SiC composites made by resistance sintering of mechanically alloyed powders10.1016/0921-5093(91)90821-4 ↗
28. Strengthening behavior of particulate reinforced MMCs10.1016/0956-716X(92)90108-Q ↗
29. The effects of SiCp clusters and porosity on the mechanical properties of PM Al matrix composites
30. Isothermal forging of metal matrix composites: recrystallization behaviour by means of deformation efficiency10.1016/j.compscitech.2005.04.047 ↗
31. Mechanical and fracture behaviour of aluminium-based discontinuously reinforced composites at hot working temperatures10.1016/j.compscitech.2005.04.045 ↗
32. Flow curve prediction of an Al-MMC under hot working conditions using neural networks10.1016/j.commatsci.2006.05.002 ↗
33. Some experimental data on workability of aluminium-particulate-reinforced metal matrix composites10.1016/j.jmatprotec.2007.07.047 ↗
34. Effect of particle surface treatment on the microstructure and property of SiCp/AA6066 composite produced by powder metallurgy10.1016/j.msea.2009.04.005 ↗
35. Forging of the AA2618/20 vol.% Al2O3p composite: effects on microstructure and tensile properties10.1016/j.compscitech.2008.08.027 ↗
36. Microstructurally inhomogeneous composites: is a homogeneous reinforcement distribution optimal?10.1016/j.pmatsci.2015.01.002 ↗
37. Regulation of interface between carbon nanotubes-aluminum and its strengthening effect in CNTs reinforced aluminum matrix nanocomposites10.1016/j.carbon.2019.09.016 ↗
38. Interface characteristics and mechanical properties of short carbon fibers/Al composites with different coatings10.1016/j.apsusc.2008.10.124 ↗
39. Improving the mechanical properties of carbon nanotubes reinforced pure aluminum matrix composites by achieving non-equilibrium interface10.1016/j.matdes.2017.01.096 ↗
40. A comprehensive analysis of extrusion behavior, microstructural evolution, and mechanical properties of 6063 Al–B4C composites produced by semisolid stir casting10.1016/j.msea.2018.02.080 ↗
41. Microstructure and corrosion behavior of Al-TiB2/TiC composites processed by hot rolling10.1016/j.rinp.2019.102471 ↗
42. Research on hot deformation behaviors of discontinuously reinforced aluminum composites
43. Selective laser melting of advanced Al-Al2O3 nanocomposites: simulation, microstructure and mechanical properties10.1016/j.msea.2017.05.061 ↗
44. Friction stir processing of copper-coated SiC particulate-reinforced aluminum matrix composite10.3390/ma11040599 ↗
45. Effect of reinforcement volume fraction on the evolution of reinforcement size during the extrusion of Al-SiC composites10.1016/S0921-5093(01)01526-X ↗
46. A study of the microstructure, texture and tensile properties of 1060/Al-TiC/1060 sandwich composites prepared by hot-roll bonding10.1007/s11661-020-06044-0 ↗
47. A flake powder metallurgy approach to Al2O3/Al biomimetic nanolaminated composites with enhanced ductility10.1016/j.scriptamat.2011.05.022 ↗
48. Effect of Ti addition on interfacial properties of Al (111)/B4C (0001): a combined experimental and theoretical methods10.1016/j.mssp.2022.106707 ↗
49. Failure mechanisms in SiC-fiber reinforced 6061 aluminum alloy composites under monotonic and cyclic loading10.1007/BF02656640 ↗
50. Analysis of microfracture behavior of P/M 2009 Al-SiC composites10.4028/www.scientific.net/KEM.104-107.655 ↗
51. Effect of interfacial modifying on the microstructures, mechanical properties and abrasive wear properties of aluminum borate whiskers reinforced 6061Al composite10.1016/j.jallcom.2016.09.082 ↗
52. Strengthening behavior in SiC nanowires reinforced pure Al composite10.1016/j.jallcom.2016.11.134 ↗
53. The tensile response and fracture behavior of 2009 aluminum alloy metal matrix composite10.1016/S0921-5093(02)00481-1 ↗
54. Aeronautical applications of metal-matrix composites
55. Microstructural and tribological characteristics of AA6351/Si3N4 composites manufactured by stir casting10.1016/j.jmrt.2020.09.128 ↗
56. The use of cryogenic milling to prepare high performance Al2009 matrix composites with dispersive carbon nanotubes10.1016/j.matdes.2016.11.008 ↗
57. Effect of graphene nanoplatelets addition on mechanical properties of pure aluminum using a semi-powder method10.1016/j.pnsc.2014.03.012 ↗
58. Fabrication and mechanical properties of bulk NiTip/Al composites prepared by friction stir processing10.1016/j.jallcom.2013.10.013 ↗
59. Effect of friction stir welding on microstructure, tensile and fatigue properties of the AA7005/10 vol.% Al2O3p composite10.1016/j.compscitech.2006.07.029 ↗
60. The effect of matrix to reinforcement particle size ratio (PSR) on the microstructure and mechanical properties of a P/M processed AlCuMn/SiCp MMC10.1016/j.msea.2004.04.040 ↗
61. Strengthening mechanism in graphene nanoplatelets reinforced aluminum composite fabricated through spark plasma sintering10.1016/j.msea.2017.04.009 ↗
62. An approach for homogeneous carbon nanotube dispersion in Al matrix composites10.1016/j.matdes.2015.02.003 ↗
63. Strengthening mechanisms in carbon nanotube-reinforced aluminum composites10.1016/j.carbon.2015.08.112 ↗
64. Vanadium carbide reinforced aluminum matrix composite prepared by conventional, microwave and spark plasma sintering10.1016/j.jallcom.2016.07.063 ↗
65. Structure and properties of modified compocast microsilica reinforced aluminum matrix composite10.1016/j.matdes.2015.08.110 ↗
66. Microstructure and mechanical properties of the ultra-fine grained ZK60 reinforced with low content of nano-diamond by powder metallurgy10.1016/j.jallcom.2018.11.110 ↗
67. Friction stir processing of high-entropy alloy reinforced aluminum matrix composites for mechanical properties enhancement10.1016/j.msea.2020.139755 ↗
68. A novel comparative study based on the economic feasibility of the ceramic nanoparticles role's in improving the properties of the AA5250 nanocomposites10.3390/coatings11080977 ↗
69. Strengthening and fracture behaviors in SiCp/Al composites with network particle distribution architecture10.1016/j.msea.2018.10.105 ↗
70. Coupling effects of matrix and interface on synergetic deformation behaviors of Cu/Al composite plates10.1088/2053-1591/ab5c2f ↗
71. Preliminary investigations on the Mg–Al–Zn/Al laminated composite fabricated by equal channel angular extrusion10.1016/j.jmatprotec.2008.11.034 ↗
72. Preparation of Ti/Al composite plates by differential temperature rolling with induction heating10.1007/s00170-021-07775-z ↗
73. Experimental and numerical characterization of flexural properties and failure behavior of CFRP/Al laminates10.1016/j.compstruct.2021.115036 ↗
74. Cold roll bonding of multi-layered bi-metal laminate composites10.1016/j.compscitech.2009.03.018 ↗
75. Influence of mesostructure on mechanical property of laminated Ti–Al composites10.1002/adem.201700070 ↗
76. Microstructure and mechanical properties of Ti/Al/Ti laminated composites prepared by hot rolling10.1007/s11665-017-2769-5 ↗
77. Laminated nanostructure composites with improved bend ductility and toughness10.1016/j.scriptamat.2009.08.034 ↗
78. Laminated particulate-reinforced aluminum composites with improved toughness10.1016/S1359-6454(00)00332-3 ↗
79. Configuration design and fabrication of laminated titanium matrix composites10.1016/j.matdes.2016.03.061 ↗
80. Architectured lightweight steel composite: evaluation of the effect of geometrical parameters and annealing treatments on deformation behavior10.1016/j.jmrt.2021.10.121 ↗
81. Novel MMC microstructure with tailored distribution of the reinforcing phase10.1046/j.1365-2818.2001.00780.x ↗
82. Toughening of aluminum matrix nanocomposites via spatial arrays of boron carbide spherical nanoparticles10.1016/j.actamat.2015.09.057 ↗
83. Room temperature tensile fracture characteristics of in situ TiBw/Ti6Al4V composites with a quasi-continuous network architecture10.1016/j.scriptamat.2011.01.011 ↗
84. In situ (Al3Zr+ Al2O3np)/2024Al metal matrix composite with novel reinforcement distributions fabricated by reaction hot pressing10.1016/j.jallcom.2013.06.143 ↗
85. The improved strength and ductility of ZrCp/2024Al composites with a quasi-network microstructure fabricated by spark plasma sintering and T6 heat treatment
86. The theory of molecular attractive forces between solids
87. High-temperature mechanical properties of 2024 Al matrix nanocomposite reinforced by TiC network architecture10.1016/j.msea.2019.138121 ↗
88. Strength and fracture toughness of aluminum/alumina composites with interpenetrating networks10.1016/0921-5093(94)09771-2 ↗
89. Wear properties of alumina/aluminum composites with interpenetrating networks10.1111/j.1151-2916.1996.tb07889.x ↗
90. Effect of reinforcement connectivity on the elasto-plastic behavior of aluminum composites containing sub-micron alumina particles10.1016/S1359-6454(03)00431-2 ↗
91. Al–Al2O3 composites with interpenetrating network structures: composite modulus estimation10.1111/j.1551-2916.2005.00115.x ↗
92. Study on the load partition behaviors of high particle content B4C/Al composites in compression10.1177/0021998312472220 ↗
93. Indentation size effects in crystalline materials: a law for strain gradient plasticity10.1016/S0022-5096(97)00086-0 ↗
94. Size dependent strengthening in particle reinforced aluminium10.1016/S1359-6454(01)00327-5 ↗
95. Effects of particle size, particle/matrix interface adhesion and particle loading on mechanical properties of particulate–polymer composites10.1016/j.compositesb.2008.01.002 ↗
96. Interpenetrating microstructure and properties of Si3N4/Al–Mg composites fabricated by pressureless infiltration10.1007/s10443-006-9015-x ↗
97. High efficiency dispersal and strengthening of graphene reinforced aluminum alloy composites fabricated by powder metallurgy combined with friction stir processing10.1016/j.carbon.2018.04.029 ↗
98. Review on superior strength and enhanced ductility of metallic nanomaterials10.1016/j.pmatsci.2018.02.002 ↗
99. Effect of addition of multiwalled carbon nanotube/graphite nanoplatelets hybrid on the mechanical properties of aluminium10.1016/j.diamond.2020.107715 ↗
100. Characterization of friction stir processed aluminum-graphene nanoplatelets composites10.4271/05-13-02-0007 ↗