Effects of hot extrusion texture on anisotropy in microstructure and mechanical properties of spray formed Al–Zn–Mg–Cu 7055 aluminum alloy
Source abstract
Abstract
The Al-Zn-Mg-Cu 7055 aluminum alloy was meticulously fabricated through spray forming (SF) technology, followed by hot extrusion and T76 treatment. This comprehensive process allowed for a thorough investigation of its microstructural characteristics, mechanical properties, and fatigue behavior. Post-treatment analysis revealed that the SF-7055 aluminum alloy exhibited no notable segregation or porosity defects, ensuring its exceptional quality and reliability. The microstructural analysis revealed a uniform distribution of refined grains and dispersed precipitates, contributing to the material's strength. Mechanical testing demonstrated that the hot extruded SF-7055 aluminum alloy exhibits superior tensile strength and elongation, with significant anisotropy in mechanical properties favoring the extrusion direction (ED) over the transverse direction (TD). Fatigue testing under varying cyclic stresses revealed an extended fatigue life in the ED-oriented specimens, attributed to the texture-induced resistance to crack initiation and propagation. The study underscores the effectiveness of SF and hot extrusion in enhancing the SF-7055 aluminum alloy's performance, making it a viable candidate for critical aerospace applications. The findings provide valuable insights into the relationship between processing, microstructure, and properties, offering a pathway to the design and fabrication of high-performance aluminum alloys.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Aluminum Alloy Microstructure Properties · Aluminum Alloys Composites Properties · Metallurgy and Material Forming
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (46)
Show source-provided references
1. Analysis of the microhardness, mechanical properties, and electrical conductivity of 7055 aluminum alloy10.1016/j.vacuum.2019.109005 ↗
2. Mechanical properties and thermal stability of 7055 Al alloy by minor Sc addition10.1007/s12598-018-1190-z ↗
3. The mechanism of grain refinement and plasticity enhancement by an improved thermomechanical treatment of 7055 Al alloy10.1016/j.msea.2017.06.106 ↗
4. Optimizing solution heat treatment to improve mechanical properties of al alloy 705510.4028/www.scientific.net/MSF.546-549.877 ↗
5. Consolidation of aerospace grade aluminum 7055 powder through SPS-forge processing10.1080/00084433.2017.1288846 ↗
6. The evolution of plate and extruded products with high strength and fracture toughness
7. Structure-property correlations in Al 7050 and Al 7055 high-strength aluminum alloys10.1016/j.msea.2007.05.116 ↗
8. Effect of lubricating oil and wiper on super-high strength 7055 aluminum alloy ingots10.3390/cryst13010088 ↗
9. The numerical and experimental study on electromagnet-air knife dc casting process of large-size AA 7055 aluminum alloys10.4028/www.scientific.net/MSF.783-786.319 ↗
10. Characterization of spray formed Al-alloys - a Review10.1515/rams-2019-0013 ↗
11. Investigation on metallurgical, tribological, hardness properties of spray deposited and warm rolled Al-18Pb, Al-22Pb alloys10.1016/j.jmrt.2019.09.036 ↗
12. Effect of inter-annealing between two stages of extrusion on the microstructure and mechanical property for spray deposited Al-Cu-Li alloy 219510.1016/j.jmrt.2019.06.052 ↗
13. Spray forming of aluminum alloys and its composites: an overview10.1007/s10853-008-2464-x ↗
14. Microstructure and mechanical properties of 7055 Al alloys by spray forming
15. The effects of aging treatments on mechanical property and corrosion behavior of spray formed 7055 aluminium alloy10.1016/j.jallcom.2017.11.070 ↗
16. Microstructure characteristic of spray formed 7055 Al alloy subjected to ballistic impact by two different steel core projectiles impact10.1016/j.jmrt.2019.10.012 ↗
17. Distribution and evolution of porous defects in spray formed 7 xxx aluminum alloy10.1016/S1875-5372(15)60045-5 ↗
18. Experimental study on densification of spray-formed high-strength aluminum alloy by square cladding forging
19. Effect of processing parameters on the relative density of spray rolling 7050 aluminum alloy strip
20. The combined effect of hot extrusion and heat treatment on the mechanical behavior of 7055 AA processed via spray metal forming10.1016/j.jallcom.2014.07.184 ↗
21. Effects of hot extrusion and heat treatment on microstructure and properties of industrial large-scale spray-deposited 7055 aluminum alloy10.1088/2053-1591/aaa56b ↗
22. Effect of hot extrusion on microstructures and mechanical properties of spray-formed 7055 aluminum alloy
23. Relationship between the fatigue behavior and grain structures of an as-extruded Mg-6.2%Zn-0.6%Zr (in wt.%) alloy10.1016/j.jmst.2022.10.087 ↗
24. Microstructural characteristics and mechanical properties of the hot extruded Mg-Zn-Y-Nd alloys10.1016/j.jmst.2020.05.021 ↗
25. Deformation and fracture mechanisms of an annealing-tailored “bimodal” grain-structured Mg alloy10.1016/j.jmst.2019.06.008 ↗
26. Influence of Cu/Mg ratio on microstructure and mechanical properties of Al–Zn–Mg–Cu alloys10.1007/s10853-020-05438-0 ↗
27. Effect of copper addition on the cluster formation behavior of Al-Mg-Si, Al-Zn-Mg, and Al-Mg-Ge in the natural aging10.1007/s11661-018-4832-8 ↗
28. Reversion and re-aging of a peak aged Al-Zn-Mg-Cu alloy10.1016/j.scriptamat.2020.07.049 ↗
29. Theoretical study on segregation behavior of grain boundaries and precipitated phases in Al-Cu alloys
30. The science and engineering of materials
31. Priester · 2011 · 109
32. Effect of dislocation structure evolution on low-angle grain boundary formation in 7050 aluminum alloy during aging10.1007/s12613-015-1127-6 ↗
33. Precipitation sequence of eta phase along low-angle grain boundaries in Al-Zn-Mg-Cu alloy during artificial aging10.1016/S1003-6326(14)63312-4 ↗
34. Effect of cooling aging on microstructure and mechanical properties of an Al–Zn–Mg–Cu alloy10.1016/j.matdes.2013.12.024 ↗
35. Dynamic evolution of the metastable structure and nano-precipitation of 7055 aluminum alloy under thermal deformation10.3139/146.111667 ↗
36. Effect of deformation induced precipitation on grain refinement and improvement of mechanical properties AA 7055 aluminum alloy10.1016/j.matchar.2017.05.038 ↗
37. Phase transformations in novel hot-deformed Al-Zn-Mg-Cu-Si-Mn-Fe(-Sc-Zr) alloys10.1016/j.matdes.2020.108821 ↗
38. Broberg · 1999 · 9
39. Hull · 1999
40. Distinct fatigue crack propagation limit of new precipitation-hardened aluminium alloy10.1016/j.scriptamat.2012.03.018 ↗
41. The high-cycle fatigue and fracture behavior of aluminum alloy 705510.1016/S0921-5093(99)00716-9 ↗
42. HCF of AA7050 alloy containing surface defects: study of the statistical size effect10.1016/j.ijfatigue.2018.01.012 ↗
43. Combined cycle fatigue of 7075 aluminum alloy - fracture surface characterization and short crack propagation10.1016/j.ijfatigue.2015.10.022 ↗
44. Microstructure evolution and recrystallization resistance of a 7055 alloy fabricated by spray forming technology and by conventional ingot metallurgy10.1007/s11661-020-05931-w ↗
45. Effects of annealing treatment on microstructure and tensile behavior of the Mg-Zn-Y-Nd alloy10.1016/j.jma.2019.07.011 ↗
46. Optimization of microstructure and mechanical property of a Mg-Zn-Y-Nd alloy by extrusion process10.1016/j.jallcom.2018.10.167 ↗