journal article·2024-05Open access

Additive manufacturing of hybrid continuous carbon/basalt fiber reinforced composites based on bi-matrix co-extrusion

Peng Qu, He Kong, Xunjin Li, Yonghao Lei, Anfu Guo, Shaoqing Wang, Hongbing Wang, Yunping Hu, Yi Wan, Jun Takahashi

Abstract

A novel three-dimensional (3D) printed hybrid continuous fiber reinforced bi-matrix composite is proposed in this paper to improve the flexural fracture energy and the designability of flexural mechanical properties, combining the excellent wettability of thermosetting resin to distinct fibers and the wonderful extrusion forming ability of thermoplastic for nozzle based additive manufacturing (AM). Numerical simulations are conducted by finite element (FE) and peridynamics (PD) models, enabling an in-depth study for the influence of printed hybrid configuration on flexural mechanical properties. The results show that assigning more basalt fibers at bottom effectively enhances the capability of flexural energy absorption, with the maximum enhancement of 126.1% in contrast to single-type carbon fiber reinforced samples. The combination of experimental analysis and numerical simulation has reference significance for structural optimization and failure prediction of hybrid continuous fiber composites printed by co-extrusion process.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Additive Manufacturing and 3D Printing Technologies · Innovations in Concrete and Construction Materials · Mechanical Behavior of Composites

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (58)

Show source-provided references
1. Additive manufacturing of continuous fiber reinforced polymer composites: Design opportunities and novel applications10.1016/j.coco.2021.100907 ↗
2. 3D printing of polymer composites: Materials, processes, and applications10.1016/j.matt.2021.10.018 ↗
3. 3D printed continuous fiber reinforced composite lightweight structures: A review and outlook10.1016/j.compositesb.2022.110450 ↗
4. A critical review on 3D printed continuous fiber-reinforced composites: History, mechanism, materials and properties10.1016/j.compstruct.2019.111476 ↗
5. Tensile strength enhancement of fused filament fabrication printed parts: a review of process improvement approaches and respective impact
6. Technologies in additive manufacturing for fiber reinforced composite materials: a review10.1016/j.coche.2020.01.001 ↗
7. A critical review on the fused deposition modeling of thermoplastic polymer composites10.1016/j.compositesb.2020.108336 ↗
8. Extrusion-based 3D printing applications of PLA composites: a review10.3390/coatings11040390 ↗
9. Mechanical and energy absorption behaviors of 3D printed continuous carbon/Kevlar hybrid thread reinforced PLA composites
10. Dynamic mechanical analysis performance of pure 3D printed polylactic acid (PLA) and acrylonitrile butadiene styrene (ABS)10.1016/j.matpr.2021.09.113 ↗
11. Quasi-static penetration property of 3D printed woven-like ramie fiber reinforced biocomposites10.1016/j.compstruct.2022.116313 ↗
12. Short basalt fibre reinforced recycled polypropylene filaments for 3D printing10.1016/j.matlet.2022.132942 ↗
13. 3D printing of PLA-TPU with different component ratios: fracture toughness, mechanical properties, and morphology10.1016/j.jmrt.2022.11.024 ↗
14. 3D printing and epoxy-infusion treatment of curved continuous carbon fibre reinforced dual-polymer composites10.1016/j.compositesb.2022.109687 ↗
15. Orientation predictions of fibers within 3D printed strand in material extrusion of polymer composites
16. Fused filament fabrication of fiber-reinforced polymers: a review
17. Current achievements and future outlook for composites in 3D printing10.1016/j.repl.2016.10.002 ↗
18. Recent progress in additive manufacturing of fiber reinforced polymer composite10.1002/admt.201800271 ↗
19. 3D printing for continuous fiber reinforced thermoplastic composites: mechanism and performance10.1108/RPJ-08-2015-0098 ↗
20. 3D-printed PEEK-carbon fiber (CF) composites: structure and thermal properties10.1016/j.compscitech.2018.05.032 ↗
21. Extrusion-based additively manufactured PAEK and PAEK/CF polymer composites performance: Role of process parameters on strength, toughness and deflection at failure10.3390/jcs7040157 ↗
22. Open-hole tensile properties of 3D-printed continuous carbon-fiber-reinforced thermoplastic laminates: experimental study and multiscale analysis10.1177/08927057221110791 ↗
23. Experimental and numerical investigation of the relationship between material defects and elastoplasticity behavior of 3D-printed carbon-fiber-reinforced thermoplastics under compressive loading10.1016/j.compscitech.2023.110116 ↗
24. Laser assisted additive manufacturing of continuous fiber reinforced thermoplastic composites10.1016/j.matdes.2017.06.013 ↗
25. An evaluation of three different techniques for melt impregnation of glass fiber bundles with polyamide 1210.1002/pen.24789 ↗
26. Fused deposition technique for continuous fiber reinforced thermoplastic10.1007/s11665-016-2459-8 ↗
27. Effects of set curvature and fiber bundle size on the printed radius of curvature by a continuous carbon fiber composite 3D printer
28. 3D printing of continuous flax fibre reinforced biocomposites for structural applications10.1016/j.matdes.2019.107884 ↗
29. Mechanical properties of hybrid composites reinforced by carbon and basalt fibers10.1016/j.ijmecsci.2018.08.007 ↗
30. A short review on basalt fiber reinforced polymer composites10.1016/j.compositesb.2014.12.011 ↗
31. Hybridization effects on quasi-static penetration resistance in fiber reinforced hybrid composite laminates10.1016/j.compositesb.2016.05.025 ↗
32. Overmolded hybrid composites of polyamide-6 on continuous carbon and glass fiber/epoxy composites: ‘An assessment of the interface10.1016/j.compositesa.2020.105771 ↗
33. Investigating the translaminar fracture toughness of 3D printed semi-woven and non-woven continuous carbon fibre composites10.1016/j.compstruct.2022.116605 ↗
34. Multi-scale numerical analysis of damage modes in 3D stitched composites10.1016/j.ijmecsci.2024.108983 ↗
35. Structural design and properties of hybrid continuous fiber reinforced composites based on 3D printing
36. Hybrid layout and additive manufacturing of continuous carbon/glass fibers reinforced composites, and its effect on mechanical properties10.1016/j.compstruct.2023.117133 ↗
37. Continuous fiber-reinforced material extrusion with hybrid composites of carbon and aramid fibers10.3390/app12178830 ↗
38. 3D printed continuous fibre-reinforced composites: design and characterisation of advanced pseudo-ductile hybrid laminates10.1016/j.compositesa.2021.106403 ↗
39. Simultaneous reinforcement of both rigidity and energy absorption of polyamide-based composites with hybrid continuous fibers by 3D printing10.1016/j.compstruct.2021.113854 ↗
40. Development of a two-matrix composite material fabricated by 3D printing10.1134/S1995421217010026 ↗
41. Intra/inter-ply shear behaviors of continuous fiber reinforced thermoplastic composites in thermoforming processes10.1016/j.compstruct.2011.01.002 ↗
42. A review of additive manufacturing technologies and markets for thermosetting resins and their potential for carbon fiber integration
43. Advances in hybrid fibers reinforced polymer-based composites prepared by FDM: a review on mechanical properties and prospects10.1016/j.coco.2023.101592 ↗
44. Development and examination of a two-matrix glassfiber composite with high transverse strain10.1007/BF00609647 ↗
45. Two-matrix composites: carbon fiber micropultrusions embedded in flexible epoxy matrices10.1016/j.compositesa.2018.08.008 ↗
46. Novel continuous fiber Bi-matrix composite 3-D printing technology10.3390/ma12183011 ↗
47. Mechanical investigation and microstructure performance of a two-matrix continuous carbon fibre composite fabricated by 3D printing10.1016/j.jmapro.2022.04.050 ↗
48. An investigation into mechanical properties of a 3D printed two-matrix continuous fiber composites with multi-cavity structure10.1016/j.jmrt.2023.08.132 ↗
49. Water absorption rates and mechanical properties of material extrusion-printed continuous carbon fiber-reinforced nylon composites10.1016/j.jmrt.2022.10.134 ↗
50. 2014
51. A novel heterogeneous-particle model based on peridynamics for flexural mechanical properties of randomly oriented fiber reinforced composites10.1016/j.compositesb.2022.110140 ↗
52. High-pressure interfacial impregnation by micro-screw in-situ extrusion for 3D printed continuous carbon fiber reinforced nylon composites10.1016/j.compositesa.2020.105770 ↗
53. A constitutive model for 3D printed continuous fiber reinforced composite structures with variable fiber content10.1016/j.compositesb.2020.107893 ↗
54. Hybrid effect of 3D-printed coaxial continuous hybrid fibre-reinforced composites10.1016/j.tws.2023.110820 ↗
55. 3D printing of continuous carbon fibre reinforced thermo-plastic (CFRTP) tensile test specimens10.4236/ojcm.2016.61003 ↗
56. Reformulation of elasticity theory for discontinuities and long-range forces10.1016/S0022-5096(99)00029-0 ↗
57. Modeling via peridynamics for large deformation and progressive fracture of hyperelastic materials10.1016/j.cma.2022.115739 ↗
58. A meshfree method based on the peridynamic model of solid mechanics10.1016/j.compstruc.2004.11.026 ↗