journal article·2024-07Open access

Microstructure, wear and corrosion resistance mechanism of as-cast lightweight refractory NbMoZrTiX (X = al, V) high-entropy alloys

Wenjie Chen, Xinmei Li

Abstract

Refractory high-entropy alloys (RHEAs) have good overall properties and potential high temperature applications, but they are not competitive in terms of light weight and wear and corrosion resistance, which severely limits the wide range of applications. In this paper, novel NbMoZrTi-X (Al, V) light refractory high entropy alloys (LRHEAs) were fabricated and their physical phase composition, microstructure, hardness, and wear and corrosion resistance were systematically investigated. The results show that NbMoZrTi LRHEA and NbMoZrTiV LRHEA are both single BCC structures, while NbMoZrTiAl LRHEA and NbMoZrTiAlV LRHEA are transformed into BCC, B2, and Zr5Al3 phase structures. The hardness increases as the volume fraction of the Zr5Al3 hard phase increases, with NbMoZrTiAl LRHEA having a maximum Vickers hardness of 811.29 HV. Room temperature dry friction tests showed that NbMoZrTiAl LRHEA had the lowest wear and coefficient of friction of 1.5 mg and 0.6713, respectively. Electrochemical tests performed in 3.5 wt% NaCl solution showed that NbMoZrTiAlV LRHEA has excellent corrosion resistance with the highest Ecorr (−0.142 V) and the lowest Icorr (2.149 × 10−7 A/cm2). Therefore, the addition of V and Al to NbMoZrTi-based LRHEA can effectively improve its wear and corrosion resistance due to the increase in hardness and dense passivation film formation. Our study provides a new strategy for designing LRHEAs with a combination of high hardness and excellent wear and corrosion resistance.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: High Entropy Alloys Studies · High-Temperature Coating Behaviors · Additive Manufacturing Materials and Processes

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (57)

Show source-provided references
1. Curr Sci · 2003 · 85 · 1404
2. Grain boundary energy effect on grain boundary segregation in an equiatomic high-entropy alloy
3. Effect of cold rolling reduction ratio on microstructure and mechanical properties of Fe–10Mn–4Al-0.4C steel containing δ ferrite
4. Microstructural features and improved reversible hydrogen storage properties of ZrTiVFe high-entropy alloy via Cu alloying10.1016/j.ijhydene.2022.10.130 ↗
5. Mechanical and chemical properties of CoCrFeNiMo0.2 high entropy alloy coating fabricated on Ti6Al4V by laser cladding
6. Laser deposition of high-entropy alloys: a comprehensive review
7. Recent advances of high entropy alloys for aerospace applications: a review, World
8. Refractory high-entropy alloys10.1016/j.intermet.2010.05.014 ↗
9. Enhanced strength and ductility in a high-entropy alloy via ordered oxygen complexes10.1038/s41586-018-0685-y ↗
10. Phase stability and deformation behavior of TiZrHfNbO high-entropy alloys
11. Effect of interstitial oxygen/nitrogen on mechanical and wear properties of TiZrHfNb refractory high-entropy alloy
12. ZrC reinforced refractory-high-entropy-alloy coatings: compositional design, synthesis, interstitials, and microstructure evolution effects on wear, corrosion and oxidation behaviors
13. Structural stability and thermal expansion of TiTaNbMoZr refractory high entropy alloy
14. Microstructure and mechanical properties of the TiZrNbMoTa refractory high-entropy alloy produced by mechanical alloying and spark plasma sintering10.1016/j.ijrmhm.2020.105357 ↗
15. Structure and mechanical properties of novel lightweight refractory high entropy alloys NbMoTiZr-(Al/V): a combined first principles and experimental study10.1016/j.jallcom.2023.172855 ↗
16. Tribo-corrosion resistance of Ti-Nb-Cr-Mo-Al refractory high-entropy alloys in molten aluminum
17. Laser metal deposition of compositionally graded TiZrNbTa refractory high-entropy alloys using elemental powder blends
18. Phase decomposition behavior and its effects on mechanical properties of TiNbTa0.5ZrAl0.5 refractory high entropy alloy10.1016/j.jmst.2020.05.038 ↗
19. Microstructures and mechanical properties of HfNbTaTiZrW and HfNbTaTiZrMoW refractory high-entropy alloys10.1016/j.jallcom.2019.06.138 ↗
20. Solution strengthening of ductile refractory HfMoxNbTaTiZr high-entropy alloys10.1016/j.matlet.2016.03.133 ↗
21. Deformation and tribological behavior of ductile refractory high-entropy alloys
22. Helium ion irradiation enhanced precipitation and the impact on cavity formation in a HfNbZrTi refractory high entropy alloy
23. Hot deformation behavior and processing maps of an equiatomic MoNbHfZrTi refractory high entropy alloy10.1016/j.intermet.2020.106921 ↗
24. Microstructure and mechanical properties of in-situ MC-carbide particulates-reinforced refractory high-entropy Mo 0.5 NbHf 0.5 ZrTi matrix alloy composite10.1016/j.intermet.2015.09.011 ↗
25. Structure and mechanical properties of a light-weight AlNbTiV high entropy alloy10.1016/j.matlet.2014.11.162 ↗
26. Structure and mechanical properties of B2 ordered refractory AlNbTiVZrx (x = 0–1.5) high-entropy alloys10.1016/j.msea.2017.08.019 ↗
27. Microstructure and mechanical properties of a novel refractory AlNbTiZr high-entropy alloy10.1080/02670836.2018.1446267 ↗
28. Microstructure and mechanical properties of Ti3V2NbAlxNiy low-density refractory multielement alloys
29. A low-density high-entropy dual-phase alloy with hierarchical structure and exceptional specific yield strength
30. Order and disorder in amorphous and high-entropy materials10.1007/s11661-021-06250-4 ↗
31. Thermodynamic assessment of the Al-Zr binary system10.1007/s12385-001-0072-4 ↗
32. Microstructure and mechanical properties of a novel refractory AlNbTiZr high-entropy alloy10.1080/02670836.2018.1446267 ↗
33. Effect of Ti on microstructure and mechanical properties of Al0.8Nb0.5TixV2Zr0.5 refractory complex concentrated alloys
34. Corrosion behavior and passive film characteristics of AlNbTiZrSix high-entropy alloys in simulated seawater environment
35. Effect of Ti content on the microstructure and mechanical properties of TixZrNbMoV lightweight refractory high-entropy alloys10.1016/j.ijrmhm.2023.106547 ↗
36. Effect of aluminum on the microstructure and properties of two refractory high-entropy alloys10.1016/j.actamat.2014.01.029 ↗
37. Interdiffusion and atomic mobility in bcc Ti–rich Ti–Nb–Zr system10.1016/j.calphad.2017.12.002 ↗
38. Recent progress in lightweight high-entropy alloys10.1557/s43579-023-00405-7 ↗
39. Tribological behavior of an AlCoCrFeNi 2.1 eutectic high entropy alloy sliding against different counterfaces10.1016/j.triboint.2020.106599 ↗
40. Investigation of microstructure and tribological properties of CoFeNi1.5VZrx eutectic high entropy alloys optimized by tunning Zr content10.1016/j.triboint.2023.109154 ↗
41. Application of continuum damage mechanics for prediction of wear with provision for sequential speed operation10.1007/s11249-022-01645-9 ↗
42. Surface modification for AlCoCrFeNi2.1 eutectic high-entropy alloy via laser remelting technology and subsequent aging heat treatment10.1016/j.jallcom.2021.162380 ↗
43. A superfine eutectic microstructure and the mechanical properties of CoCrFeNiMox high-entropy alloys10.1557/jmr.2018.177 ↗
44. Wear-related topography changes for electroplated cBN grinding wheels and their effect on thermo-mechanical load
45. Synthesis of chitosan/nickel oxide nanocomposite for corrosion prevention of copper in NaCl solution10.1016/j.matpr.2022.08.056 ↗
46. Insight into electrochemical passivation behavior and surface chemistry of 2205 duplex stainless steel: effect of tensile elastic stress
47. Lightweight Ti-Zr-Nb-Al-V refractory high-entropy alloys with superior strength-ductility synergy and corrosion resistance
48. Evaluation of corrosion resistance of the single-phase light refractory high entropy alloy TiCrVNb0.5Al0.5 in chloride environment
49. Corrosion of Al xCoCrFeNi high-entropy alloys: Al-content and potential scan-rate dependent pitting behavior10.1016/j.corsci.2017.02.019 ↗
50. A non-equiatomic FeNiCoCr high-entropy alloy with excellent anti-corrosion performance and strength-ductility synergy
51. Effect of Nb addition on the stability and biological corrosion resistance of Ti-Zr alloy passivation films10.1016/j.corsci.2020.108696 ↗
52. Some observations regarding the influence of molybdenum on the pitting corrosion resistance of stainless steels10.1016/S0010-938X(97)00118-2 ↗
53. Corrosion susceptibility of passive films on 1060, 2024, and 5083 aluminum alloys: experimental study and first-principles calculations10.1149/1945-7111/accab8 ↗
54. Electrochemical performance of passive film formed on Ti-Al-Nb-Zr alloy in simulated deep sea environments10.1007/s40195-019-00958-4 ↗
55. Effect of Ti content on the microstructure and properties of CoCrFeNiMnTix high entropy alloy10.3390/e24020241 ↗
56. Corrosion and passive behavior of AlxCrFeNi3-x (x=0.6, 0.8, 1.0) eutectic high entropy alloys in chloride environment10.1016/j.corsci.2022.110666 ↗
57. Effect of the grain size on the corrosion behavior of CoCrFeMnNi HEAs in a 0.5 M H2SO4 solution10.1016/j.jallcom.2020.157712 ↗