journal article·2023-03Open access

Constructing 3D expanded graphite-silver segregated network structure for ultra-efficient EMI shielding and low reflection

Jianming Yang, Yujian Chen, Chen Liu, Hu Wang, Xin Yan, Xianzhi Chai, Zhipeng Chen, Youyi Xia, Hong Gao, Hexin Zhang, Xia Liao

Abstract

Lightweight, flexible and high-performance (high efficiency and low reflection) electromagnetic interference (EMI) shielding materials are urgently needed to cope with the increasingly complex electromagnetic (EM) radiation environment. In this study, the thermoplastic polyurethane/expanded graphite/silver (TPU/EG/Ag) composite foams with three-dimensional (3D) isolated conductive network were successfully manufactured through the combination of supercritical carbon dioxide (scCO2) foaming and chemical deposition. This composite foam achieves a conductivity up to 171.2 S/m and an EMI SE of 56.3 dB with only 0.58 vol% Ag on account of the volume exclusion of pores and the selective enrichment of Ag nanoparticles. The weight reduction rate of the composite exceeds 74%, and the density of the foamed sample can be as low as 0.21 g/cm3 by introducing a porous structure. Interestingly, the presence of porosity also alleviates impedance mismatch between the composites and air, and the reflectivity of composite is reduced from 99% to 31% owing to the multiple absorption in porous structure, which significantly weakens the serious secondary EM radiation pollution. Moreover, benefiting from the secondary melting at the interface of the TPU isolation unit, these composite foams exhibit favorable compressible recovery performance and shielding stability after 50 cycles of compression. This work proposes a new idea for the lightweight and flexible design of EMI shielding composites, opening a new path for the development of next-generation absorption-based EMI shielding materials.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Electromagnetic wave absorption materials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (54)

Show source-provided references
1. Construction of compressible polymer/MXene composite foams for high-performance absorption-dominated electromagnetic shielding with ultra-low reflectivity10.1016/j.carbon.2020.11.036 ↗
2. 2D MXenes for electromagnetic shielding: a review
3. Nature inspired hierarchical structures in nano-cellular epoxy/graphene-Fe3O4 nanocomposites with ultra-efficient EMI and robust mechanical strength10.1016/j.jmst.2021.06.030 ↗
4. Ultrathin flexible poly(vinylidene fluoride)/MXene/silver nanowire film with outstanding specific EMI shielding and high heat dissipation10.1007/s42114-021-00224-1 ↗
5. Progress in the foaming of polymer-based electromagnetic interference shielding composites by supercritical CO210.1002/asia.202201000 ↗
6. Lightweight, flexible cellulose-derived carbon aerogel@reduced graphene oxide/PDMS composites with outstanding EMI shielding performances and excellent thermal conductivities10.1007/s40820-021-00624-4 ↗
7. Multifunctional wearable silver nanowire decorated leather nanocomposites for joule heating, electromagnetic interference shielding and piezoresistive sensing
8. Asymmetric conductive polymer composite foam for absorption dominated ultra-efficient electromagnetic interference shielding with extremely low reflection characteristics10.1039/D0TA01393E ↗
9. Fabrication and investigation on the ultra-thin and flexible Ti3C2Tx/co-doped polyaniline electromagnetic interference shielding composite films10.1016/j.compscitech.2019.107833 ↗
10. Construction mechanism and prospective of conductive polymer composites with multiple interfaces for electromagnetic interference shielding: a review10.1016/j.carbon.2021.02.047 ↗
11. Overview of carbon nanostructures and nanocomposites for electromagnetic wave shielding10.1016/j.carbon.2018.09.006 ↗
12. Multifunctional electromagnetic interference shielding films comprised of multilayered thermoplastic polyurethane membrane and silver nanowire10.1016/j.compositesa.2021.106472 ↗
13. Selective electromagnetic interference shielding performance and superior mechanical strength of conductive polymer composites with oriented segregated conductive networks10.1016/j.cej.2019.05.074 ↗
14. Electromagnetic interference shielding enhancement of poly(lacticacid)-based carbonaceous nanocomposites by poly(ethyleneoxide)-assisted segregated structure: a comparative study of carbon nanotubes and graphene nanoplatelets10.1007/s42114-021-00320-2 ↗
15. Gradient structure design of lightweight and flexible silicone rubber nanocomposite foam for efficient electromagnetic interference shielding10.1016/j.cej.2020.124589 ↗
16. Formation of a segregated electrically conductive network structure in a low-melt-viscosity polymer for highly efficient electromagnetic10.1021/acssuschemeng.6b00526 ↗
17. Superhydrophobic and flexible silver nanowire-coated cellulose filter papers with sputter-deposited nickel nanoparticles for ultrahigh electromagnetic interference shielding10.1021/acsami.1c03692 ↗
18. Recent advances and perspectives on silver-based polymer composites for electromagnetic interference shielding10.1039/D2TC03821H ↗
19. Facile and green method to structure ultralow-threshold and lightweight polystyrene/MWCNT composites with segregated conductive networks for efficient electromagnetic interference shielding10.1021/acssuschemeng.9b00678 ↗
20. Structured reduced graphene oxide/polymer composites for ultra-efficient electromagnetic interference shielding10.1002/adfm.201403809 ↗
21. Fabrication, mechanisms and perspectives of conductive polymer composites with multiple interfaces for electromagnetic interference shielding: a review10.1016/j.carbon.2021.02.047 ↗
22. Layered foam/film polymer nanocomposites with highly efficient EMI shielding properties and ultralow reflection10.1007/s40820-021-00759-4 ↗
23. Fabrication of a lightweight and flexible silicon rubber foams with ultra-efficient electromagnetic interference shielding and adjustable low reflectivity10.1039/C9TC05152J ↗
24. Enhancement of electrical conductivity and electromagnetic interference shielding performance via supercritical CO2 induced phase coarsening for double percolated polymer blends10.1007/s12274-022-4867-4 ↗
25. Absorption-dominant, low reflection EMI shielding materials with integrated metal mesh/TPU/CIP composite10.1016/j.cej.2021.131167 ↗
26. Anomalous absorption of electromagnetic waves by 2D transition metal carbonitride Ti3CNTX (MXene)10.1126/science.aba7977 ↗
27. Facile preparation of lightweight high-strength biodegradable polymer/multi-walled carbon nanotubes nanocomposite foams for electromagnetic interference shielding10.1016/j.carbon.2016.04.052 ↗
28. Efficient electrical conductivity and electromagnetic interference shielding performance of double percolated polymer composite foams by phase coarsening in supercritical CO210.1016/j.compscitech.2021.108895 ↗
29. Lightweight electromagnetic interference shielding poly(L-lactic acid)/poly(D-lactic acid)/carbon nanotubes composite foams prepared by supercritical CO2 foaming10.1016/j.ijbiomac.2022.04.227 ↗
30. Microcellular epoxy/reduced graphene oxide/multi-walled carbon nanotube nanocomposite foams for electromagnetic interference shielding10.1016/j.apsusc.2021.149232 ↗
31. Lightweight Ti2CTx MXene/poly(vinyl alcohol) composite foams for electromagnetic wave shielding with absorption-dominated feature10.1021/acsami.8b21671 ↗
32. Nanocellular poly(ether-block-amide)/MWCNT nanocomposite films fabricated by stretching-assisted microcellular foaming for high-performance EMI shielding applications10.1039/D0TC04099A ↗
33. Light-weight and flexible silicone rubber/MWCNTs/Fe3O4 nanocomposite foams for efficient electromagnetic interference shielding and microwave absorption10.1016/j.compscitech.2019.05.027 ↗
34. Gradient structure silicone rubber composites for selective electromagnetic interference shielding enhancement and low reflection10.1016/j.compscitech.2022.109688 ↗
35. Constructing 3D carbon-metal hybrid conductive network in polymer for ultra-efficient electromagnetic interference shielding10.1016/j.compositesb.2021.108690 ↗
36. Heterogeneous silicon rubber composite foam with gradient porous structure for highly absorbed ultra-efficient electromagnetic interference shielding10.1016/j.compscitech.2021.108663 ↗
37. Nanocellular poly(ether-block-amide)/MWCNT nanocomposite films fabricated by stretching assisted microcellular foaming for highper-formance EMI shielding applications10.1039/D0TC04099A ↗
38. The influence of gradient and sandwich configurations on the electromagnetic interference shielding performance of multilayered thermoplastic polyurethane/graphene composite foams10.1016/j.compscitech.2016.12.002 ↗
39. Microwave-assisted foaming and sintering to prepare lightweight high-strength polystyrene/carbon nanotube composite foams with an ultralow percolation threshold10.1039/D1TC01923F ↗
40. Flexible and efficient electromagnetic interference shielding materials from ground tire rubber10.1016/j.carbon.2017.05.100 ↗
41. Microwave-induced segregated composite network with MXene as interfacial solder for ultra-efficient electromagnetic interference shielding and anti-dripping10.1016/j.cej.2021.131699 ↗
42. Micro-porous MXene/aramid nanofibers hybrid aerogel with reversible compression and efficient EMI shielding performance10.1016/j.compositesb.2021.108853 ↗
43. Lightweight and anisotropic porous MWCNT/WPU composites for ultrahigh performance electromagnetic interference shielding10.1002/adfm.201503579 ↗
44. Polymer-assisted fabrication of silver nanowire cellular monoliths: toward hydrophobic and ultraflexible high-performance electromagnetic interference shielding materials10.1021/acsami.0c10492 ↗
45. Thermal insulating rubber foams embedded with segregated carbon nanotube networks for electromagnetic shielding applications10.1016/j.cej.2022.135118 ↗
46. Flexible and multifunctional phase change composites featuring high-efficiency electromagnetic interference shielding and thermal management for use in electronic devices10.1016/j.cej.2021.132928 ↗
47. Ultralight, highly compressible, thermally stable MXene/aramid nanofiber anisotropic aerogels for electromagnetic interference shielding10.1039/D1TA11025J ↗
48. Absorption dominated high-performance electromagnetic interference shielding epoxy/functionalized reduced graphene oxide/Ni-chains microcellular foam with asymmetric conductive structure10.1016/j.compscitech.2022.109419 ↗
49. Promising PVDF-CNT-Graphene-NiCo chains composite films with excellent electromagnetic interference shielding performance
50. Lightweight Ti2CTx MXene/poly(vinyl alcohol) composite foams for electromagnetic wave shielding with absorption-dominated feature10.1021/acsami.8b21671 ↗
51. Electrically conductive gradient structure design of thermoplastic polyurethane composite foams for efficient electromagnetic interference shielding and ultra-low microwave reflectivity10.1016/j.cej.2021.130365 ↗
52. Flexible, stretchable and magnetic Fe3O4@Ti3C2Tx/elastomer with supramolecular interfacial crosslinking for enhancing mechanical and electromagnetic interference shielding performance10.1007/s40843-020-1539-2 ↗
53. Soft liquid-metal/elastomer foam with compression-adjustable thermal conductivity and electromagnetic interference shielding10.1016/j.cej.2020.128288 ↗
54. Hydrophobic, flexible, and lightweight MXene foams for high-performance electromagnetic-interference shielding10.1002/adma.201702367 ↗