Investigation of the mechanical properties of different amorphous composites using the molecular dynamics simulation
Source abstract
Abstract
Metal matrix composites have various structural and thermal applications in terms of their unique mechanical and thermal properties compared to their counterparts. These nanoparticle (NP)-reinforced composites have received much attention due to their relatively low production costs and excellent mechanical properties. In the present research, modeling and studying the effects of adding reinforcing NP on the hardness of aluminium-based composites is done using the molecular dynamics (MD) simulation. The expressed structures' equilibration, temperature, and potential energy are calculated and reported in the first simulation stage. In this regard, the parameters of Lennard-Jones potential function for the particles in the MD simulation of aluminium and oxygen. Finally, the results show that the hardness of pure nanocomposite (NC) was equal to 100, and by adding NP with a mass ratio of 6%, the hardness of NC increased from 100 to 190 HV. The radial distribution function (RDF) showed that the composition was in the solid phase at a temperature of 300 K, indicating the proper balance of simulated atomic systems. The results show that the maximum value of RDF decreased by increasing the amount of reinforcement. The results show that the yield stress decreased as the volume fraction of reinforcement increased in the crystal structure. Finally, it is expected that the results obtained from MD simulations will be considered in the practical use of aluminium NCs reinforced with alumina nanoparticles in various industrial, engineering and medical uses.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Aluminum Alloys Composites Properties · Graphene research and applications · Thermal properties of materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (45)
Show source-provided references
1. Influence of CeO2 addition on forming quality and microstructure of TiCx-reinforced CrTi4-based laser cladding composite coating10.1016/j.matchar.2020.110732 ↗
2. Influence of Y2O3 addition on the microstructure of TiC reinforced Ti-based composite coating prepared by laser cladding10.1016/j.matchar.2022.111962 ↗
3. In vitro Anti-inflammatory activity of Silymarin/Hydroxyapatite/Chitosan Nanocomposites and its cytotoxic effect using Brine shrimp lethality assay: nanocomposite for biomedical applications
4. Test methods for fibre/matrix adhesion in cellulose fibre-reinforced thermoplastic composite materials: a critical review10.7569/RAA.2020.097306 ↗
5. Effects of minor Nd and Er additions on the precipitation evolution and dynamic recrystallization behavior of Mg–6.0Zn–0.5Mn alloy10.1016/j.jma.2020.06.018 ↗
6. Magazyny ciepła ze złożem naturalnym i złożem na bazie materiałów zmiennofazowych
7. Cu-based metallic glass particle additions to significantly improve overall compressive properties of an Al alloy10.1016/j.compositesa.2010.07.004 ↗
8. Interfacial reaction during the fabrication of Ni60Nb40 metallic glass particles-reinforced Al based MMCs10.1016/j.msea.2006.08.077 ↗
9. Research advances of amorphous metal oxides in electrochemical energy storage and conversion10.1002/smll.201804371 ↗
10. Amorphous metals for hard-tissue prosthesis
11. Microstructure and mechanical properties of ultrasonic spot welding TiNi/Ti6Al4V dissimilar materials using pure Al coating10.1016/j.jmapro.2021.02.009 ↗
12. Water jet impact damage mechanism and dynamic penetration energy absorption of 2A12 aluminum alloy10.1016/j.vacuum.2022.111532 ↗
13. Effect of heat treatment process on the micro machinability of 7075 aluminum alloy10.1016/j.vacuum.2022.111574 ↗
14. Effect of aging plus cryogenic treatment on the machinability of 7075 aluminum alloy10.1016/j.vacuum.2022.111692 ↗
15. Microstructure and mechanical properties of dissimilar NiTi/Ti6Al4V joints via back-heating assisted friction stir welding10.1016/j.jmapro.2021.01.024 ↗
16. Investigation of welding crack in micro laser welded NiTiNb shape memory alloy and Ti6Al4V alloy dissimilar metals joints10.1016/j.optlastec.2016.12.028 ↗
17. Incremental sheet forming of metal-based composites used in aviation and automotive applications10.3390/jcs6100295 ↗
18. The melting behavior of aluminum nanoparticles10.1016/j.tca.2007.07.007 ↗
19. Constrained melting of graphene-based phase change nanocomposites inside a sphere10.1007/s10973-019-08458-4 ↗
20. Preparation, thermal and rheological properties of hybrid nanocomposite phase change material for thermal energy storage10.1016/j.apenergy.2013.11.029 ↗
21. Molecular dynamics studies on the strengthening mechanism of Al matrix composites reinforced by grapnene nanoplatelets10.1016/j.commatsci.2018.06.023 ↗
22. Qiu · 2022
23. Fabrication of Ni–Nb–Ta metallic glass reinforced Al-based alloy matrix composites by infiltration casting process10.1016/j.scriptamat.2004.02.038 ↗
24. D. Yadav, P. Gupta, and N. Yedla, "Nano-indentation of aluminium reinforced metallic glass composites: a molecular dynamics study." p. 012036.10.1088/1757-899X/338/1/012036 ↗
25. Molecular dynamics studies on the sintering and mechanical behaviors of graphene nanoplatelet reinforced aluminum matrix composites10.1088/1361-651X/ab2095 ↗
26. Geometrical aspects of nanofillers influence the tribological performance of Al-based nanocomposites
27. A molecular dynamics simulation study to investigate the effect of filler size on elastic properties of polymer nanocomposites10.1016/j.compscitech.2006.09.015 ↗
28. Synthesis, characterization, and properties of graphene reinforced metal-matrix nanocomposites10.1016/j.compositesb.2019.107664 ↗
29. Microstructure, hardness, and tribology properties of the (Cu/MoS2)/graphene nanocomposite via the electroless deposition and powder metallurgy technique10.1177/0021998320916528 ↗
30. Preparation of high strength graphene reinforced Cu-based nanocomposites via mechanical alloying method: microstructural, mechanical and electrical properties10.1007/s00339-020-3412-0 ↗
31. Morphological and wear behaviour of new Al-SiCmicro-SiCnano hybrid nanocomposites fabricated through powder metallurgy10.1088/2053-1591/aabcf0 ↗
32. Study of structural and mechanical behaviour of Al-ZrO2 metal matrix nanocomposites prepared by powder metallurgy method10.1016/j.matpr.2020.02.570 ↗
33. Experimental study on the influence of bionic channel structure and nanofluids on power generation characteristics of waste heat utilisation equipment10.1016/j.applthermaleng.2021.117893 ↗
34. Numerical analysis of flow and heat characteristic around micro-ribbed tube in heat exchanger system10.1016/j.powtec.2021.10.009 ↗
35. Numerical simulation of flow and heat transfer characteristics of nanofluids in built-in porous twisted tape tube10.1016/j.powtec.2021.07.066 ↗
36. Thermo-hydraulic performance of nanofluids in a bionic heat sink10.1016/j.icheatmasstransfer.2021.105492 ↗
37. Rapaport · 2004
38. Computer" experiments" on classical fluids. I. Thermodynamical properties of Lennard-Jones molecules10.1103/PhysRev.159.98 ↗
39. A computer simulation method for the calculation of equilibrium constants for the formation of physical clusters of molecules: application to small water clusters10.1063/1.442716 ↗
40. Cohesion10.1088/0959-5309/43/5/301 ↗
41. UFF, a full periodic table force field for molecular mechanics and molecular dynamics simulations10.1021/ja00051a040 ↗
42. The missing term in effective pair potentials10.1021/j100308a038 ↗
43. Embedded-atom method: derivation and application to impurities, surfaces, and other defects in metals10.1103/PhysRevB.29.6443 ↗
44. M. Foroutan, and S. M. Fatemi, “Molecular dynamics simulations of systems containing nanostructures.”.
45. A comparative study on wear properties of nanostructured Al and Al/Al2O3 nanocomposite prepared by microwave-assisted hot press sintering and conventional hot pressing10.1007/s12206-015-0813-7 ↗