Design of porous structure based on the Voronoi diagram and stress line for better stress shielding relief and permeability
Source abstract
Abstract
In the process of artificial metal bone implantation, the mismatch of elastic modulus and bad permeability behavior lead to obvious stress shielding and poor bone tissue ingrowth. For these problems, this paper proposed a new design method of the variable porosity porous structure based on the stress line and Voronoi diagram. In the design process, the principal stress line was determined by mechanical finite element analysis, which controlled the seeds distribution of the 3D Voronoi diagram, making local porosity conforms to the stress distribution. In addition, the designed samples were fabricated through laser powder bed fusion (L-PBF) technology with TC4 powders. The mechanical characteristics were evaluated by static mechanical simulation with ABAQUS and compression tests, and the permeability characteristics were analyzed by fluid simulation with COMSOL and in vitro and vivo test. The research results showed that the designed structure obtained the relatively low elastic modulus and higher mechanical strength, the designed structure has closer permeability characteristics to the reconstructed natural bone, and was conducive to cell proliferation. So the porous structure based on the stress line and Voronoi diagram might have good application potential in the bionic design of bone implants.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Bone Tissue Engineering Materials · Cellular and Composite Structures · Dental Implant Techniques and Outcomes
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (33)
Show source-provided references
1. Additive manufacturing technology for porous metal implant applications and triple minimal surface structures: a review
2. Bionic mechanical design and 3D printing of novel porous Ti6Al4V implants for biomedical applications10.1631/jzus.B1800622 ↗
3. Design and manufacturing of biomimetic porous metal implants10.1557/s43578-021-00307-1 ↗
4. Creation of a unit block library of architectures for use in assembled scaffold engineering10.1016/j.cad.2005.02.005 ↗
5. Effect of technical parameters on porous structure and strength of 3D printed calcium sulfate prototypes10.1016/j.rcim.2015.06.005 ↗
6. Additively manufactured metallic porous biomaterials based on minimal surfaces: a unique combination of topological, mechanical, and mass transport properties10.1016/j.actbio.2017.02.024 ↗
7. Advanced porous scaffold design using multi-void triply periodic minimal surface models with high surface area to volume ratios10.1007/s12541-014-0516-5 ↗
8. Computer-aided porous scaffold design for tissue engineering using triply periodic minimal surfaces10.1007/s12541-011-0008-9 ↗
9. Concurrent design of hierarchical structures with three-dimensional parameterized lattice microstructures for additive manufacturing10.1007/s00158-019-02408-2 ↗
10. Femoral stem incorporating a diamond cubic lattice structure: design, manufacture and testing10.1016/j.jmbbm.2017.08.034 ↗
11. Mechanical behaviours and mass transport properties of bone-mimicking scaffolds consisted of gyroid structures manufactured using selective laser melting10.1016/j.jmbbm.2019.01.023 ↗
12. Continuous functionally graded porous titanium scaffolds manufactured by selective laser melting for bone implants10.1016/j.jmbbm.2018.01.013 ↗
13. Design of graded lattice structure with optimized mesostructures for additive manufacturing10.1016/j.matdes.2018.01.011 ↗
14. Functional response of osteoblasts in functionally gradient titanium alloy mesh arrays processed by 3D additive manufacturing10.1016/j.colsurfb.2016.09.050 ↗
15. Functionally graded porous scaffolds in multiple patterns: new design method, physical and mechanical properties10.1016/j.matdes.2018.09.053 ↗
16. Mechanical properties and in vitro behavior of additively manufactured and functionally graded Ti6Al4V porous scaffolds10.3390/met8040200 ↗
17. Apparent permeability study of rarefied gas transport properties through ultra-tight VORONOI porous media by Discrete Velocity Method10.1016/j.jngse.2019.103100 ↗
18. Parametric design of Voronoi-based lattice porous structures10.1016/j.matdes.2020.108607 ↗
19. Additive manufacturing of Bio-inspired ceramic bone Scaffolds: structural Design, mechanical properties and biocompatibility10.1016/j.matdes.2022.110610 ↗
20. Design and compressive behavior of controllable irregular porous scaffolds: based on voronoi-tessellation and for additive manufacturing10.1021/acsbiomaterials.7b00916 ↗
21. Design and statistical analysis of irregular porous scaffolds for orthopedic reconstruction based on voronoi tessellation and fabricated via selective laser melting (SLM)10.1016/j.matchemphys.2019.121968 ↗
22. Finite element analysis of mechanical behavior, permeability of irregular porous scaffolds and lattice-based porous scaffolds10.1088/2053-1591/ab3ac1 ↗
23. Trabecular-like Ti–6Al–4V scaffold for bone repair: a diversified mechanical stimulation environment for bone regeneration10.1016/j.compositesb.2022.110057 ↗
24. A design method of Voronoi porous structures with graded relative elasticity distribution for functionally gradient porous materials10.1007/s10999-021-09558-6 ↗
25. Fabrication of a zirconia/calcium silicate composite scaffold based on digital light processing10.1016/j.ceramint.2022.05.269 ↗
26. In-situ deposition of apatite layer to protect Mg-based composite fabricated via laser additive manufacturing10.1016/j.jma.2021.04.009 ↗
27. Mechanical properties and biocompatibility of MgO/Ca3(PO4)2 composite ceramic scaffold with high MgO content based on digital light processing10.1016/j.ceramint.2022.04.010 ↗
28. Microstructure evolution and texture tailoring of reduced graphene oxide reinforced Zn scaffold
29. Semicoherent strengthens graphene/zinc scaffolds10.1016/j.mtnano.2021.100163 ↗
30. Trabecular-like Ti-6Al-4V scaffolds for orthopedic: fabrication by selective laser melting and in vitro biocompatibility10.1016/j.jmst.2019.01.012 ↗
31. Fatigue behavior of porous biomaterials manufactured using selective laser melting10.1016/j.msec.2013.08.006 ↗
32. Fully porous 3D printed titanium femoral stem to reduce stress-shielding following total hip arthroplasty10.1002/jor.23445 ↗
33. Architected cellular materials: a review on their mechanical properties towards fatigue-tolerant design and fabrication10.1016/j.mser.2021.100606 ↗