Comparison between alternative chemical treatments on coir fibers for application in cementitious materials
Source abstract
Abstract
Agricultural production generates several residues, for example, oilseed residues (cotton, soy, sunflower, and palm oil) and fruit residues (coconut, pineapple, and cashew). Research shows several agents for the surface treatment of natural fibers, such as using alkalis in different proportions and exposure times. The chemical treatment removes surface impurities like wax, oils, fats, and insoluble compounds. However, few studies investigate the effect of chemical treatment type on coir fibers' physical-mechanical and microstructural properties. In this context, the present work aims to evaluate the impact of three chemical treatments: sodium hydroxide, oxalic acid with a concentration of 5 (wt. %) (1 and 2h), and sodium bicarbonate 10 (wt. %) (120 and 168h) in coir fibers. This study investigated the contents of extractives, lignin, hemicellulose and cellulose contents, mechanical properties, Fourier transform infrared spectroscopy, contact angle test, atomic force microscopy, scanning electron microscopy, X-ray diffraction, and thermogravimetric analysis. Besides, the FTIR test showed the removal partial of the amorphous constituents. The best results obtained by the treatment content of oxalic acid for one hour promote a partial removal of extractives, lignin, and hemicellulose content. In addition, tensile strength increased by 22.9% compared to the untreated fibers. The increase in fiber roughness due to the chemical treatments promote better interaction with the cement paste and can reinforce cementitious materials.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Natural Fiber Reinforced Composites · Advanced Cellulose Research Studies · Nanocomposite Films for Food Packaging
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (58)
Show source-provided references
1. Natural fibre reinforced composite materials: environmentally better life cycle assessment – a case study10.1016/j.matpr.2020.02.651 ↗
2. Turning waste plant fibers into advanced plant fiber reinforced polymer composites: a comprehensive review10.1016/j.jcomc.2022.100333 ↗
3. An overview: natural fiber reinforced hybrid composites, chemical treatments and application areas10.1016/j.matpr.2020.01.011 ↗
4. A review of coir fibre and coir fibre reinforced cement-based composite materials (2000–2021)10.1016/j.jclepro.2022.130676 ↗
5. Stokke · 2014
6. Extraction and characterization of natural lignocellulosic fibres from Typha angustata grass10.1016/j.ijbiomac.2022.09.273 ↗
7. Plant aggregates and fibers in earth construction materials: a review10.1016/j.conbuildmat.2016.02.119 ↗
8. Effects of incorporating hybrid fibres on rheological and mechanical properties of fibre reinforced concrete10.1016/j.conbuildmat.2020.120561 ↗
9. Effects of short coconut fiber on the mechanical properties, plastic cracking behavior, and impact resistance of cementitious composites10.1016/j.conbuildmat.2016.09.118 ↗
10. Durability of coating mortars containing açaí fibers
11. Recent researches in fiber reinforced composite materials: a review
12. Effect of fiber treatment on flexural properties of natural fiber reinforced composites: a review10.1016/j.ejpe.2017.11.005 ↗
13. Mechanical properties of coconut fibers reinforced polyester composites10.1016/j.proeng.2011.04.343 ↗
14. Effect of nano silica and coir fiber on compressive strength and abrasion resistance of Concrete10.1016/j.conbuildmat.2019.07.232 ↗
15. Physical and mechanical properties of agglomerated panels made from bamboo fiber and vegetable resin10.1016/j.conbuildmat.2017.09.003 ↗
16. Effect of alkali treatment on microstructure and mechanical properties of coir fibres, coir fibre reinforced-polymer composites and reinforced-cementitious composites10.1016/j.conbuildmat.2016.02.182 ↗
17. Impact of polyethylene fiber on the ductility and durability of magnesium phosphate cement
18. Effect of postharvest oxalic acid application on enzymatic browning and quality of lotus (Nelumbo nucifera Gaertn.) root slices10.1016/j.foodchem.2019.126051 ↗
19. Reductive release of Fe mineral-associated organic matter accelerated by oxalic acid10.1016/j.scitotenv.2020.142937 ↗
20. Fully bio-based agro-waste soy stem fiber reinforced bio-epoxy composites for lightweight structural applications: influence of surface modification techniques10.1016/j.conbuildmat.2021.124509 ↗
21. A new eco-friendly chemical treatment of natural fibres: effect of sodium bicarbonate on properties of sisal fibre and its epoxy composites10.1016/j.compositesb.2015.09.028 ↗
22. Hybrid and nonhybrid laminate composites of sugar palm and glass fibre-reinforced polypropylene: effect of alkali and sodium bicarbonate treatments10.1155/2019/1230592 ↗
23. Possibilities for the application of agro-industrial wastes in cementitious materials: a brief review of the Brazilian perspective
24. Influence of surface modification on the microstructure and thermo-mechanical properties of bamboo fibers10.3390/ma8105327 ↗
25. Eco-friendly sodium bicarbonate treatment and its effect on epoxy and polyester coir fibre composites10.1016/j.conbuildmat.2019.03.284 ↗
26. Review on extraction, characterization, surface treatment and thermal degradation analysis of new cellulosic fibers as sustainable reinforcement in polymer composites
27. 1997
28. Characterization of natural fabric Sterculia urens10.1080/10236660802601415 ↗
29. 2009
30. 2002
31. 2010
32. Obtention and characterization of polypropylene composites reinforced with new natural fibers from Yucca aloifolia L10.1016/j.compositesb.2021.109414 ↗
33. Characterization of textile fibers by means of EGA-MS and Py-GC/MS10.1016/j.jaap.2022.105570 ↗
34. Characterisation of reduction state of cystine linkages on wool fibre surface under heterogeneous reaction conditions10.1016/j.polymertesting.2021.107438 ↗
35. Stinging nettle fibres extraction and characterization using chemical retting method and influence of tensile properties10.1016/j.indcrop.2022.115551 ↗
36. Characterization of Timoho Fiber as a reinforcement in green composite10.1016/j.jmrt.2021.05.049 ↗
37. Unveiling the impact of embedding resins on the physicochemical traits of wood cell walls with subcellular functional probing10.1016/j.compscitech.2020.108485 ↗
38. A new study on effect of various chemical treatments on Agave Americana fiber for composite reinforcement: physico-chemical, thermal, mechanical and morphological properties10.1016/j.polymertesting.2020.106437 ↗
39. Effect of alkali treatment on the properties of century fiber10.1080/15440478.2013.800812 ↗
40. A critical review of analytical methods in pretreatment of lignocelluloses: composition, imaging, and crystallinity10.1016/j.biortech.2015.11.022 ↗
41. Evaluation of hybrid-short-coir-fibre-reinforced composites via full factorial design10.1016/j.compstruct.2018.01.088 ↗
42. Effects of sodium carbonate on the performance of epoxy and polyester coir-reinforced composites10.1016/j.polymertesting.2018.03.043 ↗
43. Physico-chemical, tensile, and thermal characterization of napier grass (native african) fiber strands10.1080/1023666X.2013.784935 ↗
44. Studies on lignocellulosic fibers of Brazil. Part II: morphology and properties of Brazilian coconut fibers10.1016/j.compositesa.2007.02.004 ↗
45. Making the lignocellulosic fibers chemically compatible for composite: a comprehensive review
46. Characterization of alkali treated and untreated new cellulosic fiber from Saharan aloe vera cactus leaves10.1016/j.carbpol.2017.06.065 ↗
47. X-ray powder diffraction and other analyses of cellulose nanocrystals obtained from corn straw by chemical treatments10.1016/j.carbpol.2018.03.085 ↗
48. Structural characterization of coconut tree leaf sheath fiber reinforcement10.1007/s11676-010-0008-0 ↗
49. Mechanical properties of natural as well as synthetic fiber reinforced concrete: a review10.1016/j.conbuildmat.2022.127353 ↗
50. Surface modification of new cellulose fiber extracted from Conium maculatum plant: a comparative study10.1007/s10570-018-1797-0 ↗
51. Characterization of raw and alkali treated new natural cellulosic fibers from Tridax procumbens10.1016/j.ijbiomac.2018.12.056 ↗
52. Comprehensive characterization of raw and alkali (NaOH) treated natural fibers from Symphirema involucratum stem10.1016/j.ijbiomac.2021.07.061 ↗
53. A review on properties of fresh and hardened geopolymer mortar10.1016/j.compositesb.2018.06.031 ↗
54. Properties of ligno-cellulose fiber Hildegardia10.1002/app.10442 ↗
55. Crystal transition from cellulose I to cellulose II in NaOH treated Agave americana L. fibre10.1016/j.carbpol.2011.06.037 ↗
56. Characterization of natural cellulosic fiber extracted from Grewia damine flowering plant's stem10.1016/j.ijbiomac.2020.07.225 ↗
57. Influence of alkalinity on self-treatment process of natural fiber and properties of its geopolymeric composites10.1016/j.conbuildmat.2021.125817 ↗
58. Rheological behaviour of cement paste added with natural fibres10.1016/j.conbuildmat.2018.11.179 ↗