Thermal conductivity, microstructure and hardened characteristics of foamed concrete composite reinforced with raffia fiber
Source abstract
Abstract
Researchers have become enthralled with using natural fiber, which is a waste product from industrial processes, as an additive in cement-based materials. This is due to the fact that natural fiber is inexpensive, has principal carbon neutrality, and is obtainable in large quantities. Additionally, this fiber is made from a renewable resource. Hence it has a low density and is amenable to undergoing chemical alteration. The idea of this investigation is to discover the reactivity of raffia (raphia vinifera) fiber (RF) in low-density foamed concrete (FC). FC density of 950 kg/m3 was utilized. Workability, density, thermal conductivity, SEM analysis, compressive, bending, and tensile strengths were the parameters that were quantified and assessed. Based on the outcomes, it has been determined that the mechanical properties and thermal conductivity of FC-RF composites may be enhanced by using RF with an ideal reinforcing fraction content of 6%. Slump flow gradually decreased from 2% to 8% RF fraction content. The lowest slump flow was achieved by adding RF to the FC mixture at a fraction content of 8%. The density of FC-RF composites shows a developing tendency, likely because of the RF's comparatively high specific gravity and increasing fraction content. The addition of RF to FC considerably enhances the material's compressive, bending, and tensile strength. The optimal strength characteristics emerged when 6% RF was added to FC. Besides, the FC thermal conductivity improves as the weight percent of RF increases because the porous structure of FC with RF allows it to absorb heat.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Innovative concrete reinforcement materials · Natural Fiber Reinforced Composites · Innovations in Concrete and Construction Materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (85)
Show source-provided references
1. Potential of green construction in Malaysia: industrialised building system (IBS) vs traditional construction method10.1051/e3sconf/20140301009 ↗
2. Supply chain management (SCM): disintegration team factors in Malaysian Industrialised Building System (IBS) construction projects
3. Ismail · 2004
4. Mechanical properties and flexure behaviour of lightweight foamed concrete incorporating coir fibre10.1088/1755-1315/140/1/012140 ↗
5. Beningfield · 2005 · ume 6 · 6
6. An investigation of the effect of walnut shell as sand replacement on the performance of cement mortar subjected to elevated temperatures10.1088/1742-6596/1973/1/012034 ↗
7. Self-consolidating concretes made with cold-bonded fly ash lightweight aggregates
8. Effects of incorporating banana skin powder (BSP) and palm oil fuel ash (POFA) on mechanical properties of lightweight foamed concrete
9. The effect of recycled plastic waste polyethylene terephthalate (PET) on characteristics of cement mortar10.1088/1742-6596/1973/1/012121 ↗
10. Performance of polymer modified mortar with different dosage of polymeric modifier10.1051/matecconf/20141501039 ↗
11. Development of eco-efficient lightweight self-compacting concrete with high volume of recycled EPS waste materials10.1007/s11356-021-14213-w ↗
12. Utilization of corn cob ash as fine aggregate and ground granulated blast furnace slag as cementitious material in concrete10.3390/buildings11090422 ↗
13. Compressive strength of sustainable geopolymer concrete composites: a state-of-the-art review10.3390/su132413502 ↗
14. Compressive and flexural strength of fiber-reinforced foamed concrete: effect of fiber content, curing conditions and dry density10.1016/j.conbuildmat.2018.11.197 ↗
15. Mechanical properties of natural fiber reinforced foamed concrete10.3390/ma13143060 ↗
16. Investigation of industrialised building system performance in comparison to conventional construction method10.1051/matecconf/20141004001 ↗
17. Compressive and flexural strength of foamed concrete containing polyolefin fibers10.4028/www.scientific.net/AMR.911.489 ↗
18. Ultra-high performance of eco-friendly self-compacting concrete incorporated cement Kiln dust with/without waste plastic and polypropylene fiber10.1007/s41062-023-01058-0 ↗
19. Effect of polypropylene fiber content on flexural strength of Lightweight foamed concrete at ambient and elevated temperatures
20. Effect of combining palm oil fuel ash (POFA) and rice husk ash (RHA) as partial cement replacement to the compressive strength of concrete10.30880/ijie.2018.10.08.004 ↗
21. Effects of fibre on drying shrinkage, compressive and flexural strength of lightweight foamed concrete10.4028/www.scientific.net/AMR.587.144 ↗
22. Influence of steel fibres on strength and ductility of normal and lightweight high strength concrete10.1016/S0360-1323(01)00109-3 ↗
23. Analysis of micro-morphology, thermal conductivity, thermal diffusivity and specific heat capacity of coconut fibre reinforced foamed concrete10.1051/matecconf/20141701020 ↗
24. Fibre-reinforced foamed concretes: a review10.3390/ma13194323 ↗
25. Experimental data on compressive and flexural strengths of coir fibre reinforced foamed concrete at elevated temperatures10.1016/j.dib.2019.104320 ↗
26. Foam fiber-reinforced concrete: technology and methodology of selection of the composition10.1088/1757-899X/896/1/012072 ↗
27. Investigation of thermal, mechanical and transport properties of ultra lightweight foamed concrete (UFC) strengthened with alkali treated banana fibre10.37934/arfmts.86.1.123139 ↗
28. Influence of basalt fibre on foam concrete structure
29. Coconut fiber strengthen high performance concrete: young's modulus, ultrasonic pulse velocity and ductility properties10.14419/ijet.v7i2.23.11933 ↗
30. Shrinkage deformation of cement foam concrete10.1088/1757-899X/71/1/012019 ↗
31. The impact of a large amount of ultra-fine sunflower ash with/without polypropylene fiber on the characteristics of sustainable self-compacting concrete10.1007/s40996-022-00845-6 ↗
32. The effect of waste medical radiology as fiber reinforcement on the behavior of eco-efficient self-compacting concrete10.1007/s11356-022-19360-2 ↗
33. The behavior of sustainable self-compacting concrete reinforced with low-density waste Polyethylene fiber
34. Effect of plastic fibers on properties of foamed concrete10.30684/etj.31.7A7 ↗
35. Influence of mesocarp fibre inclusion on thermal properties of foamed concrete10.37934/arfmts.87.1.111 ↗
36. Mechanical and durability.Properties of hybrid fiber reinforced foam concrete10.1016/j.conbuildmat.2020.118373 ↗
37. Optimization of fresh and mechanical characteristics of carbon fiber-reinforced concrete composites using response surface technique10.3390/buildings13040852 ↗
38. Dynamic performance of foam concrete with recycled coir fiber10.3389/fmats.2020.567655 ↗
39. Fresh state and mechanical properties of ultra-lightweight foamed concrete incorporating alkali treated banana fibre10.11113/jurnalteknologi.v84.16892 ↗
40. 2002
41. Influence of oil palm empty fruit bunch (EFB) fibre on drying shrinkage in restrained lightweight foamed mortar10.35940/ijitee.J1080.0881019 ↗
42. Cellulose nanofibrils extracted from fique fibers as bio-based cement additive10.1016/j.jclepro.2019.06.292 ↗
43. Thermal conductivity and hardened behavior of eco-friendly concrete incorporating waste polypropylene as fine aggregate10.1016/j.matpr.2022.02.417 ↗
44. The behavior of eco-friendly self–compacting concrete partially utilized ultra-fine eggshell powder waste
45. Characterisation of natural fibres for sustainable discontinuous fibre composite materials10.3390/ma13092129 ↗
46. Impact strength of a few natural fibre reinforced cement mortar slabs: a comparative study10.1016/j.cemconcomp.2004.09.006 ↗
47. Effect of coconut fiber length and content on properties of high strength concrete10.3390/ma13051075 ↗
48. The mechanical and durability behaviour of sustainable self-compacting concrete partially contained waste plastic as fine aggregate
49. Experimental investigation of the physical and mechanical properties of sisal fiber-reinforced concrete10.3390/fib6030053 ↗
50. Degradation mechanisms of natural fiber in the matrix of cement composites10.1016/j.cemconres.2015.02.019 ↗
51. Mechanical properties and thermal conductivity of fly ash-based geopolymer foams with polypropylene fibers10.3390/app11114886 ↗
52. Thermal properties of foamed concrete with various densities and additives at ambient temperature10.4028/www.scientific.net/AMM.747.230 ↗
53. Durability properties of foamed concrete with fiber inclusion
54. Mechanical and durability properties of hybrid fiber reinforced foam concrete10.1016/j.conbuildmat.2020.118373 ↗
55. Study of flexural strength and flexural modulus of reinforced concrete beams with raffia palm fibers
56. Compressive and flexural strength of cement mortar stabilized with raffia palm fruit peel (RPEP)
57. Physical characteristics and compressive strength of raffia fibre reinforced sandcrete blocks
58. Experimental study on bagasse ash in concrete
59. 2011
60. 1980
61. 2011
62. 2019
63. 2009
64. ASTM C177; Standard test method for steady-state heat flux measurements and thermal transmission properties by means of the guarded-hot-Plate Apparatus. American Society for Testing and Materials, West Conshohocken, Pennsylvania, United States.
65. Al-Musawee · 2011
66. Ahmed · 2013
67. Thermal resistance of raffia palm reinforced concrete10.7764/RDLC.20.1.5 ↗
68. The effects of oil palm shell aggregate shape on the thermal properties and density of concrete10.4028/www.scientific.net/AMR.935.172 ↗
69. The influence of addition of treated kenaf fibre in the production and properties of fibre reinforced foamed composite10.1016/j.conbuildmat.2018.05.169 ↗
70. The mechanical strength, degree of hydration, and electrical resistivity of cement pastes modified with superabsorbent polymers10.1016/j.conbuildmat.2015.12.082 ↗
71. Interactions between superabsorbent polymers and cement-based composites incorporating colloidal silica nanoparticles10.1016/j.cemconcomp.2012.10.005 ↗
72. Tengfei · 2017
73. Influence of bottom ash and polypropylene fibers on the physico-mechanical, durability and thermal performance of foam concrete: an experimental investigation10.1016/j.conbuildmat.2021.124887 ↗
74. Optimization of flexural strength of raffia palm- fibre cement composites
75. Mechanical, thermal, durability and microstructural behavior of hybrid waste-modified green reactive powder concrete10.1016/j.conbuildmat.2022.128184 ↗
76. New waste-based composite material for construction applications10.3390/ma14206079 ↗
77. The use of raffia palm (raffia hookeri) piassava fibre as reinforcement of concrete
78. Effect of cellulose nanofibrils and nanocrystals on physical properties of concrete10.1016/j.conbuildmat.2019.06.145 ↗
79. Nanofibrillated cellulose and cellulosic pulp for reinforcement of the extruded cement based materials10.1016/j.conbuildmat.2017.11.066 ↗
80. Experimental and empirical evaluation of strength for sustainable lightweight self-compacting concrete by recycling high volume of industrial waste materials10.1080/19648189.2021.1997827 ↗
81. Experimental study on mechanical and thermal behavior of foamed concrete10.1016/j.matpr.2017.12.302 ↗
82. Investigation of the high temperature properties of lightweight foamed concrete under incremental amplitude cyclic triaxial compression
83. Mechanical, durability and thermal properties of foamed concrete reinforced with synthetic twisted bundle macro-fibers10.3389/fmats.2023.1158675 ↗
84. Preparation and characterization of high porosity cement-based foam material10.1016/j.conbuildmat.2015.05.032 ↗
85. Effects of bentonite slurry on air-void structure and properties of foamed concrete10.1016/j.conbuildmat.2018.05.226 ↗