Evolutions of the microstructures and mechanical properties of TC18 titanium alloy processed by hot-rolling in β single-phase region
Source abstract
Abstract
In this study, hot rolling treatment followed by water quenching was conducted on a TC18 titanium alloy in β single-phase region with varying reductions. Experimental evidences from X-ray diffraction and transmission electron microscopy indicate the formation of α phase, induced by sufficient stress and assisted by ω phase. In addition, the existence of α" phase and diffuse streaks were also observed during the hot working processing. Furthermore, dynamic recrystallization (DRX) including continuous dynamic recrystallization (CDRX) and discontinuous dynamic recrystallization (DDRX) was proved to exist in the hot rolling process. During the whole DRX process, with increasing the deformation degree, recrystallized grains nucleated preferentially at high-energy areas such as grain boundaries and shear bands, then accumulated and grew until achieving a complete recrystallization state. It should be noted that DDRX mainly occurred at the grain boundaries, while CDRX grains nucleated within the shear bands. The elongation gradually decreased and tensile strength gradually increased with the increment of the deformation degree.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Titanium Alloys Microstructure and Properties · Metallurgy and Material Forming · Hydrogen embrittlement and corrosion behaviors in metals
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (44)
Show source-provided references
1. Oxidation mechanism of a near β-Ti alloy10.1016/j.matdes.2022.111144 ↗
2. Achieving superior mechanical properties in electron beam welded joints of Ti-5Al-5Mo-5V-1Cr-1Fe alloy thick plate using novel annealing treatments10.1016/j.matchar.2022.112548 ↗
3. Effect of weld repair on microstructure and mechanical properties of laser additive manufactured Ti-55511 alloy10.1016/j.matdes.2017.01.054 ↗
4. Research on hot deformation behavior of Ti-5Al-5Mo-5V-1Cr-1Fe alloy10.1016/j.matdes.2014.12.021 ↗
5. High-temperature deformation behavior and recrystallization mechanism of a near beta titanium alloy Ti-55511 in β phase region10.1016/j.msea.2022.143335 ↗
6. Spheroidization and dynamic recrystallization mechanisms of Ti-55511 alloy with bimodal microstructures during hot compression in alpha plus beta region10.1016/j.msea.2020.139282 ↗
7. Precipitation behaviors and orientation evolution mechanisms of alpha phases in Ti-55511 titanium alloy during heat treatment and subsequent hot deformation10.1016/j.matchar.2020.110471 ↗
8. A dislocation density-based model and processing maps of Ti-55511 alloy with bimodal microstructures during hot compression in alpha plus beta region10.1016/j.msea.2020.139692 ↗
9. Microstructure evolution and a unified constitutive model for a Ti-55511 alloy deformed in β region10.1016/j.jallcom.2021.159534 ↗
10. Nucleation and growth of α phase in a metastable β-Titanium Ti-5Al-5Mo-5V-3Cr alloy: influence from the nano-scale, ordered-orthorhombic O″ phase and α compositional evolution10.1016/j.scriptamat.2020.113672 ↗
11. A study of epitaxial growth behaviors of equiaxed alpha phase at different cooling rates in near alpha titanium alloy10.1016/j.actamat.2016.10.012 ↗
12. Grain boundary segregation and its implications regarding the formation of the grain boundary α phase in the metastable β-Titanium Ti–5Al–5Mo–5V–3Cr alloy10.1016/j.scriptamat.2021.114320 ↗
13. Crystallography and reorientation mechanism upon deformation in the martensite of an α-α' Ti-6Al-4V dual-phase microstructure exhibiting high work-hardening rate10.1016/j.actamat.2020.116530 ↗
14. Twinning-induced plasticity mechanism of α″-martensitic titanium alloy10.1016/j.actamat.2023.118763 ↗
15. New dislocation dissociation accompanied by anti-phase shuffling in the α″ martensite phase of a Ti alloy10.1016/j.actamat.2022.117705 ↗
16. A novel sequential mechanism associated with stress-induced β→ω→β+α phase transformation in Ti–6Mo-3.5Cr–1Zr titanium alloy10.1016/j.msea.2022.143355 ↗
17. ω-Assisted refinement of α phase and its effect on the tensile properties of a near β titanium alloy
18. ω-Assisted α nucleation in a metastable β titanium alloy10.1016/j.scriptamat.2019.06.020 ↗
19. Enhanced mechanical properties in metastable β titanium alloy via ω-assisted nucleation10.1016/j.msea.2022.144082 ↗
20. New insights into the phase transformations to isothermal ω and ω-assisted α in near β-Ti alloys10.1016/j.actamat.2015.12.046 ↗
21. Materials information and mechanical response of TRIP/TWIP Ti alloys10.1038/s41524-021-00560-2 ↗
22. A strengthening strategy for metastable β titanium alloys: synergy effect of primary α phase and β phase stability10.1016/j.msea.2022.143736 ↗
23. A new titanium alloy with a combination of high strength, high strain hardening and improved ductility10.1016/j.scriptamat.2014.09.005 ↗
24. Multi-scale characterization of deformation features and precipitation behavior in a near β-Ti alloy10.1016/j.matchar.2020.110637 ↗
25. Charpy impact behaviors of metastable β-Ti alloys: transformation induce plasticity versus twining induce plasticity10.1016/j.msea.2023.144753 ↗
26. Strain rate dependence of deformation-induced transformation and twinning in a metastable titanium alloy10.1016/j.actamat.2015.11.026 ↗
27. A review of microstructure and texture evolution during plastic deformation and heat treatment of β-Ti alloys10.1016/j.jallcom.2021.163242 ↗
28. Microstructural evolution in adiabatic shear bands in Ta and Ta–W alloys10.1016/S1359-6454(01)00215-4 ↗
29. Microstructure of adiabatic shear bands in Ti6Al4V10.1016/j.matchar.2012.10.009 ↗
30. Shear localization and microstructure in coarse grained beta titanium alloy10.1016/j.msea.2015.11.102 ↗
31. Phase transformation and dynamic recrystallization behaviors in a Ti55511 titanium alloy during hot compression10.1016/j.jallcom.2019.04.319 ↗
32. The identification of dynamic recrystallization and constitutive modeling during hot deformation of Ti55511 titanium alloy10.1016/j.matdes.2015.06.093 ↗
33. Dynamic recrystallization of titanium: effect of pre-activated twinning at cryogenic temperature10.1016/j.actamat.2018.05.057 ↗
34. Hot pack rolling nearly lamellar Ti-44Al-8Nb-(W, B, Y) alloy with different rolling reductions: lamellar colonies evolution and tensile properties10.1016/j.matdes.2017.02.053 ↗
35. Mechanism in the β phase evolution during hot deformation of Ti–5Al–2Sn–2Zr–4Mo–4Cr with a transformed microstructure10.1016/j.actamat.2015.04.045 ↗
36. Evolution of microstructure and shear-band formation in α-hcp titanium10.1016/0167-6636(94)90058-2 ↗
37. New developments in geometric dynamic recrystallization[J]10.1016/j.msea.2005.08.052 ↗
38. The effect of precursory α and ω phase on microstructure evolution and tensile properties of metastable β titanium alloy10.1016/j.jmrt.2021.12.066 ↗
39. ω precipitation: deformation regulator in metastable titanium alloys
40. Evidence for strain glass in the ferroelastic-martensitic system Ti(50-x)Ni(50+x)10.1103/PhysRevLett.95.205702 ↗
41. ω Transformation in cold-worked Ti–Nb–Ta–Zr–O alloys with low body-centered cubic phase stability and its correlation with their elastic properties10.1016/j.actamat.2012.09.041 ↗
42. Elastic softening and electron-diffraction anomalies prior to the martensitic transformation in a NiAl-β alloy10.1016/0036-9748(76)90205-2 ↗
43. Diffuse electron scattering in β-phase alloys10.1007/BF02652212 ↗
44. Displacive precursor phenomena in Ti–22Al–27Nb intermetallic compound prior to diffusional transformation10.1016/S1359-6454(01)00288-9 ↗