Generation and distribution mechanism of welding-induced residual stresses
Source abstract
Abstract
Welding-induced residual stresses (WIRS) can have influence on the performance and service life of the welded structures. The present study experimentally and numerically investigates the reason and mechanism behind the generation and distribution of WIRS concretely. The results show that the thermal shrinkage process and phase transformation process are the main sources generating welding-induced longitudinal residual stress (σLRS). Nevertheless, except for these two processes, the quenching process would be another source producing transverse residual stress (σTRS). In the current work, it is found that the maximum σLRS generally reaches the yield strength (σy) of base metal (BM) at ambient temperature (TRT) for both transforming and non-transforming materials but located at different areas. In the single-pass weldments without external restraint, σTRS profile on the top surface is usually always M-shaped for the non-transforming materials but W-shaped instead for the transforming materials. The distribution mechanism behind the M-shaped or W-shaped σTRS profile is systematically clarified here.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Welding Techniques and Residual Stresses · Advanced Welding Techniques Analysis · Fatigue and fracture mechanics
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (46)
Show source-provided references
1. Cornu · 1988
2. Kou · 2003
3. Radaj · 1992
4. Ueda · 2012
5. Bate · 1997
6. Residual stress. Part 1 – measurement techniques10.1179/026708301101509980 ↗
7. Determination of hydrogen input in welded joints of press-hardened 22MnB5 steel10.1007/s40194-014-0119-x ↗
8. Mallick · 2010
9. Development of gas shielded arc welding process to achieve a very low diffusible hydrogen content in weld metals10.1007/s40194-016-0305-0 ↗
10. Origin, measurements and evaluation of residual stresses
11. Masubuchi · 1980
12. Transient thermal stresses of weld heat-affected zone by both-ends-fixed bar analogy
13. Lindgren · 2007
14. Feng · 2005
15. Influence of transformation induced plasticity on simulated results of welding residual stress in low temperature transformation steel10.1016/j.commatsci.2013.05.023 ↗
16. Residual stresses in welded joints – sources and consequences10.4028/www.scientific.net/MSF.404-407.215 ↗
17. Residual stress. Part 2 – nature and origins10.1179/026708301101510087 ↗
18. Calculation of internal stress of steel induced during quenching10.2355/isijinternational1966.12.6 ↗
19. Resdiual stresses after quenching
20. Prediction of residual stresses due to heat treatment
21. Dimensional alterations of parts due to heat treatment
22. Practical examination of the welding residual stress in view of low-carbon steel welds10.1016/j.jmrt.2020.01.004 ↗
23. Near- and far-field approximation for analyzing flame heating and welding10.1080/01495739008927021 ↗
24. Mandal · 2017
25. Pasquale · 2001
26. 2016
27. Influence of temperature- and phase-dependent yield strength on residual stresses in ultra-high strength steel S960 weldments10.1016/j.jmrt.2021.09.050 ↗
28. Schajer · 2013
29. Goldak · 2005
30. Bhadeshia · 2006
31. Michaleris · 2011
32. A new kinetic model for anisothermal metallurgical transformations in steel including effect of austenite grain size10.1016/0001-6160(84)90211-6 ↗
33. Theoretical and numerical approach to the plastic behavior of steels during phase transformation-I. Derivation of general relations10.1016/0022-5096(86)90009-8 ↗
34. Theoretical and numerical approach to the plastic behavior of steels during phase transformation-II. Study of classical plasticity for ideal-plastic phases10.1016/0022-5096(86)90010-4 ↗
35. A general equation prescribing the extent of the austenite-martensite transformation in pure iron-carbon alloys and plain carbon steels10.1016/0001-6160(59)90170-1 ↗
36. Finite element simulation of welding distortions in ultra-high strength steel S960MC including comprehensive thermal and solid-state phase transformation models10.1016/j.engstruct.2020.110804 ↗
37. Material hardening model effects on the calculated welding residual stresses in ultra-high strength steel S96010.1016/j.jmrt.2023.03.016 ↗
38. Limitations and recommendations for the measurement of residual stresses in welded joints10.21741/9781945291890-35 ↗
39. Welding residual stresses in thick steel plates - MAG-welded at low ambient temperature10.1007/s40194-015-0234-3 ↗
40. An experimental comparison of weld-induced residual stresses using different stainless steel filler metals commonly used for hydraulic turbines manufacturing and repair
41. Influence of restraint conditions on welding residual stresses in H-type cracking test specimens10.3390/ma12172700 ↗
42. Comparison of residual stress induced by TIG and LBW in girth weld of AISI 304 stainless steel pipes10.1016/j.jmatprotec.2017.05.014 ↗
43. Numerical simulation and experiment analysis of angular distortion and residual stress in hybrid laser-magnetic welding10.1016/j.jmatprotec.2017.02.031 ↗
44. Numerical and experimental investigation on microstructure and residual stress of multi-pass hybrid laser-arc welded 316L steel10.1016/j.matdes.2019.107653 ↗
45. Effects of finish turning on an austenitic weld investigated using diffraction methods10.1007/s00170-020-05386-8 ↗
46. Eigenspannungen in schweißnahten