Electrochemical corrosion behavior of 7075 aluminum alloy with different ultrasonic surface rolling microstructures
Source abstract
Abstract
7075 Al alloy is strengthened by ultrasonic surface rolling process (USRP), and the process parameters are changed to regulate the microstructure. The thickness, grain size and distribution of different strengthening layer are characterized in detail by scanning electron microscopy (SEM) and transmission electron microscopy (TEM). The influence of different strengthening structures on their electrochemical corrosion behavior are studied using scanning Kelvin probe (SKP) and electrochemical impedance spectroscopy (EIS). The results show that the average grain size of untreated Al alloy is 2.89 μm, the surface SKP potential is low and fluctuates greatly, and has high sensitivity to pitting corrosion. After USRP treatment, the surface roughness of 7075 Al alloy decreases, the grain size is significantly refined and shows a gradient distribution, SKP potential in the strengthening area increases and becomes more stable, the passive film on the surface thickens, the density of pits significantly decreases, and the corrosion resistance is improved. Besides, the samples with thicker plastic deformation layer and surface nanocrystallization (average size of 39.9 nm) exhibit better performance compared to other samples.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Surface Treatment and Residual Stress · Aluminum Alloy Microstructure Properties · Microstructure and mechanical properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (57)
Show source-provided references
1. Recent developments in advanced aircraft aluminium alloys10.1016/j.matdes.2013.12.002 ↗
2. Recent development in aluminum alloys for aerospace applications10.1016/S0921-5093(99)00674-7 ↗
3. Orthogonal impact load in 6061-T651 and 7075-T651 aluminum alloy plates10.1016/j.jmrt.2023.08.174 ↗
4. Effect of cooling aging on microstructure and mechanical properties of an Al-Zn-Mg-Cu alloy10.1016/j.matdes.2013.12.024 ↗
5. Study the effect of pre-corrosion on mechanical properties and fatigue life of aluminum alloy 801110.1016/j.matpr.2019.07.375 ↗
6. Effect of coastal atmospheric corrosion on fatigue properties of 2024-T4 aluminum alloy structures10.1016/j.jallcom.2019.06.235 ↗
7. Growth characteristics of stress corrosion cracking in high-strength 7075 aluminum alloy in sodium chloride solutions10.1016/j.engfracmech.2023.109657 ↗
8. Enhanced fatigue performance of aluminum alloy through surface strengthening treatment10.1016/j.matlet.2021.130864 ↗
9. Influence of different shot peening treatments on surface state and fatigue behaviour of Al 6063 alloy10.1016/j.engfracmech.2017.03.017 ↗
10. A comparison of AA2024 and AA7150 subjected to ultrasonic shot peening: microstructure, surface segregation and corrosion10.1016/j.surfcoat.2018.01.072 ↗
11. Enhancement in microstructural and mechanical performance of AA7075 aluminum alloy via severe shot peening and ultrasonic nanocrystal surface modification10.1016/j.apsusc.2020.146922 ↗
12. Effect of ultrasonic nano-crystalline surface modification on the microstructural evolution and mechanical properties of Al5052 alloy10.1002/sia.4959 ↗
13. Influence of ultrasonic surface rolling on fatigue behavior of 2D12 aluminum alloy
14. Effect of spindle speed during ultrasonic rolling on surface integrity and fatigue performance of Ti6Al4V alloy10.1016/j.ijfatigue.2022.106794 ↗
15. Fretting fatigue characteristics of Ti-6Al-4V alloy with a gradient nanostructured surface layer induced by ultrasonic surface rolling process10.1016/j.ijfatigue.2019.03.042 ↗
16. Study on surface characteristics of 7050- T7451 aluminum alloy by ultrasonic surface rolling process10.1007/s00170-016-8659-4 ↗
17. Mechanical and corrosion fatigue behaviors of gradient structured 7B50-T7751 aluminum alloy processed via ultrasonic surface rolling10.1016/j.jmst.2019.08.030 ↗
18. Enhanced plasticity and corrosion resistance of high strength Al-Zn-Mg-Cu alloy processed by an improved thermomechanical processing10.1016/j.jallcom.2017.05.047 ↗
19. Research progress of the effect of surface nanocrystallization on the electrochemical corrosion of titanium alloys
20. Electrochemical corrosion behavior of surface nanocrystallized steel and aluminum alloys by air blast shot peening (ABSP)
21. Electrochemical corrosion behavior of nanocrystallized materials: growth of passive film and local pitting corrosion
22. Effect of hybrid surface nanocrystallization on the electrochemical corrosion behavior in 2A14 aluminum alloy
23. Effects of ultrasonic surface rolling on the localized corrosion behavior of 7B50-T7751 aluminum alloy10.3390/ma13030738 ↗
24. Localized corrosion behaviour of AA7150 after ultrasonic shot peening: corrosion depth vs. impact energy10.1016/j.corsci.2017.11.008 ↗
25. Corrosion behavior and mechanism of Al-Zn-Mg-Cu alloy based on the characterization of the secondary phases10.1016/j.matchar.2022.111974 ↗
26. Achieving excellent corrosion resistance properties of 7075 Al alloy via ultrasonic surface rolling treatment10.1016/j.jallcom.2022.165009 ↗
27. Effect of retrogression and reaging treatment on the microstructure and fatigue crack growth behavior of 7050 aluminum alloy thick plate10.1016/j.matdes.2013.09.063 ↗
28. Surface rolling deformed severity-dependent fatigue mechanism of Ti-6Al-4V alloy10.1016/j.ijfatigue.2022.106732 ↗
29. XPS measurement of thickness of oxide layer on aluminum foils
30. Initial formation of corrosion products on pure zinc and MgZn2 examinated by XPS10.1016/j.corsci.2013.10.029 ↗
31. Effect of multi-pass ulstrasonic surface rolling on the mechanical and fatigue properties of HIP Ti-6Al-4V alloy10.3390/ma10020133 ↗
32. Effects of ultrasonic surface rolling parameters on surface integrity of TC17 alloy10.1007/s11665-019-04418-z ↗
33. Face-centered titanium induced by ultrasonic surface rolling process in Ti-6Al-4V alloy and its tensile behavior10.1016/j.matchar.2018.09.004 ↗
34. Determination of optimal ultrasonic surface rolling parameters to enhance the fatigue strength of railway axle EA4T steel
35. Grain refinement mechanism under high strain-rate deformation in machined surface during high speed machining Ti6Al4V10.1016/j.msea.2019.03.011 ↗
36. Microstructural evolution mechanisms in rolled 17-4PH steel processed by ultrasonic surface rolling process10.1016/j.msea.2019.138720 ↗
37. Effects of boric acid on microstructure and corrosion resistance of boric/sulfuric acid anodic film on 7050 aluminum alloy10.1016/S1003-6326(11)61369-1 ↗
38. Sealing of anodized alumium with phytic acid solution10.1016/j.surfcoat.2015.12.024 ↗
39. SVET, SKP and EIS study of the corrosion behaviour of high strength Al and Al-Li alloys used in aircraft fabrication10.1016/j.corsci.2014.03.001 ↗
40. Effect of repeated processing passes during ultrasonic rolling on fatigue performance and corrosion resistance of Ti6Al4V alloy10.3390/met13101719 ↗
41. On the estimation of standard adsorption free energy from corrosion inhibition efficiencies10.1016/j.corsci.2023.111139 ↗
42. Microstructure and corrosion behavior of 2A12 aluminum alloys by high frequency impacting and rooling10.1016/j.cirpj.2023.01.001 ↗
43. Corrosion behavior of the reinforcement in chloride-contaminated alkali-activated fly ash pore solution10.1016/j.compositesb.2021.109215 ↗
44. Influence of surface nanocrystallization of 20CrMnTi on behavior of localized corrosion by ultrasonic surface rolling processing
45. Electrochemical evaluation of the corrosion behaviour of API-X100 pipeline steel in aerated bicarbonate solutions10.1016/j.corsci.2012.01.015 ↗
46. Relationship between dissolved oxygen and corrosion characterization of X80 steel in acidic soil simulated solution10.1016/S1452-3981(23)06631-2 ↗
47. Pitting corrosion of naturally aged AA 7075 aluminum alloys with bimodal grain size10.1016/j.corsci.2016.09.013 ↗
48. Passive film properties of bimodal grain size AA7075 aluminium alloy prepared by spark plasma sintering10.3390/ma13143236 ↗
49. Shot peening effects on corrosion behavior of commercial pure titanium in body simulating solution10.1088/2053-1591/ab49a6 ↗
50. Surface nanocrystallization induced by ultrasonic shot peening and its effect on corrosion resistance of Ti–6Al–4V alloy10.1007/s12666-018-1531-5 ↗
51. Revealing the relationship between grain size and corrosion rate of metals10.1016/j.scriptamat.2010.08.035 ↗
52. Improving the intergranular corrosion resistance of 304 stainless steel by grain boundary network control10.1016/j.corsci.2011.02.005 ↗
53. Effect of grain size on corrosion of high purity aluminium10.1016/j.electacta.2010.09.023 ↗
54. Effects of applied potential on stable pitting of 304 stainless steel10.1016/j.corsci.2015.01.034 ↗
55. A study of the corrosion of aluminum alloy 2024-T3 under thin electrolyte layers10.1016/j.corsci.2003.10.005 ↗
56. EIS study of potentiostatically formed passive film on 304 stainless steel10.1016/j.electacta.2011.07.072 ↗
57. In-situ investigation of atmospheric corrosion behavior of bronze under thin electrolyte layers using electrochemical technique10.1016/S1003-6326(11)61311-3 ↗