Cooling rate evaluation during solidification in the suction casting process
Source abstract
Abstract
In this work, axial cooling rates during solidification in the Fe-25Ni (wt.%) suction-cast alloy were evaluated based on cellular spacing measurements. Good agreement of the experimental results with the 20/{d(cm)}2 relationship was observed for the standard water-cooling system temperature of 17 ± 1 °C. The importance of this casting parameter is reported for the first time. A linear decrease in the cooling rate with increasing water-cooling system temperature is demonstrated and at least 20% lower values are expected for a temperature increase by 10 °C compared to standard conditions. Furthermore, the cooling rate exponentially decreases with increasing rod diameter for all water-cooling system temperatures. A new expression for cooling rates during solidification, taking into account the casting parameter (WCST expressed in K), i.e. CR=10-0.0059⋅WCST+4.9746{d(mm)}0.0195⋅WCST-3.6351, is proposed. The reliability and benefits of this formula have been demonstrated by casting the Zr50Cu40Al10 glass-forming alloy at various water-cooling system temperatures.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Metallic Glasses and Amorphous Alloys · High Entropy Alloys Studies · Solidification and crystal growth phenomena
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (17)
Show source-provided references
1. Mechanical properties and fracture analysis of AlCu4MgSi alloy ingots obtained by horizontal continuous casting10.24425/amm.2019.126225 ↗
2. Effect of cooling rate on microstructure, microsegregation and mechanical properties of cast Ni-based superalloy K417G10.1016/j.jmst.2017.03.023 ↗
3. Effect of high-temperature exposure on the microstructure and mechanical properties of the Al5Ti5Co35Ni35Fe20 high-entropy alloy10.1016/j.jmrt.2019.10.084 ↗
4. Non-crystalline structure in solidified gold–silicon alloys10.1038/187869b0 ↗
5. 2008
6. Recent development and application products of bulk glassy alloys10.1016/j.actamat.2010.11.027 ↗
7. Metallic glass matrix composites10.1016/j.mser.2015.12.001 ↗
8. Formation of Ti–Zr–Cu–Ni bulk metallic glasses10.1063/1.360537 ↗
9. Rapid solidification and bulk metallic glasses — processing and properties
10. A study of cooling process in bulk metallic glasses fabrication10.1063/1.4935440 ↗
11. Influence of casting parameters on the critical casting size of bulk metallic glass10.1007/s11661-009-9929-7 ↗
12. Comparative study between two die cast methods for processing Cu–Zr–Al bulk metallic glasses10.1016/j.jmrt.2013.01.002 ↗
13. Jones · 1982
14. Investigation of the cooling rate in the suction casting process
15. Porter · 2009
16. Estimation of cooling rates in suction casting and copper-mould casting processes10.1515/amm-2015-0204 ↗
17. Glass forming ability of the Zr50Cu40Al10 alloy with two oxygen levels10.1016/j.jnoncrysol.2018.05.034 ↗