Dependence of strength and ductility on secondary α phase in a novel metastable-β titanium alloy
Source abstract
Abstract
As a novel metastable β titanium alloy, Ti-6Mo-5V-3Al-2Fe, it is essential to establish the correlation among its microstructure, strength and ductility. In this paper, transmission electron microscope (TEM) and scanning electron microscope (SEM) were used to observe the secondary α phase (αs) of the aged alloy. The strength and ductility of the alloy were characterized by a room temperature tensile test. The dependence of strength and ductility on the αs of the alloy was investigated. Results indicate that the minimum width and spacing of αs within β grains can be obtained after being aged at 470°C for 4h. As the increase of aging temperature and time, the average width and average spacing of αs increase. A relational equation among precipitation strengthening and spacing length of αs is established to analyze the strengthening mechanism. It is demonstrated that the average spacing length of αs plays a predominant role in the strengthening of the alloy. The aged alloy exhibits poor ductility due to the formation of continuous grain boundaries α phase (GB α). After being aged at 620°C for 4h, Widmansta¨tten α phase nucleates along β grain boundaries and grows toward β matrix (WGB α). The combination of αs spacing widening and WGB α formation obviously improves the ductility of the alloy.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Titanium Alloys Microstructure and Properties · Intermetallics and Advanced Alloy Properties · Advanced materials and composites
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (27)
Show source-provided references
1. Microplasticity behavior study of equiaxed near-β titanium alloy under high-cycle fatigue loading: crystal plasticity simulations and experiments10.1016/j.jmrt.2019.10.009 ↗
2. Deformation mechanism of fine structure and its quantitative relationship with quasi-static mechanical properties in near β-type Ti-4.5Mo-5.1Al-1.8Zr-1.1Sn-2.5Cr-2.9Zn alloy10.1016/j.pnsc.2021.09.001 ↗
3. Titanium alloys for aerospace applications10.1002/adem.200310095 ↗
4. Microstructure and mechanical properties of Ti-Mo-Nb alloys designed using the cluster-plus-glue-atom model for orthopedic applications10.1007/s00170-021-07308-8 ↗
5. Microstructure and mechanical property correlation and property optimization of a near β titanium alloy Ti-733310.1016/j.jallcom.2016.04.303 ↗
6. Building a continuous cooling transformation diagram of β-CEZ alloy by metallography and electrical resistivity measurements10.1007/s11661-997-0004-y ↗
7. The effect of solution heat treatment temperature on phase transformations, microstructure and properties of Ti-25Ta-xZr alloys used as a biomaterial10.1007/s11665-020-04770-5 ↗
8. Effect of solution treatment and aging on microstructure and tensile properties of high strength β titanium alloy, Ti-5Al-5V-5Mo-3Cr10.1016/j.matdes.2014.04.015 ↗
9. Microstructural evolution, mechanical properties and fracture toughness of near β titanium alloy during different solution plus aging heat treatments10.1016/j.jallcom.2019.07.134 ↗
10. Microstructural tailoring and mechanical properties of a multi-alloyed near β titanium alloy Ti-5321 with various heat treatment10.1016/j.msea.2017.11.029 ↗
11. Design of high strength titanium alloy through finding a critical composition with ultra-fine α phase
12. Effect of heat treatment on the microstructure and mechanical properties of high-strength Ti-6Al-4V-5Fe alloy10.2320/matertrans.M2018267 ↗
13. Microstructure, texture, and mechanical properties of β solution-treated and aged metastable β titanium alloy, Ti-5Al-5Mo-5V-3Cr10.1007/s11661-017-4217-4 ↗
14. Effect of heat treatment variations on the microstructure evolution and mechanical properties in a β metastable Ti alloy10.1016/j.jallcom.2016.05.225 ↗
15. The effect of heat treatment on the microstructure and mechanical properties of the novel low-cost Ti-3Al-5Mo-4Cr-2Zr-1Fe alloy10.3390/ma13173798 ↗
16. Effect of solution plus aging heat treatment on microstructural evolution and mechanical properties of near-β titanium alloy10.1016/S1003-6326(19)65008-9 ↗
17. Enhanced mechanical properties of Ti-5Al-5Mo-5V-3Cr-1Zr by bimodal lamellar precipitate microstructures via two-step aging10.1016/j.msea.2021.142117 ↗
18. Correlation between solution treatment temperature, microstructure, and yield strength of forged Ti-17 alloys10.3390/cryst11060625 ↗
19. Evolution of secondary α phase during aging treatment in novel near β Ti-6Mo-5V-3Al-2Fe alloy10.3390/ma11112283 ↗
20. Effect of heat treatments on microstructure and property of a high strength/toughness Ti-8V-1.5Mo-2Fe-3Al alloy10.1016/j.msea.2014.08.025 ↗
21. Effect of hot rolling and heat treatment on microstructure and tensile properties of high strength β titanium alloy sheets10.1016/j.msea.2015.02.030 ↗
22. Effect of prestrain and aging treatment on microstructures and tensile properties of Ti-10Mo-8V-1Fe-3.5Al alloy10.1016/j.msea.2009.09.046 ↗
23. The influence of partitioning on the growth of intragranular a in near-β Ti alloys10.1016/j.jallcom.2015.04.143 ↗
24. Phase precipitation behavior during isothermal deformation in β-quenched near β titanium alloy Ti-733310.1016/j.jallcom.2016.02.102 ↗
25. Microstructural dependence of strength and ductility in a novel high strength β titanium alloy with Bi-modal structure10.1016/j.msea.2019.138086 ↗
26. Low-cycle fatigue behavior of Ti-6Mo-5V-3Al-2Fe alloy with various types of secondary α phase
27. Powder metallurgy of Al-based metal matrix composites reinforced with β-Al3Mg2 intermetallic particles: analysis and modeling of mechanical properties10.1016/j.actamat.2009.06.017 ↗