journal article·2022-07Open access

Study on microsegregation and homogenization process of a novel nickel-based wrought superalloy

Yushuo Li, Yanwu Dong, Zhouhua Jiang, Kean Yao, Shuyang Du, Yuxiao Liu, Zhiwen Hou

Abstract

In this paper, the as-cast microstructure, microsegregation, precipitates and suitable homogenization process of a novel Ni-based wrought superalloy prepared by vacuum induction melting (VIM) + vacuum arc remelting (VAR) were investigated by optical microscope (OM), scanning electron microscope (SEM), electron probe microanalysis (EPMA), differential scanning calorimetry (DSC), high temperature confocal laser scanning microscope (HT-CLSM) and thermal simulation compression. The results show that severe element segregation exists in the ingot. Nb, Ti and Al are mainly segregated in the interdendritic region, while W is mainly segregated in the dendrite arm. The precipitates in the alloy mainly include non-uniform γ′ strengthening phase, coarse (γ + γ′) eutectic phase and MC carbide, among which, the redissolution temperature range of γ′ phase is 1060–1220 °C; the (γ + γ′) eutectic phase can be redissolved obviously above 1180 °C but melted into liquid at 1250 °C; the redissolution temperature range of MC carbide is 1349–1358 °C, exceeding the solidus temperature of the alloy. After homogenization at 1220 °C/10 h, all the γ′ phase and most of the (γ + γ′) eutectic phase can be redissolved, and the element segregation can be significantly alleviated, moreover, the hot deformation resistance of the alloy is lower and the dynamic recrystallization (DRX) degree is higher, indicating that 1220 °C/10 h is an ideal single-stage homogenization process.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: High Temperature Alloys and Creep · Additive Manufacturing Materials and Processes · Microstructure and Mechanical Properties of Steels

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (48)

Show source-provided references
1. Research on novel cast and wrought superalloy FGH4096 for aircraft turbine disk applications
2. Mechanism of high-temperature oxidation effects in fatigue crack propagation and fracture mode for FGH97 superalloy10.1007/s12598-018-1123-x ↗
3. Microstructure control and mechanical properties of the newest nickel-based wrought superalloy GH4065A
4. Effects of temperature and rare earth content on oxidation resistance of Ni-based superalloy10.1016/S1002-0071(12)60035-5 ↗
5. Microstructure evolution and mechanical properties of a new cast Ni-base superalloy with various Ti contents10.1016/j.jallcom.2017.11.074 ↗
6. As-cast microstructure characteristic and homogenization of a newly developed hard-deformed Ni-based superalloy GH4975
7. Effect of grain boundary misorientation on η phase precipitation in Ni-base superalloy 718Plus10.1016/j.matchar.2019.02.038 ↗
8. Precipitation and phase transformation mechanism of additive manufactured Ni-Co base superalloy10.1016/j.matchar.2019.03.015 ↗
9. Microstructure and mechanical behaviour of an advanced powder metallurgy nickel base superalloy processed through hot isostatic pressing route for aerospace applications
10. Influence of double aging heat treatment on phase transformation and dimensional accuracy of inconel 718 alloy made through laser-based additive manufacturing10.1007/s12666-021-02374-8 ↗
11. Microsegregation of a new Ni-Co-based superalloy prepared through electron beam smelting and its homogenization treatment10.1016/j.jmrt.2020.03.068 ↗
12. Element segregation and solidification behavior of a Nb, Ti, Al Co-strengthened superalloy ЭК15110.1007/s40195-019-00894-3 ↗
13. Role of carbides on hot deformation behavior and dynamic recrystallization of hard-deformed superalloy U720Li10.1016/j.msea.2021.141293 ↗
14. An optimization method of upsetting process for homogenized, nickel-based superalloy Udimet 720Li ingot considering both cracking and recrystallization10.1016/j.jmatprotec.2019.01.013 ↗
15. Five decades of the zener equation10.2355/isijinternational.38.913 ↗
17. On incipient melting during high temperature heat treatment of cast Inconel 738 superalloy10.1023/B:JMSC.0000048761.32712.eb ↗
18. Cracking mechanism in as-cast GH4151 superalloy ingot with high γ′; phase content10.1016/S1003-6326(20)65413-9 ↗
19. Multiphase-field simulation of the solution heat treatment process in a Ni-based superalloy10.1016/j.commatsci.2021.110550 ↗
20. Lza · 2021
21. Microstructure and homogenization process of as-cast GH4169D alloy for novel turbine disk10.1007/s12613-019-1802-0 ↗
22. Incipient melting phase and its dissolution kinetics for a new superalloy10.1016/S1003-6326(20)65364-X ↗
23. Microstructural characterization of Ni-base superalloy as-cast single crystal (CMSX-4)10.1007/s40962-020-00496-1 ↗
24. Solidification and segregation behaviors of superalloy IN718 at a slow cooling ratess10.3390/ma11122398 ↗
25. Effects of homogenization treatment on the microsegregation of a Ni–Co based superalloy produced by directional solidification10.1007/s40195-021-01192-7 ↗
26. Homogenization behavior of IN 718 superalloy prepared by electron beam layered solidification technology10.1016/j.jmrt.2021.05.109 ↗
27. Quantitative analysis of homogenization treatment of INCONEL718 superalloy10.1016/S1003-6326(11)60814-5 ↗
28. Revisiting the diffusion of niobium in an as-cast nickel-based superalloy during annealing at elevated temperatures10.1007/s12540-019-00342-y ↗
29. Flemings · 1974 · vol. 75 · 219
30. Glicksman · 2000 · 54
31. Interdiffusion of the platinum-group metals in nickel at elevated temperatures10.1016/S1359-6454(03)00105-8 ↗
32. Comparison of the diffusion of some substitution elements in nickel and cobalt
33. Diffusion studies and re-examination of the Kirkendall effect in the Au-Ni system10.1016/S0925-8388(00)01056-2 ↗
34. Interdiffusion in the face-centred cubic phase of the Ni–Re, Ni–Ta and Ni–W systems between 900 and 1300°C10.1016/S0921-5093(99)00705-4 ↗
35. Solute diffusion in metals: larger atoms can move faster10.1103/PhysRevLett.92.085901 ↗
36. Diffusion coefficients of transition metals in fcc cobalt10.1016/j.actamat.2017.04.060 ↗
37. Superplastic behavior of a powder metallurgy superalloy during isothermal compression10.1016/j.jmst.2019.05.025 ↗
38. Flow behavior and dynamic recrystallization of a power metallurgy nickel-based superalloy during hot compression in (γ + γ′)-phase region10.1016/j.jallcom.2021.161944 ↗
39. Hot deformation behavior and workability of a Ni–Co based superalloy10.1016/j.jallcom.2020.154618 ↗
40. A new method for evaluation of friction in bulk metal forming10.1016/j.jmatprotec.2004.03.029 ↗
41. Flow curve correction and processing map of 2050 Al–Li alloy10.1016/S1003-6326(18)64674-6 ↗
42. Effects of deformation microbands and twins on microstructure evolution of as-cast Mn18Cr18N austenitic stainless steel10.1557/jmr.2017.389 ↗
43. Electron backscattered diffraction study of microstructural evolution during isothermal deformation of high-N Mn18Cr18 alloy10.1007/s11663-019-01606-z ↗
44. Dislocation and twinning mechanisms for dynamic recrystallization of as-cast Mn18Cr18N steel10.1016/j.msea.2016.12.095 ↗
45. Hot deformation characteristics and dynamic recrystallization mechanism of GH4730 Ni-based superalloy10.1016/j.jallcom.2019.01.237 ↗
46. Hot deformation characteristics of Alloy 617B nickel-based superalloy: a study using processing map10.1016/j.jallcom.2015.05.192 ↗
47. Hot deformation characteristics and dynamic recrystallization mechanisms of a novel nickel-based superalloy10.1002/adem.202000622 ↗
48. Effect of hot deformation parameters on grain refinement of an as-cast Ni-based superalloy10.1007/s11665-020-05135-8 ↗