Effect of two-stage overaging on microstructure and corrosion properties of an Al–Zn–Mg–Cu alloy
Source abstract
Abstract
A two-stage overaging process was proposed to improve the electrical conductivity and stress corrosion cracking resistance (SCCR) of an Al–Zn–Mg–Cu alloy. The overaging process include a low-temperature aging at 120 °C for 5 h and a subsequent aging at 177 °C for 8, 14 and 24 h. The SCCR of the samples aged at 120 °C/5 h + 177 °C/24 h was higher than that of the T6 temper, at which the ISSRT is 1.2% and the electrical conductivity is 39.0%IACS. The increase of electrical conductivity is caused by the depletion of solution atoms during overaging. Meanwhile, the improvement of SCCR resistance is caused by the coarsening of grain boundary precipitates with higher Cu content. The tensile strength decreased from 663.5 MPa to 519.7 MPa, which is caused by the coarsen of strengthening precipitates in grains during overaging process.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Aluminum Alloy Microstructure Properties · Aluminum Alloys Composites Properties · Microstructure and mechanical properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (48)
Show source-provided references
1. Quench rate sensitivity of age-hardenable Al-Zn-Mg-Cu alloys with respect to the Zn/Mg ratio: an in situ SAXS and HEXRD study10.1016/j.actamat.2022.117727 ↗
2. The effects of anodizing process on the corrosion rate and fatigue life of aluminum alloy 7075-T7310.2320/matertrans.M2014121 ↗
3. Electrochemical characteristics of intermetallic phases in aluminum alloys: an experimental survey and discussion10.1149/1.1869984 ↗
4. Influence of high-temperature pre-precipitation on local corrosion behaviors of Al-Zn-Mg alloy10.1016/j.scriptamat.2006.09.028 ↗
5. Effect of stress-aging treatment on the mechanical and corrosion properties of Al−Zn−Mg−Cu alloy10.1016/j.msea.2022.142791 ↗
6. Modeling of yield strength in retrogression of RRA treatment of spray formed Al-Zn-Mg-Cu alloy10.4028/www.scientific.net/MSF.993.146 ↗
7. Retrogression and reaging of AA7075 and AA6013 aluminum alloys[J]10.1007/s11661-020-06133-0 ↗
8. Microstructure analysis of 7050 aluminum alloy processed by multistage aging treatments10.1016/j.jallcom.2022.164400 ↗
9. Investigation of mechanical and corrosion properties of an Al-Zn-Mg-Cu alloy under various ageing conditions and interface analysis of η′ precipitat10.1016/j.matdes.2015.06.183 ↗
10. Microchemical analysis of precipitate free zones in 7075-A1 in the T6, T7 and RRA tempers10.1016/0956-7151(91)90127-M ↗
11. Effect of two-stage aging on hardness and electrical conductivity of as-extruded 7075 Aluminum Alloy10.1088/1742-6596/1885/4/042035 ↗
12. Study on the strengthening mechanism of two-stage double-peaks aging in 7075 aluminum alloy10.1007/s12666-019-01809-7 ↗
13. Two-step aging treatment in ultra-high-strength Al-Zn-Mg-Cu aluminum alloy10.1051/matecconf/20166705020 ↗
14. Improved stress corrosion cracking resistance and strength of a two-step aged Al-Zn-Mg-Cu alloy using taguchi method10.1007/s11665-015-1733-5 ↗
15. Correlations between stress corrosion cracking susceptibility and grain boundary microstructures for an Al-Zn-Mg alloy10.1016/j.corsci.2013.07.032 ↗
16. Effect of microstructure on stress corrosion cracking of an Al-Zn-Mg-Cu alloy10.1016/S0010-938X(98)00002-X ↗
17. Quench sensitivity of AA 7136 alloy: contribution of grain structure and dispersoids10.1007/s11661-019-05397-5 ↗
18. HREM study and structure modeling of the η′ phase, the hardening precipitates in commercial Al-Zn-Mg alloys10.1016/S1359-6454(99)00138-X ↗
19. Effect of various retrogression regimes on aging behavior and precipitates characterization of a high Zn-containing Al-Zn-Mg-Cu alloy10.1007/s12540-018-0077-8 ↗
20. Effect of ageing temperature on microstructure, mechanical property and corrosion behavior of aluminum alloy 708510.1016/j.jallcom.2020.153792 ↗
21. Aging behavior and precipitate characterization of a high Zn-containing Al-Zn-Mg-Cu alloy with various tempers10.1016/j.matdes.2016.03.150 ↗
22. Quantitative metallography of precipitating and secondary phases after strengthening treatment of net shaped casting of Al-Zn-Mg-Cu (7000) alloys10.1016/j.msea.2017.05.047 ↗
23. Precipitation kinetics, mechanical strength and electrical conductivity of AlZnMgCu alloys10.1016/S1359-6454(96)00033-X ↗
24. Quantitative study of precipitates in an Al-Zn-Mg-Cu alloy aged with various typical tempers10.1016/j.msea.2013.09.005 ↗
25. Transmission electron microscopy investigation of separated nucleation and in-situ nucleation in AA7050 aluminium alloy10.1016/j.actamat.2018.02.045 ↗
26. Structure-property models in Al-Zn-Mg-Cu alloys: a critical experimental assessment of shape castings10.1016/j.msea.2018.07.048 ↗
27. Investigation of precipitation behavior and related hardening in AA 7055 aluminum alloy10.1016/j.msea.2008.09.065 ↗
28. Verhoeven · 1975
29. A micromechanical method for predicting the precipitation hardening response of particle strengthened alloys hardened by ordered precipitates10.1007/BF01291844 ↗
30. Enhanced stress corrosion cracking resistance and electrical conductivity of a T761 treated Al-Zn-Mg-Cu alloy thin plate10.1088/2053-1591/aaa605 ↗
31. Effect of recrystallization and heat treatment on strength and SCC of an Al-Zn-Mg-Cu alloy10.1016/j.jallcom.2013.07.177 ↗
32. Multi-stage heat treatment of aluminum alloy AA704910.1016/S1003-6326(13)62632-1 ↗
33. Influence of critical surface defects and localized competition between anodic dissolution and hydrogen effects during stress corrosion cracking of a 7050 aluminium alloy10.1016/S0921-5093(97)00369-9 ↗
34. Atom probe tomographic study of elemental segregation at grain boundaries for a peak-aged Al-Zn-Mg alloy10.1016/j.corsci.2013.10.027 ↗
35. Influence of retrogression temperature and time on the mechanical properties and exfoliation corrosion behavior of aluminium alloy AA715010.1016/j.matchar.2009.06.007 ↗
36. Relationship between alloy composition, microstructure and exfoliation corrosion in Al-Zn-Mg-Cu alloys10.1016/j.corsci.2011.05.057 ↗
37. Influence of grain-boundary pre-precipitation and corrosion characteristics of inter-granular phases on corrosion behaviors of an Al-Zn-Mg-Cu alloy10.1016/j.mseb.2012.04.008 ↗
38. Simulation study on function mechanism of some precipitates in localized corrosion of Al alloys10.1016/j.corsci.2006.12.002 ↗
39. Enhancing the stress corrosion cracking resistance of a low-Cu containing Al-Zn-Mg-Cu aluminum alloy by step-quench and aging heat treatment10.1016/j.corsci.2019.108184 ↗
40. Atmospheric stress corrosion cracking of a superplastic 7475 aluminum alloy10.1007/BF02652355 ↗
41. Hydrogen embrittlement studies of aged and retrogressed-reaged Al-Zn-Mg alloys10.1016/j.matchemphys.2006.08.004 ↗
42. Influence of alloyed Sc and Zr, and heat treatment on microstructures and stress corrosion cracking of Al-Zn-Mg-Cu alloys10.1016/j.msea.2014.10.058 ↗
43. Role of grain-boundary precipitates and solute-depleted zone on the intergranular corrosion of aluminum alloy 715010.5006/1.3287699 ↗
44. Evolution of grain boundary precipitates in Al 7075 upon aging and correlation with stress corrosion cracking behavior10.1007/s11661-012-1413-0 ↗
45. Nature of grain boundary precipitates and stress corrosion cracking behavior in Al 7075 and 7079 alloys
46. Hydrogen embrittlement susceptibility of over aged 7010 Al-alloy10.1007/s10853-006-0287-1 ↗
47. A transmission electron microscopy study of microscopic causes for localized-corrosion morphology variations in the AA7055 Al alloy10.1016/j.jmst.2018.05.006 ↗
48. Stress corrosion cracking and hydrogen embrittlement of an Al-Zn-Mg-Cu alloy10.1016/j.actamat.2004.06.023 ↗