journal article·2022-07Open access

Post-processing of selective laser melting manufactured SS-304L by laser shock peening

Sunil Pathak, Sanin Zulić, Jan Kaufman, Jaromír Kopeček, Ondřej Stránský, Marek Böhm, Jan Brajer, Libor Beránek, Ashish Shukla, Michal Ackermann, Filip Véle, Tomáš Mocek

Abstract

This paper investigates the post-processing of additively manufactured stainless steel (SS) 304 L samples through laser shock peening (LSP). Four samples, differently processed, (i) as-built (AB); (ii) as-built + annealed; (iii) as-built + polished; and (iv) as-built + annealed + polished, were used to study the effect of LSP at pre-identified parameters to understand the mechanism and behavior of processing different conditions. In addition, compressive residual stresses and surface morphology were considered as a response to measure the effects of LSP on processed samples. The results have shown significant improvements in compressive residual stresses where the values have changed from initial tensile to compressive (−1170 MPa) and remain compressive up to the depth of 1 mm in most cases. The results of this research help better understand the LSP mechanism in the post-processing of AM Parts.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Additive Manufacturing Materials and Processes · Surface Treatment and Residual Stress · Laser Material Processing Techniques

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (7)

Show source-provided references
1. Additive manufacturing of metallic components – process, structure and properties10.1016/j.pmatsci.2017.10.001 ↗
2. Heat treatment of Ti6Al4V produced by selective laser melting: microstructure and mechanical properties10.1016/j.jallcom.2012.07.022 ↗
3. Fatigue life enhancement of additive manufactured 316l stainless steel by LSP using a DPSS laser system10.1080/02670844.2022.2060463 ↗
4. Laser peening: a tool for additive manufacturing post-processing
5. Improvements of metal additive manufactured AISI 304L and Ti6Al4V parts by using laser shock peening as a post-process technique
6. The utilization of selective laser melting technology on heat transfer devices for thermal energy conversion applications: a review10.1016/j.rser.2018.03.109 ↗
7. Investigation of SLM process in terms of temperature distribution and melting pool size: modeling and experimental approaches10.3390/ma12081272 ↗