journal article·2023-01Open access

Effect of Mn addition on the microstructure, mechanical, and corrosion properties of an extruded biodegradable Zn-0.2Mg alloy

N. Mollaei, S.H. Razavi, M.R. Aboutalebi, S.M. Fatemi

Abstract

In this study, the effect of Mn addition on microstructural evolution, mechanical properties, and biocorrosion behaviors of as-extruded Zn-0.2 Mg alloy as candidates for degradable biomaterials were investigated. The microstructural observations indicated that the addition of Mn element significantly refined α-Zn grains, and the average size decreased from 17.23 μm to 7.14 μm. Moreover, Mn-rich intermetallic precipitated alongside eutectic Mg2Zn11 phases. A result of electron backscattered diffraction indicated that manganese has caused grains to rotate 19°, facilitating the activation of non-basal slip as the Schmid factor increases. Mechanical test results showed that the yield strength (YS), ultimate tensile strength (UTS), and elongation (El) of Zn-0.2Mg-0.5Mn alloy is improved by 35.92%, 31.51%, and 6.65%, respectively, compared with Zn-0.2 Mg alloy. The main mechanisms responsible for the improvement of mechanical properties were higher volume fraction of the particles, grain refinement, texture modification, and deformation twining formed by Mn addition. The electrochemical test in SBF solution at human body temperature revealed that the corrosion rate of Mn-containing alloy increased from 0.664 mm/year to 0.87 mm/year compared to the base alloy. It is evident from these results that the Zn-0.2Mg-0.5Mn alloy has a great deal of potential as a cardiovascular stent material.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Magnesium Alloys: Properties and Applications · Corrosion Behavior and Inhibition · Aluminum Alloys Composites Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (49)

Show source-provided references
1. Challenges in the use of zinc and its alloys as biodegradable metals: perspective from biomechanical compatibility
2. Novel Zn-based alloys for biodegradable stent applications: design, development and in vitro degradation10.1016/j.jmbbm.2016.03.018 ↗
3. The influence of alloying and fabrication techniques on the mechanical properties, biodegradability and biocompatibility of zinc: a comprehensive review10.1016/j.actbio.2019.01.035 ↗
4. Biodegradable metals for cardiovascular stents: from clinical concerns to recent Zn-alloys10.1002/adhm.201501019 ↗
5. Design and characterizations of novel biodegradable ternary Zn-based alloys with IIA nutrient alloying elements Mg, Ca and Sr10.1016/j.matdes.2015.05.089 ↗
6. Effects of Fe addition on the microstructures and mechanical properties of as-extruded Zn-0.2Mg alloys10.1016/j.jallcom.2021.162912 ↗
7. Research on a Zn-Cu alloy as a biodegradable material for potential vascular stents application10.1016/j.msec.2016.06.082 ↗
8. Zn-Li alloy after extrusion and drawing: structural, mechanical characterization, and biodegradation in abdominal aorta of rat10.1016/j.msec.2017.02.167 ↗
9. Zinc-based alloys for degradable vascular stent applications10.1016/j.actbio.2018.03.005 ↗
10. Structure , mechanical characteristics and in vitro degradation , cytotoxicity , genotoxicity and mutagenicity of novel biodegradable Zn – Mg alloys10.1016/j.msec.2015.08.015 ↗
11. Microstructure, mechanical properties and fracture behavior of As-extruded Zn-Mg binary alloys10.1007/s40195-017-0585-4 ↗
12. In vitro and in vivo studies of Zn-Mn biodegradable metals designed for orthopedic applications10.1016/j.actbio.2020.03.009 ↗
13. Micro-alloying with Mn in Zn-Mg alloy for future biodegradable metals application10.1016/j.matdes.2015.12.128 ↗
14. Microalloyed Zn-Mn alloys: from extremely brittle to extraordinarily ductile at room temperature10.1016/j.matdes.2018.02.049 ↗
15. Abnormal effect of Mn addition on the mechanical properties of as-extruded Zn alloys10.1016/j.msea.2017.06.037 ↗
16. Ultra-fine-grained Zn-0.5Mn alloy processed by multi-pass hot extrusion: grain refinement mechanism and room-temperature superplasticity10.1016/j.msea.2019.01.089 ↗
17. Dynamic recrystallization and deformation behavior of an extruded Zn-0 . 2 Mg biodegradable alloy10.1016/j.jmrt.2022.06.159 ↗
18. Bagha · J Alloys Compd · 2017
19. Influence of solution heat treatment on microstructure and hardness of as-cast biodegradable Zn–Mn alloys10.1007/s10853-018-2905-0 ↗
20. Grain boundary plane orientation fundamental zones and structure-property relationships10.1038/srep15476 ↗
21. Microstructure evolution and grain refinement behavior during hot deformation of Fe micro-alloyed Ti-6Al-4V10.1016/j.jmrt.2021.09.009 ↗
22. Correlation of plastic deformation and dynamic recrystallization in magnesium alloy ZK6010.1016/S1359-6454(01)00020-9 ↗
23. Deformation mode dependent mechanism and kinetics of dynamic recrystallization in hot working of titanium alloy10.1016/j.msea.2019.138804 ↗
24. On the stress dependence of partial dislocation separation and deformation microstructure in austenitic stainless
25. Deformation twinning in bulk manocrystalline metals: experimental observations
26. Wang · Texture analysis in hexagonal materials · 2003 · 81 · 11
27. Dislocation interactions with grain boundaries10.1016/j.cossms.2014.05.004 ↗
28. Effect of Cu addition on the microstructure, mechanical properties and degradation rate of Mg-2Gd alloy10.1016/j.jmrt.2021.08.042 ↗
29. Maire
30. Structure, mechanical characteristics and in vitro degradation, cytotoxicity, genotoxicity and mutagenicity of novel biodegradable Zn-Mg alloys10.1016/j.msec.2015.08.015 ↗
31. Twinning and the ductility of magnesium alloys Part I : “ Tension ” twins10.1016/j.msea.2006.12.037 ↗
32. Multi-interactions of dislocations and refined microstructure in a high strength and toughness Zn-Mg-Mn alloy10.1016/j.jmrt.2020.09.126 ↗
33. Grain boundary pinning by Al6Mn precipitates in an Al-1wt%Mn alloy10.1016/j.scriptamat.2003.09.031 ↗
34. Materials & Design Long-term in vitro corrosion behavior of Zn-3Ag and Zn-3Ag-0 . 5Mg alloys considered for biodegradable implant applications
35. Zn-Mg and Zn-Cu alloys for stenting applications: from nanoscale mechanical characterization to in vitro degradation and biocompatibility
36. The prospects of zinc as a structural material for biodegradable implants—a review paper10.3390/met7100402 ↗
37. Influence of Cu addition on the microstructure, mechanical, and corrosion properties of extruded Mg-2%Zn alloy10.1007/s11665-020-04856-0 ↗
38. The effect of crystallographic orientation on the active corrosion of pure magnesium10.1016/j.scriptamat.2007.10.027 ↗
39. Influence of crystallographic texture and grain size on the corrosion behaviour of as-extruded Mg alloy AZ31 sheets10.1016/j.corsci.2017.08.004 ↗
40. The surface, microstructure and corrosion of magnesium alloy AZ31 sheet10.1016/j.electacta.2010.02.068 ↗
41. Effects of deformation texture and twins on the corrosion resistance of rolled AZ31 Mg alloy under 5% uniaxial compression10.1007/s40195-017-0639-7 ↗
42. First-principles modeling of the hydrogen evolution reaction and its application in electrochemical corrosion of Mg10.1016/j.actamat.2019.11.025 ↗
43. Effect of grain size and twins on corrosion behaviour of AZ31B magnesium alloy10.1016/j.corsci.2009.10.018 ↗
44. Effect of texture and twinning on mechanical properties and corrosion behavior of an extruded biodegradable Mg–4Zn alloy10.1016/j.jma.2019.11.001 ↗
45. Reducing the resistance for the use of electrochemical impedance spectroscopy analysis in materials chemistry10.1039/D1RA03785D ↗
46. Effects of Mn on the electrochemical corrosion and passivation behavior of CoFeNiMnCr high-entropy alloy system in H2SO4 solution10.1016/j.jallcom.2019.152943 ↗
47. In vitro corrosion and mineralization of novel Ti-Si-C alloy10.1016/j.electacta.2011.02.045 ↗
48. Investigation of the low frequency Warburg impedance of Li-ion cells by frequency domain measurements10.1016/j.est.2018.11.029 ↗
49. Price · 2012