journal article·2023-05Open access

Porous In2O3–ZnO nanofiber-based sensor for ultrasensitive room-temperature detection of toluene gas under UV illumination

Zhicheng Cai, Jiho Park, Sunghoon Park

Abstract

Toluene gas is hazardous but plays a vital role in several industries. Hence, the detection of toluene gas is important for human health and the environment. In this study, porous In2O3–ZnO nanofibers were prepared via a facile electrospinning method to fabricate a toluene gas sensor. Illumination by ultraviolet light (365 nm) was used to realize the room temperature (RT) operation of the fabricated sensor. The structural properties of the sensor were studied using various characterization techniques. The prepared nanofibers consisted of many sub-nanograins, particularly ZnO and In2O3, and contained numerous pores in-between the nanograins. Consequently, these nanofibers had a large surface area, increasing the probability of contact between the gas and sensor. The prepared sensors were functional at RT under UV illumination and showed excellent toluene-sensing properties. The porous In2O3-appended ZnO-nanofiber-based sensors showed more stable and sensitive response curves than those of the pure ZnO nanofiber–based sensor. Moreover, In2O3-appended ZnO nanofiber sensors could only faintly detect other gases, such as NO2, acetone, ethanol, H2S, and CO gases, indicating that the sensor exhibits highly selective toluene sensing.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Gas Sensing Nanomaterials and Sensors · ZnO doping and properties · Advanced Chemical Sensor Technologies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (93)

Show source-provided references
1. TiO2 nanowires for humidity-stable gas sensors for toluene and xylene10.1021/acsanm.0c02963 ↗
2. Sensing response of toluene gas and structural properties of CdS-SnO2 thick films sensor
3. Highly sensitive and selective toluene sensor of bimetallic Ni/Fe-MOFs derived porous NiFe2O4 nanorods10.1021/acs.iecr.9b01497 ↗
4. Excellent toluene gas sensing properties of molecular imprinted Ag-LaFeO3 nanostructures synthesized by microwave-assisted process10.1016/j.materresbull.2018.11.040 ↗
5. Room temperature conductive type metal oxide semiconductor gas sensors for NO2detection10.1016/j.sna.2019.02.027 ↗
6. Semiconductor metal oxide gas sensors: a review Mater10.1016/j.mseb.2017.12.036 ↗
7. Gas sensing mechanisms of metal oxide semiconductors: a focus review10.1039/C9NR07699A ↗
8. Metal-oxide semiconductors for carbon monoxide (CO) gas sensing: a review
9. Ultra-highly sensitive and selective H2S gas sensor based on CuO with sub-ppb detection limit10.1016/j.ijhydene.2018.12.083 ↗
10. Fabrication of ZnO quantum dots@SnO2 hollow nanospheres hybrid hierarchical structures for effectively detecting formaldehyde
11. Enhancement of hydrogen sensing response of ZnO nanowires for the decoration of WO3 nanoparticles10.1016/j.matlet.2018.09.129 ↗
12. An indoor light-activated 3D cone-shaped MoS2 bilayer-based NO gas sensor with PPb-level detection at room-temperature10.1039/C8NR10157D ↗
13. Ammonia gas sensor response of a vertical zinc oxide nanorod-gold junction diode at room temperature10.1021/acssensors.0c01769 ↗
14. Semiconductor gas sensors: materials, technology, design, and application10.3390/s20226694 ↗
15. Synthesis of Pd nanoparticle-decorated SnO2 nanowires and determination of the optimum quantity of Pd nanoparticles for highly sensitive and selective hydrogen gas sensor10.1016/j.snb.2020.128651 ↗
16. Fabrication of In2O3/ZnO@Ag nanowire ternary composites with enhanced visible light photocatalytic activity10.1039/C7RA04929C ↗
17. Room-temperature gas sensing of ZnO-based gas sensor: a review10.1016/j.sna.2017.10.021 ↗
18. Review of ZnO-based nanomaterials in gas sensors10.1016/j.ssi.2020.115544 ↗
19. Low-temperature operating ZnO-based NO2sensors: a review RSC
20. Recent progress and perspectives of gas sensors based on vertically oriented ZnO nanomaterials10.1016/j.cis.2019.05.006 ↗
21. Room temperature operatable high sensitive toluene gas sensor using chemiresistive Ag/Bi2O3 nanocomposite
22. Gas sensors based on multiple-walled carbon nanotubes-polyethylene oxide films for toluene vapor detection10.1016/j.snb.2013.09.079 ↗
23. Room temperature toluene gas sensor based on TiO2 nanoparticles decorated 3D graphene-carbon nanotube nanostructures10.1016/j.snb.2018.09.095 ↗
24. Surface functionalization of porous In2O3 nanofibers with Zn nanoparticles for enhanced low-temperature NO2 sensing properties
25. Electronic nose for toxic gas detection based on photostimulated core–shell nanowires10.1039/C4RA06143H ↗
26. Synthesis of multishelled SnOx/Co3O4 amorphous/crystalline heterophase with galvanic replacement reaction for superior HCHO sensing10.1016/j.snb.2021.130876 ↗
27. Enhanced formaldehyde gas sensing performance of ternary CuBi2O4 oxides through oxygen vacancy manipulation and surface platinum decoration10.1016/j.snb.2021.130190 ↗
28. Reduced graphene oxide-CuFe2O4 nanocomposite: a highly sensitive room temperature NH3 gas sensor10.1016/j.snb.2018.05.093 ↗
29. Gold-loaded tellurium nanobelts gas sensor for ppt-level NO2 detection at room temperature10.1016/j.snb.2021.131300 ↗
30. α-Fe2O3 loaded rGO nanosheets based fast response/recovery CO gas sensor at room temperature10.1016/j.apsusc.2018.09.123 ↗
31. UV-enhanced NO2 gas sensors based on In2O3/ZnO composite material modified by polypeptides10.1088/1361-6528/ac46b2 ↗
32. In2O3-ZnO nanotubes for the sensitive and selective detection of ppb-level NO2 under UV irradiation at room temperature10.1016/j.snb.2021.131322 ↗
33. Advances in In2O3-based materials for the development of hydrogen sulfide sensors
34. Ultrasensitive gas sensor based on nanocube In2O3-CNH composite at low operating temperature10.1016/j.snb.2021.131224 ↗
35. Synthesis of Ce-doped In2O3 nanostructure for gas sensor applications10.1016/j.apsusc.2017.09.177 ↗
36. VOCs gas sensor based on MOFs derived porous Au@Cr2O3-In2O3 nanorods for breath analysis10.1016/j.colsurfa.2021.127752 ↗
37. In2O3-SnO2 hybrid porous nanostructures delivering enhanced formaldehyde sensing performance10.1016/j.jallcom.2018.02.171 ↗
38. Effect of resonant tunneling modulation on ZnO/In2O3 heterojunction nanocomposite in efficient detection of NO2 gas at room temperature10.1016/j.snb.2020.129230 ↗
39. A high-response formaldehyde sensor based on fibrous Ag-ZnO/In2O3 with multi-level heterojunctions10.1016/j.jhazmat.2021.125352 ↗
40. Sedum lineare flower-like ordered mesoporous In2O3/ZnO gas sensing materials with high sensitive response to H2S at room temperature prepared by self-assembled of 2D nanosheets10.1016/j.jallcom.2020.156170 ↗
41. The n-ZnO/n-In2O3 heterojunction formed by a surface-modificationand their potential barrier-control in methanal gas sensing10.1016/j.snb.2015.08.085 ↗
42. 1D/2D heterostructure nanofiber flexible sensing device with efficient gas Detectivity10.1016/j.apsusc.2019.02.094 ↗
43. 1D Metal oxide semiconductor materials for chemiresistive gas sensors: a review10.1002/aelm.202100271 ↗
44. Metal oxide patterns of one-dimensional nanofibers: on-demand, direct-write fabrication, and application as a novel platform for gas detection
45. Novel electro-spun nanograined ZnO/Au heterojunction nanofibers and their ultrasensitive NO2 gas sensing properties10.1002/slct.201800103 ↗
46. Functionalization of 1D In2O3 nanotubes with abundant oxygen vacancies by rare earth dopant for ultra-high sensitive ethanol detection10.1016/j.snb.2020.128755 ↗
47. Synergistic effects of a combination of Cr2O3-functionalization and UV-irradiation techniques on the ethanol gas sensing performance of ZnO nanorod gas sensors10.1021/acsami.5b11485 ↗
48. Low temperature ethanol response enhancement of ZnO nanostructures sensor decorated with gold nanoparticles exposed to UV illumination10.1016/j.sna.2016.10.022 ↗
49. An easy method of preparing ozone gas sensors based on ZnO nanorods10.1039/C5RA00581G ↗
50. Facial development of high performance room temperature NO2 gas sensors based on ZnO nanowalls decorated rGO nanosheets10.1016/j.apsusc.2017.06.160 ↗
51. Development of highly sensitive ZnO/In2O3 composite gas sensor activated by UV-LED10.1016/j.snb.2016.10.129 ↗
52. Enhancing the performance of room temperature ZnO microwire gas sensor through a combined technology of surface etching and UV illumination10.1016/j.matlet.2017.10.102 ↗
53. Ultra-high sensitivity zinc oxide nanocombs for on-chip room temperature carbon monoxide sensing10.3390/s150408919 ↗
54. Glucose-assisted synthesis of hierarchical NiO-ZnO heterostructure with enhanced glycol gas sensing performance10.1016/j.snb.2020.129167 ↗
55. Gas-sensing selectivity of n-ZnO/p-Co3O4 sensors for homogeneous reducing gas10.1016/j.jpcs.2020.109864 ↗
56. Soft-lithographically line-patterned In-doped ZnO quantum dots with hydrothermally grown ZnO nanocolumns for acetone detection10.1016/j.snb.2020.129131 ↗
57. Facile synthesis of α-Fe2O3/ZnO core-shell nanowires for enhanced H2S Sensing10.1016/j.snb.2019.127617 ↗
58. Ultrahigh sensitivity and surface mechanism of gas sensing process in composite material of combining In2O3 with metal-organic frameworks derived Co3O410.1016/j.snb.2021.129990 ↗
59. Synergistic effect of surface and bulk single-electron-trapped oxygen vacancy of TiO2 in the photocatalytic reduction of CO210.1016/j.apcatb.2017.01.025 ↗
60. Effects of annealing ambient on oxygen vacancies and phase transition temperature of VO2thin films10.1039/C6RA13189A ↗
61. An overview of advanced methods for the characterization of oxygen vacancies in materials10.1016/j.trac.2019.05.002 ↗
62. Defective BiFeO3with surface oxygen vacancies: facile synthesis and mechanism insight into photocatalytic performance10.1016/j.solmat.2017.06.021 ↗
63. Functionalization of 1D In2O3 nanotubes with abundant oxygen vacancies by rare earth dopant for ultra-high sensitive ethanol detection10.1016/j.snb.2020.128755 ↗
64. In2O3-ZnO nanotubes for the sensitive and selective detection of ppb-level NO2 under UV irradiation at room temperature10.1016/j.snb.2021.131322 ↗
65. Rapid and accurate detection of highly toxic NO2 gas based on catkins biomass-derived porous In2O3 microtubes at low temperature10.1016/j.snb.2022.131692 ↗
66. The fabrication and triethylamine sensing performance of In-MIL-68 derived In2O3 with porous lacunaris structure10.1016/j.snb.2020.128791 ↗
67. Synthesis and low temperature methane sensing performance of Pd modified In2O3 microspheres10.1016/j.matchemphys.2022.125749 ↗
68. Nanosheet-assembled In2O3 for sensitive and selective ozone detection at low temperature10.1016/j.jallcom.2021.161430 ↗
69. Highly sensitive NO2 detection on ppb level by devices based on Pd-loaded In2O3 hierarchical microstructures10.1016/j.snb.2017.05.113 ↗
70. High response and selectivity of single crystalline ZnO nanorods modified by In2O3 nanoparticles for n-butanol gas sensing10.1016/j.snb.2018.08.144 ↗
71. In2O3-ZnO nanocomposites: high sensor response and selectivity to ethanol10.1016/j.snb.2015.02.030 ↗
72. Development of highly sensitive ZnO/In2O3 composite gas sensoractivated by UV-LED10.1016/j.snb.2016.10.129 ↗
73. Improved photocatalytic activity of ZnO via the modification of In2O3 and MoS2 surface species for the photoreduction of CO210.1016/j.apsusc.2021.150649 ↗
74. Ultrahigh sensitivity and surface mechanism of gas sensing process in composite material of combining In2O3 with metal-organic frameworks derived Co3O410.1016/j.snb.2021.129990 ↗
75. Microwave hydrothermal synthesis of In2O3-ZnO Nanocomposites and their enhanced photoelectrochemical properties10.1149/2.0071905jes ↗
76. Interface engineering of ZnO/In2O3 Z-scheme heterojunction with yolk-shell structure for efficient photocatalytic hydrogen evolution10.1016/j.apsusc.2022.153306 ↗
77. A superior sensor consisting of porous Pd nanoparticle-decorated SnO2 nanotubes for the detection of ppb-level hydrogen gas10.1016/j.jallcom.2022.164459 ↗
78. Construction of In2O3/ZnO yolk-shell nanofibers for room-temperature NO2 detection under UV illumination10.1016/j.jhazmat.2020.124093 ↗
79. UV-activated ultrasensitive and fast reversible ppb NO2 sensing based on ZnO nanorod modified by constructing interfacial electric field with In2O3 nanoparticles10.1016/j.snb.2019.127498 ↗
80. Hydrogen sensing performance and its enhanced sensing mechanisms of hollow structured-SnO2 nanospheres activated by noble metal nanoparticles
81. Heterostructure of CuO microspheres modified with CuFe2O4 nanoparticles for highly sensitive H2S gas sensor10.1016/j.snb.2018.02.110 ↗
82. Metal-Organic frameworks-derived bamboo-like CuO/In2O3 heterostructure for high-performance H2S gas sensor with low operating temperature10.1016/j.snb.2020.127828 ↗
83. Room temperature detection of NO2 gas under UV irradiation based on Au nanoparticle-decorated porous ZnO nanowires
84. MOFs-derived porous NiFe2O4 nano-octahedrons with hollow interiors for an excellent toluene gas sensor10.3390/nano9081059 ↗
85. Room temperature photoelectric NO2 gas sensor based on direct growth of walnut-like In2O3 nanostructures10.1016/j.jallcom.2018.12.180 ↗
86. DNA-CTMA functionalized GaN surfaces for NO2 gas sensor at room temperature under UV illumination10.1016/j.orgel.2018.11.038 ↗
87. Highly sensitive and selective H2S gas sensors based on flower-like WO3/CuO composites operating at low/room temperature10.1016/j.jallcom.2019.01.349 ↗
88. Advances in designs and mechanisms of semiconducting metal oxide nanostructures for high-precision gas sensors operated at room temperature10.1039/C8MH01365A ↗
89. UV-light enhanced high sensitive hydrogen (H2) sensor based on spherical Au nanoparticles on ZnO nano-structured thin films10.1016/j.jallcom.2019.05.227 ↗
90. Optoelectronic gas sensor sensitized by hierarchically structured ZnO nanorods/Ag nanofibers via on-chip fabrication10.1016/j.matlet.2019.01.106 ↗
91. Study on the gas-sensitive properties for formaldehyde based on SnO2-ZnO heterostructure in UV excitation10.1016/j.snb.2017.07.197 ↗
92. CuO nanorod arrays by gas-phase cation exchange for efficient photoelectrochemical water splitting10.1039/D2RA07648A ↗
93. Rational design of type-II nano-heterojunctions for nanoscale optoelectronics