journal article·2023-09Open access

Thermodynamic calculation and machine learning aided composition design of new nickel-based superalloys

Qingshuang Ma, Xintong Li, Ruifeng Xin, Enyu Liu, Qiuzhi Gao, Linlin Sun, Xuming Zhang, Chengxian Zhang

Abstract

At present, the operating temperature of the fourth-generation of nickel-based powder superalloys has not reach the target of 815°C, and the traditional superalloy design and optimization methods are costly and inefficient. To overcome these challenges, phase diagram is used to calculate the thermodynamic parameters of the typical first three generations of nickel-based powder superalloys and representative fourth-generation superalloys. From strengthening processes including solid solution strengthening and γ' phase strengthening, the effects of alloy compositions on alloy characteristics are examined. Based on this analysis, the thermodynamic standards that satisfy the performance requirements of the fourth-generation nickel-based powder superalloys are established. Then, the standards are applied to JMatPro and machine learning techniques as the foundation for determining the composition selection range, and several new nickel-based superalloys are created. The machine learning aided alloy design concept and theoretical results will provide significant guidance for further study of new nickel-based superalloys.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: High Temperature Alloys and Creep · Advanced Materials Characterization Techniques · Additive Manufacturing Materials and Processes

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (34)

Show source-provided references
1. Development in new type high-performance P/M superalloys
2. Coarsening evolution of γ′ phase and failure mechanism of Co-Ni-Al-Ti-based superalloys during isothermal aging
3. Research and development in P/M superalloy
4. Electronic structure and mechanical properties of Cr7C310.1016/j.physleta.2004.04.068 ↗
5. Microstructure and properties of advanced nickel-base PM superalloy10.1016/S1006-706X(14)60198-9 ↗
6. Study on composition variation range of the fourth generation PM superalloys
7. Advanced supersolvus nickel powder disk alloy DOE: chemistry, properties, phase formations and thermal stability, Superalloys 2016
8. Effect of stacking fault segregation and local phase transformations on creep strength in Ni-base superalloys10.1016/j.actamat.2019.04.038 ↗
9. Enhancing the creep strength of next-generation disk superalloys via local phase transformation strengthening, Superalloys 2020
10. On the effect of Nb on the microstructure and properties of next generation polycrystalline powder metallurgy Ni-based superalloys10.1007/s11661-018-4682-4 ↗
11. σ and η Phase formation in advanced polycrystalline Ni-base superalloys10.1016/j.msea.2017.01.064 ↗
12. The effect of Nb on grain boundary segregation of B in high refractory Ni-based superalloys10.1016/j.scriptamat.2017.05.028 ↗
13. Enhanced creep performance in a polycrystalline superalloy driven by atomic-scale phase transformation along planar faults10.1016/j.actamat.2020.10.062 ↗
14. Comparison of thermodynamic database models and APT data for strength modeling in high Nb content γ-γ′ Ni-base superalloys10.1016/j.matdes.2015.07.171 ↗
15. Nickel-based superalloys
16. Numerical modelling of precipitation of topologically close-packed phases in nickel-base superalloys10.1016/j.actamat.2010.09.035 ↗
17. Research on effect of alloy elements on equilibrium and properties of Ni-Cr-Co type nickel-based superalloy10.4028/www.scientific.net/MSF.849.513 ↗
18. Alloying effects and effective alloy design of high-Cr CoNi-based superalloys via a high-throughput experiments and machine learning framework10.1016/j.actamat.2022.118525 ↗
19. Quaternary chromium-based alloys strengthened by Heusler phase precipitation10.1016/j.msea.2015.09.033 ↗
20. Stability of γ′ multimodal microstructure in a Ni-based powder metallurgy superalloy10.1007/s11431-018-9372-8 ↗
21. New Ni–Co-base disk superalloys with higher strength and creep resistance10.1016/j.scriptamat.2006.07.008 ↗
22. Experimental cast nickel superalloys and gamma-prime alloys for high temperature applications in gas turbines
23. Quench crack behavior of nickel-base disk superalloys10.1007/BF02717409 ↗
24. Effect of γ′ precipitation during hot isostatic pressing on the mechanical property of a nickel-based superalloy10.1016/j.msea.2007.07.020 ↗
25. Recent development of third generation P/M superalloy René104
26. Developing damage tolerance and creep resistance in a high strength nickel alloy for disc applications, Superalloys 2004
27. Reed · 2006 · 101
28. Microstructural stability and mechanical properties of a new nickel-based superalloy10.1016/S0921-5093(03)00051-0 ↗
29. High-temperature creep property deterioration of the alumina-forming austenitic steel: effect of σ phase10.1016/j.msea.2022.143126 ↗
30. Evolution and analysis of TCP phase in a single crystal nickel-based superalloy containing Re during aging10.1007/s12598-011-0323-4 ↗
31. Influence of TCP phase and its morphology on creep properties of single crystal nickel-based superalloys10.1016/j.msea.2010.05.027 ↗
32. Segregation and η phase formation along stacking faults during creep at intermediate temperatures in a Ni-based superalloy10.1016/j.actamat.2015.08.053 ↗
33. Recent development of fourth generation powder metallurgy superalloys in America and Europe
34. Domain-knowledge-oriented data pre-processing and machine learning of corrosion-resistant γ-U alloys with a small database10.1016/j.commatsci.2021.110472 ↗