Effect of Ti6Al4V reinforcement particles on the mechanical, wear, and corrosion properties of AZ91D magnesium matrix composites
Source abstract
Abstract
This study aims to synthesize composite materials using TC4 particles and AZ91D alloy through semi-solid stirring and hot extrusion techniques. The main objective is to investigate the microstructure, mechanical properties, wear resistance, and corrosion behavior of composites comprising a minor volume fraction (0, 2, and 5 vol%) of spherical TC4 particles. The findings showed that the dual synergistic effect of TC4 particles and the β-phase leads to a refinement in the grain size of the composite material. Moreover, the incorporation of TC4 particles enhances the hardness, yield strength (YS), and ultimate tensile strength (UTS) of the magnesium matrix, with almost no reduction observed in ductility. Additionally, the TC4/AZ91D composite displays lower wear rates and friction coefficients compared to the matrix when subjected to forces of 150 N and 300 N. However, the corrosion performance of the composite material deteriorates due to the influence of the galvanic effect between the particles and the matrix.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Aluminum Alloys Composites Properties · Magnesium Alloys: Properties and Applications · Aluminum Alloy Microstructure Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (47)
Show source-provided references
1. Effect of SiCp on the microstructure and tensile properties of the Mg–3Y magnesium alloy10.1016/j.jmrt.2023.04.063 ↗
2. Effect of multi-pass friction stir processing on the microstructure evolution and corrosion behavior of ZrO2/AZ31 magnesium matrix composite10.1016/j.jmrt.2022.02.127 ↗
3. Research advances in magnesium and magnesium alloys worldwide in 202010.1016/j.jma.2021.04.001 ↗
4. Ageing behavior of as-cast SiCp/AZ91 Mg matrix composites10.1016/j.msea.2016.11.072 ↗
5. Understanding the anti-wear mechanism of SiCp/WE43 magnesium matrix composite10.1016/j.vacuum.2019.109049 ↗
6. Hybrid magnesium matrix composites: a review of reinforcement philosophies, mechanical and tribological characteristics
7. Using a new sustainable carbon reinforcement in magnesium matrix composites10.1016/j.matchemphys.2022.125886 ↗
8. Development of high performance magnesium nano-composites using nano-Al2O3 as reinforcement10.1016/j.msea.2004.09.047 ↗
9. Compressive mechanical properties of Mg-Ti-C nanocomposite synthesised by mechanical milling10.1016/S1359-6462(01)00925-3 ↗
10. The creep behavior of Mg–9Al–1Si–1SiC composite at elevated temperature10.1016/j.jma.2019.06.004 ↗
11. Damping characterization and its underlying mechanisms in CNTs/AZ91D composite processed by cyclic extrusion and compression10.1016/j.msea.2021.141605 ↗
12. Microstructure refinement after the addition of titanium particles in AZ31 magnesium alloy resistance spot welds10.1007/s11661-011-0881-y ↗
13. The influence of Ti particles on microstructure and mechanical properties of Mg-5Al-5RE matrix alloy composite10.1016/j.jallcom.2017.08.177 ↗
14. Fabrication and characterization of monolithic nanoporous copper through chemical dealloying of Mg–Cu alloys10.1016/j.corsci.2009.05.043 ↗
15. The ultrahigh damping capacity of Mg-Sn-Y alloy10.1016/j.scriptamat.2023.115514 ↗
16. Magnesium-based nanocomposites: lightweight materials of the future10.1016/j.matchar.2015.04.015 ↗
17. Effect of applied pressure on microstructure and mechanical properties of Mg–Zn–Y quasicrystal-reinforced AZ91D magnesium matrix composites prepared by squeeze casting10.1016/S1003-6326(15)64041-9 ↗
18. Microstructure, mechanical properties and wear resistance of Ti particles reinforced AZ31 magnesium matrix composites10.1016/j.jma.2022.06.012 ↗
19. Trace Y for as-cast Ti6Al4V to simultaneous enhance strength-ductility10.1016/j.jallcom.2023.169757 ↗
20. Formation of a metastable fcc phase and high Mg solubility in the Ti-Mg system by mechanical alloying10.1016/j.powtec.2020.07.053 ↗
21. Wettability of pure Ti by molten pure Mg droplets10.1016/j.actamat.2009.09.039 ↗
22. Processing, microstructure and mechanical properties of Ti6Al4V particles-reinforced Mg matrix composites10.1007/s40195-016-0473-3 ↗
23. Influence of Ti-6Al-4V particles on the interfacial microstructure and strength-ductility synergetic mechanism of AZ91 magnesium alloy10.1016/j.matchar.2022.112154 ↗
24. Investigation on mechanical and wear performance of ultrasonic-assisted stir cast AZ91D/Al2O3 magnesium matrix composites
25. Corrosion resistance and tribological behavior of particles reinforced AZ31 magnesium matrix composites developed by friction stir processing10.1016/j.jmrt.2021.01.071 ↗
26. Microstructures and mechanical properties of ultrafine-grained Ti/AZ31 magnesium matrix composite prepared by powder metallurgy10.1016/j.apt.2018.09.001 ↗
27. Review of recent studies in magnesium matrix composites10.1023/B:JMSC.0000043583.47148.31 ↗
28. Dry sliding wear behavior of globular AZ91 magnesium alloy and AZ91/SiCp composites10.1016/j.wear.2017.06.010 ↗
29. Effect of TiC reinforcement on mechanical and wear properties of AZ91 matrix composites10.1007/s40962-021-00747-9 ↗
30. Microstructures and mechanical properties of titanium-reinforced magnesium matrix composites: review and perspective10.1016/j.jma.2022.07.008 ↗
31. Properties and deformation behaviour of Mg–Y2O3 nanocomposites10.1016/j.actamat.2007.05.032 ↗
32. Particle effects on recrystallization in magnesium–manganese alloys: particle-stimulated nucleation10.1016/j.actamat.2009.02.032 ↗
33. Optimizing the microstructures and enhancing the mechanical properties of AZ81 alloy by adding TC4 particles10.1016/j.msea.2022.144518 ↗
34. Current issues in recrystallization: a review10.1016/S0921-5093(97)00424-3 ↗
35. Strengthening behavior of particulate reinforced MMCs10.1016/0956-716X(92)90108-Q ↗
36. Hall–Petch relation and boundary strengthening10.1016/j.scriptamat.2004.06.002 ↗
37. Microstructure and strengthening mechanism of bimodal size particle reinforced magnesium matrix composite10.1016/j.compositesa.2012.03.007 ↗
38. Enhancing compressive response of AZ31B magnesium alloy using alumina nanoparticulates10.1016/j.compscitech.2008.04.020 ↗
39. Effects of hot extrusion on microstructure and mechanical properties of Mg matrix composite reinforced with deformable TC4 particles10.1016/j.jma.2019.05.015 ↗
40. Wire–powder–arc additive manufacturing: a viable strategy to fabricate carbide ceramic/aluminum alloy multi-material structures
41. Straffelini · 2015 · 85
42. Bockris · 1992 · 1610.1007/978-1-4615-3376-4 ↗
43. Comparison of electrochemical methods for the evaluation of cast AZ91 magnesium alloy10.3390/ma9110925 ↗
44. Electrochemical impedance spectroscopy for the measurement of the corrosion rate of magnesium alloys: brief review and challenges10.3390/met10060775 ↗
45. Correlation of micro-galvanic corrosion behavior with corrosion rate in the initial corrosion process of dual phase steel10.1016/j.jmrt.2021.09.123 ↗
46. Review of Mg alloy corrosion rates10.1016/j.jma.2020.08.002 ↗
47. Corrosion mechanisms of magnesium alloys10.1002/(SICI)1527-2648(199909)1:1<11::AID-ADEM11>3.0.CO;2-N ↗