Anisotropic behavior of super duplex stainless steel fabricated by wire arc additive manufacturing
Source abstract
Abstract
Broadening the understanding of the anisotropic behavior of super duplex stainless steel (SDSS) fabricated by wire arc additive manufacturing (WAAM) can provide valuable insights for designing and optimizing WAAM components. The purpose of this study is to investigate the anisotropic behavior between mechanical properties, corrosion resistance, microstructure and crystallographic features of wire arc additive manufactured (WAAMed) SDSS thin-wall component, by means of optical microscopy (OM), scanning electron microscopy (SEM), electron backscatter diffraction (EBSD), X-ray diffraction (XRD), hardness testing, tensile testing and electrochemical corrosion testing. Meanwhile, a control sample set prepared from commercial hot-rolled SAF 2507 SDSS was also investigated for comparison. The results show that the mechanical properties and corrosion behaviors of WAAMed SDSS are anisotropic, which are attributed to the nonequilibrium phase ratio and anisotropic crystal features in the as-built WAAMed SDSS affected by the repeated thermal cycles inherent to WAAM process.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Additive Manufacturing Materials and Processes · Welding Techniques and Residual Stresses · Hydrogen embrittlement and corrosion behaviors in metals
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (51)
Show source-provided references
1. Super duplex stainless steels10.1179/mst.1992.8.8.685 ↗
2. In-situ duplex structure formation and high tensile strength of super duplex stainless steel produced by directed laser deposition
3. Microstructure evolution and pitting corrosion behavior of UNS S32750 super duplex stainless steel welds after short-time heat treatment10.1016/j.corsci.2017.02.006 ↗
4. Corrosion resistance of super duplex stainless steels in chloride ion containing environments: investigations by means of a new microelectrochemical method I. Precipitation-free states10.1016/S0010-938X(00)00087-1 ↗
5. Thermo-mechanical analysis of wire and arc additive layer manufacturing process on large multi-layer parts10.1016/j.commatsci.2011.06.023 ↗
6. Wire plus arc additive manufacturing10.1179/1743284715Y.0000000073 ↗
7. Current status and perspectives on wire and arc additive manufacturing (WAAM)10.3390/ma12071121 ↗
8. A review of the wire arc additive manufacturing of metals: properties, defects and quality improvement10.1016/j.jmapro.2018.08.001 ↗
9. Effects of synchronized magnetic arc oscillation on microstructure, texture, grain boundary and mechanical properties of wire arc additively manufactured Ti6Al4V alloy
10. Experimental investigations on mechanical properties of multi-layered structure fabricated by GMAW-based WAAM of SS316L10.1016/j.jmrt.2022.08.074 ↗
11. Fabrication of bulk Al-Co-Cr-Fe-Ni high-entropy alloy using combined cable wire arc additive manufacturing (CCW-AAM): microstructure and mechanical properties10.1016/j.jmst.2020.10.037 ↗
12. A short review on the corrosion behaviour of wire and arc additive manufactured materials10.3390/met13040641 ↗
13. Wire and arc additive manufacturing of 316L stainless steel/Inconel 625 functionally graded material: development and characterization10.1016/j.jmrt.2022.08.169 ↗
14. Wire and arc additive manufacturing of Fe-based shape memory alloys: microstructure, mechanical and functional behavior10.1016/j.matdes.2023.112004 ↗
15. Microstructure and mechanical properties of TOP-TIG-wire and arc additive manufactured super duplex stainless steel (ER2594)
16. Additive manufacturing of duplex stainless steels-A critical review10.1016/j.jmapro.2021.11.036 ↗
17. Liu · 2022
18. Insight into the microstructural features and corrosion properties of wire arc additive manufactured super duplex stainless steel (ER2594)
19. Decomposition kinetics of ferrite in isothermally aged SAF 2507-type duplex stainless steel10.1007/s11665-015-1793-6 ↗
20. An experimental investigation into additive manufacturing-induced residual stresses in 316L stainless steel10.1007/s11661-014-2549-x ↗
21. Microstructure and mechanical behavior of PH 13-8Mo martensitic stainless steel fabricated by wire arc additive manufacturing
22. Monitoring and flaw detection during wire-based directed energy deposition using in-situ acoustic sensing and wavelet graph signal analysis
23. Ultracold-Wire and arc additive manufacturing (UC-WAAM)
24. Element partitioning and electron backscatter diffraction analysis from feeding wire to as-deposited microstructure of wire and arc additive manufacturing with super duplex stainless steel
25. Additive manufacturing with superduplex stainless steel wire by CMT process10.3390/met10020272 ↗
26. Time-temperature-precipitation and property diagrams for super duplex stainless steel weld metals10.1007/s40194-018-0548-z ↗
27. Effects of heat accumulation on the arc characteristics and metal transfer behavior in Wire Arc Additive Manufacturing of Ti6Al4V10.1016/j.jmatprotec.2017.07.037 ↗
28. The anisotropic corrosion behaviour of wire arc additive manufactured Ti-6Al-4V alloy in 3.5% NaCl solution10.1016/j.corsci.2018.03.047 ↗
29. The study on welding HAZ microstructure of SAF 2507 duplex stainless steel by simulation tests
30. Formation of austenite in additively manufactured and post-processed duplex stainless steel alloys10.1007/s11661-019-05562-w ↗
31. Additive manufacturing of Ti-6Al-4V components by shaped metal deposition: microstructure and mechanical properties10.1016/j.matdes.2009.11.032 ↗
32. The effect of welding heat input on the structure-property relationship of a new grade super duplex stainless steel10.1002/srin.201900347 ↗
33. Microstrain and boundary misorientation evolution for recrystallized super DSS after deformation10.1016/j.matchemphys.2020.122815 ↗
34. Characterization of stainless steel parts by laser metal deposition shaping10.1016/j.matdes.2013.09.006 ↗
35. A brittle fracture mechanism in thermally aged duplex stainless steels revealed by in situ high-energy X-ray diffraction10.1016/j.msea.2018.10.025 ↗
36. Investigation of micro-electrochemical activities of oxide inclusions and microphases in duplex stainless steel and the implication on pitting corrosion10.1002/maco.201911335 ↗
37. Temperature-dependent mechanical properties of an austenitic-ferritic stainless steel studied by in situ tensile loading in a scanning electron microscope (SEM)10.1016/j.msea.2013.04.060 ↗
38. Enhancing the repassivation ability and localised corrosion resistance of an additively manufactured duplex stainless steel by post-processing heat treatment
39. Microelectrochemical investigation on pit initiation at sulfide and oxide inclusions in type 304 stainless steel10.1149/1.3033498 ↗
40. The corrosion behavior of Ti6Al4V fabricated by selective laser melting in the artificial saliva with different fluoride concentrations and pH values10.1016/j.corsci.2020.109097 ↗
41. Influence of temperature on the electrochemical and passivation behavior of 2507 super duplex stainless steel in simulated desulfurized flue gas condensates10.1016/j.corsci.2017.01.016 ↗
42. Correlation between predictive and descriptive models to characterize the passive film - study of pure chromium by electrochemical impedance spectroscopy10.1016/j.electacta.2015.05.179 ↗
43. Effect of silicon content on the corrosion properties of calcium-modified weathering steel in a chloride environment10.5006/1.3277648 ↗
44. EIS study of potentiostatically formed passive film on 304 stainless steel10.1016/j.electacta.2011.07.072 ↗
45. Determination of effective capacitance and film thickness from constant-phase-element parameters10.1016/j.electacta.2009.10.065 ↗
46. Microstructure and corrosion behavior of a novel additively manufactured maraging stainless steel10.1016/j.electacta.2020.135925 ↗
47. Improvement of pitting corrosion resistance of wire arc additive manufactured duplex stainless steel through post-manufacturing heat-treatment
48. The defining role of plastic deformation on resistance to aqueous corrosion of interstitial free steel10.1007/s11661-021-06412-4 ↗
49. A new understanding of intergranular stress corrosion cracking resistance of pipeline steel through grain boundary character and crystallographic texture studies10.1016/j.corsci.2008.10.006 ↗
50. Correlation of surface features with corrosion behaviors of interstitial free steel processed by temper rolling10.1016/j.jmst.2019.06.011 ↗
51. Effect of grain size on pitting corrosion of 304L austenitic stainless steel10.1016/j.corsci.2015.02.024 ↗