Comprehensive analysis of Sn58Bi/Cu solder joints reinforced with Mg particles: Wettability, thermal, mechanics, and microstructural characterization
Source abstract
Abstract
In this study, the Sn58Bi-xMg (x = 0, 0.2, 0.4, 0.6, 0.8, 1.0) composite solders were synthesized to explore the impact of Mg particles. The study examined the wettability, thermal properties, mechanical properties, microstructure, and growth of interfacial IMC (intermetallic compound) of composite solder. Experimental results showed that adding Mg particles had no significant impact on the melting point of Sn58Bi solder. However, increasing the Mg content increased the undercooling of the solder. Moreover, the incorporation of Mg particles resulted in a consistent rise in the coefficient of thermal expansion (CTE) of the composite solder, ranging from 11.4×10-6/°C to 15.6×10-6/°C. It was worth noting that including Mg particles enhanced the wetting ability of Sn58Bi alloy on Cu substrates. With a 0.4% addition of Mg particles, the wetting area could be increased by 60.14%, and the lowest wetting angle was approximately 10.43 °. Adding Mg particles resulted in an amelioration in the brittleness of the Bi-rich phase within the solder matrix, coupled with a decrease in both the thickness of IMC and the grain size at the joint interface. Compared to the joints without mixed Mg particles, the shear strength of Sn58Bi-0.4Mg solder joints and the microhardness of the alloy increased by 30% and decreased by 10%, respectively. Also, the presence of dimples within the fracture indicated a rise in the ductility of the solder joints. Overall, adding 0.4 wt.% Mg particles in this experiment resulted in a more effective modification of the Sn58Bi solder comprehensive properties.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Electronic Packaging and Soldering Technologies · Aluminum Alloys Composites Properties · Adhesion, Friction, and Surface Interactions
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (39)
Show source-provided references
1. Silk fibroin for flexible electronic devices10.1002/adma.201504276 ↗
2. Sustainable natural bio-origin materials for future flexible devices
3. Study on the floating kinetics of graphene in molten Sn-based alloy based on in-situ observation of X-ray radiography
4. Effects of Ni modified MWCNTs on the microstructural evolution and shear strength of Sn-3.0Ag-0.5Cu composite solder joints10.1016/j.matchar.2020.110287 ↗
5. Complex eutectic growth and Bi precipitation in ternary Sn-Bi-Cu and Sn-Bi-Ag alloys10.1016/j.jallcom.2016.09.003 ↗
6. Effect of rare earth Ce on the microstructure, physical properties and thermal stability of a new lead-free solder10.2298/JMMB1101011C ↗
7. Recent advances on SnBi low-temperature solder for electronic interconnections10.1007/s10854-021-06820-7 ↗
8. Improvement of microstructure and tensile properties of Sn–Bi–Ag alloy by heterogeneous nucleation of β-Sn on Ag3Sn
9. Improvements in mechanical properties of Sn–Bi alloys with addition of Zn and in10.1016/j.msea.2021.141131 ↗
10. Improved microstructure and mechanical properties for SnBi solder alloy by addition of Cr powders10.1016/j.jallcom.2019.03.027 ↗
11. Ultrasonic-assisted dispersion of ZnO nanoparticles to Sn-Bi solder: a study on microstructure, spreading, and mechanical properties10.1007/s11665-021-05518-5 ↗
12. Mechanical properties and microstructure evolution of Cu/Sn58Bi/Cu solder joint reinforced by B4C nanoparticles10.1016/j.jmrt.2023.01.077 ↗
13. A review of nano-carbon based molecularly imprinted polymer adsorbents and their adsorption mechanism10.1016/S1872-5805(20)60503-0 ↗
14. Effect of Ni and TiO2 particle addition on the wettability and interfacial reaction of Sn20Bi lead-free solder10.1007/s10854-021-07531-9 ↗
15. Enhancement of structure and properties of Sn58Bi solder by AlN ceramic particles10.1016/j.jmrt.2022.06.001 ↗
16. Young's equation revisited
17. Suraya MT Investigating the effect of isothermal aging on the morphology and shear strength of Sn-5Sb solder reinforced with carbon nanotubes10.1016/j.jallcom.2015.07.036 ↗
18. Microstructure evolution and hardness of MWCNT-reinforced Sn-5Sb/Cu composite solder joints under different thermal aging conditions10.1016/j.microrel.2020.113681 ↗
19. Microstructure and in situ observations of undercooling for nucleation of β-Sn relevant to lead-free solder alloys10.1007/s11664-010-1080-0 ↗
20. Effect of Ag content on the microstructure of Sn-Ag-Cu based solder alloys10.1108/09540910810902651 ↗
21. Lattice parameters, densities, expansion coefficients and perfection of structure of Cu and of Cu–In α phase10.1107/S0567739469001549 ↗
22. Shear strength and fracture behavior of reflowed Sn3.0Ag0.5Cu/Cu solder joints under various strain rates10.1016/j.jallcom.2016.08.168 ↗
23. Microstructure evolution in Sn–Bi and Sn–Bi–Cu solder joints under thermal aging10.1016/S0254-0584(01)00298-X ↗
24. A data-driven framework to predict the morphology of interfacial Cu6Sn5 IMC in SAC/Cu system during laser soldering10.1016/j.jmst.2019.12.036 ↗
25. Morphology and orientation evolution of Cu6Sn5 grains on (001) Cu and (011) Cu single crystal substrates under temperature gradient10.1016/j.jmst.2021.03.065 ↗
26. Effect of Co addition into Ni film on shear strength of solder/Ni/Cu system: experimental and theoretical investigations
27. Binary heterogeneous nucleation at a non-uniform surface10.1016/0021-8502(92)90017-P ↗
28. Microstructure evolution and shear fracture behavior of aged Sn3Ag0.5Cu/Cu solder joints10.1016/j.msea.2016.07.071 ↗
29. Rational design, synthesis, adsorption principles and applications of metal oxide adsorbents: a review10.1039/C9NR09274A ↗
30. Ultrasonic-assisted connection of Cu/Cu structure using Sn58Bi solder enhanced by B4C nanoparticles10.1016/j.jmatprotec.2023.118062 ↗
31. Microstructure evolution and thermal, wetting, mechanical properties of SiC nanowires reinforced SAC105 composite solder10.1016/j.intermet.2022.107816 ↗
32. Impact of different isothermal aging conditions on the IMC layer growth and shear strength of MWCNT-reinforced Sn–5Sb solder composites on Cu substrate10.1016/j.jallcom.2019.151714 ↗
33. Interfacial evolution of pure Sn solder bearing silicon carbide nanowires under isothermal aging and thermal cycling10.1016/j.jmrt.2021.10.022 ↗
34. Interfacial reaction, shear behavior and microhardness of Cu-Sn TLP bonding joints bearing CuZnAl powder for 3D packaging10.1016/j.jmapro.2021.06.073 ↗
35. Effects of minor Cu and Zn additions on the thermal, microstructure and tensile properties of Sn–Bi-based solder alloys10.1016/j.jallcom.2014.06.015 ↗
36. Growth mechanism of intermetallic compound and mechanical properties of nickel (Ni) nanoparticle doped low melting temperature tin–bismuth (Sn–Bi) solder10.1007/s10854-015-3817-2 ↗
37. Effect of adding 0.5wt% ZnO nanoparticles, temperature and strain rate on tensile properties of Sn–5.0wt% Sb–0.5wt% Cu (SSC505) lead free solder alloy10.1016/j.msea.2016.01.081 ↗
38. Inhibition of electromigration in eutectic SnBi solder interconnect by plastic prestraining10.1016/S1005-0302(11)60188-6 ↗
39. An alternative physical explanation of the Hall–Petch relation10.1016/j.actamat.2003.10.002 ↗