Effect of annealing treatments on microstructure, tensile and wear properties of cold-rolled FeCoCrNiMn high entropy alloy
Source abstract
Abstract
The equiatomic FeCoCrNiMn is a highly studied high-entropy alloy (HEA) known for its exceptional properties. In this study, FeCoCrNiMn HEAs with varying grain sizes were prepared by heavy cold rolling and subsequent annealing at 900 °C for different durations. Ultrafine-grained sample with an average grain size of about 0.75 μm was obtained after annealing for 2 min, which displayed an enhanced strength-ductility combination with a yield strength of around 620 MPa, an ultimate strength of around 778 and a tensile elongation of over 30 %. Grain boundary strengthening contributed significantly to the mechanical strength of the resulting alloy. The grain size of the alloy increased with annealing times, aligning well with the linear Hall-Petch relationship, and the processed HEA demonstrated the expected strength-ductility trade-off. The ultrafine-grained sample exhibited improved wear performance with reduced wear rate and improved worn surface characteristics compared to the coarser-grained samples. The wear mechanism of the FeCoCrNiMn alloy primarily involved abrasive wear and oxidative wear.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: High Entropy Alloys Studies · High-Temperature Coating Behaviors · Advanced materials and composites
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (32)
Show source-provided references
1. Nanostructured high-entropy alloys with multiple principal elements: novel alloy design concepts and outcomes10.1002/adem.200300567 ↗
2. Evaluation of the mechanical properties of the heat treated FeCrCuMnNi high entropy alloy10.1016/j.matchemphys.2018.09.033 ↗
3. Sluggish diffusion in Co-Cr-Fe-Mn-Ni high-entropy alloys10.1016/j.actamat.2013.04.058 ↗
4. Nanoscale origins of the damage tolerance of the high-entropy alloy CrMnFeCoNi10.1038/ncomms10143 ↗
5. Microstructural development in equiatomic multicomponent alloys10.1016/j.msea.2003.10.257 ↗
6. Microstructural evolution after thermomechanical processing in an equiatomic, single-phase CoCrFeMnNi high-entropy alloy with special focus on twin boundaries10.1016/j.intermet.2014.05.014 ↗
7. A fracture-resistant high-entropy alloy for cryogenic applications10.1126/science.1254581 ↗
8. Effect of annealing on mechanical properties of a nanocrystalline CoCrFeNiMn high-entropy alloy processed by high-pressure torsion10.1016/j.msea.2016.08.118 ↗
9. Strengthening mechanism in two-phase FeCoCrNiMnAl high entropy alloy coating10.1016/j.apsusc.2020.147205 ↗
10. Effect of Ti and C additions on the microstructure and mechanical properties of the FeCoCrNiMn high-entropy alloy10.1016/j.msea.2018.02.040 ↗
11. Hardness and strength enhancements of CoCrFeMnNi high-entropy alloy with Nd doping10.1016/j.msea.2019.138192 ↗
12. Role of recrystallization and second phases on mechanical properties of (CoCrFeMnNi)95.2Al3.2Ti1.6 high entropy alloy10.1016/j.msea.2021.141249 ↗
13. CoCrFeMnNi high-entropy alloys reinforced with Laves phase by adding Nb and Ti elements10.1557/jmr.2018.468 ↗
14. Effect of annealing on microstructure and mechanical properties of an ultrafine-structured Al-containing FeCoCrNiMn high-entropy alloy produced by severe cold rolling10.1016/j.msea.2020.139446 ↗
15. Unveiling the strengthening mechanisms of as-cast micro-alloyed CrMnFeCoNi high-entropy alloys10.1016/j.jallcom.2023.170443 ↗
16. Microstructure and properties of a CoCrFeNiMn high-entropy alloy processed by equal-channel angular pressing10.1016/j.msea.2017.08.083 ↗
17. Enhanced strength and ductility of bulk CoCrFeMnNi high entropy alloy having fully recrystallized ultrafine-grained structure10.1016/j.matdes.2017.07.054 ↗
18. Decomposition of the single-phase high-entropy alloy CrMnFeCoNi after prolonged anneals at intermediate temperatures10.1016/j.actamat.2016.04.005 ↗
19. Nanostructured oxide-dispersion-strengthened CoCrFeMnNi high-entropy alloys with high thermal stability10.1002/adem.202100291 ↗
20. Mechanical properties and stacking fault energies of NiFeCrCoMn high-entropy alloy10.1007/s11837-013-0771-4 ↗
21. Effective strengthening and toughening in high entropy-alloy by combining extrusion machining and heat treatment10.1016/j.scriptamat.2022.114630 ↗
22. Grain-boundary strengthening in nanocrystalline chromium and the Hall–Petch coefficient of body-centered cubic metals10.1016/j.scriptamat.2012.09.025 ↗
23. Grain growth and the Hall–Petch relationship in a high-entropy FeCrNiCoMn alloy10.1016/j.scriptamat.2012.12.002 ↗
24. Temperature dependence of the Hall–Petch relationship in CoCrFeMnNi high-entropy alloy10.1016/j.jallcom.2019.07.357 ↗
25. Statistically stored, geometrically necessary and grain boundary dislocation densities: microstructural representation and modelling
26. Non-equivalence contribution of geometrically necessary dislocation and statistically stored dislocation in work-hardened metals10.1016/j.msea.2022.142728 ↗
27. Effect of load on friction and wear behaviors of alumina matrix ceramic guideway materials10.1016/j.jallcom.2018.01.395 ↗
28. A tribological investigation of SLM fabricated TC4 titanium alloy with carburization pre-treatment10.1016/j.ceramint.2019.10.004 ↗
29. Microstructural characterization of mechanically mixed layer and wear debris in sliding wear of an Al alloy and an Al based composite10.1016/S0043-1648(00)00475-0 ↗
30. A study on novel AISI 304 stainless steel matrix composites reinforced with (Nb0.75,Ti0.25)C10.1016/j.wear.2017.12.011 ↗
31. Effect of grain size on corrosion: a review10.5006/1.3462912 ↗
32. Effect of heat treatment on microstructure and tribological behavior of Ti–6Al–4V alloys fabricated by selective laser melting10.1016/j.triboint.2021.106996 ↗