journal article·2024-01Open access

Magnificent tensile strength and ductility synergy in a NiCoCrAlTi high-entropy alloy at elevated temperature

Hongmin Zhang, Haoyan Meng, Fanchao Meng, Yang Tong, Peter K. Liaw, Xiao Yang, Lei Zhao, Haizhou Wang, Yanfei Gao, Shuying Chen

Abstract

The study reported a novel L12-strengthening NiCoCrAlTi high-entropy alloy (HEA) with an outstanding synergy of tensile strength and ductility at both ambient and high temperatures. The HEA was prepared by arc melting and cold-rolling, followed by isothermal aging at designed precipitation temperatures to achieve coexistence of recrystallized and non-recrystallized grains. Transmission electron microscopy (TEM) characterization revealed a high density of rod-like and spheroidal L12 precipitates distributing in the micro/nanograins and non-recrystallized regions in the annealed specimens. The yield stress, ultimate tensile stress, and ductility of the HEA were ∼1300 MPa, 1610 MPa, and 14 % at room temperature, respectively. Such excellent mechanical properties of ∼1060 MPa, 1271 MPa, and 25 % were maintained to 600 °C, which was superior to most reported HEAs and Co- and Ni-based superalloys to date. Systematic TEM analysis unveiled at low strain, the deformation mechanism was mainly controlled by dislocations and stacking faults (SFs). With the increase in strain, the deformation mode gradually transferred to dislocations, deformation twins (DTs), and SFs. Moreover, the complex interaction between SFs and L12 precipitates, including the shearing and blocking effects, was frequently observed, contributing to the high tensile strength. Thus, the extremely high tensile strength and sustained ductility at 600 °C mainly originate from the cooperation among interaction between L12 precipitation and dislocations and extensive SFs, DTs, immobile Lomer-Cottrell (L-C) locks formed from interactions between SFs and SFs/DTs, hierarchical SFs/DTs networks, as well as hetero-deformation-induced strengthening. Such a unique deformation mechanism breaks the strength-ductility trade-off of the HEA at high temperatures.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: High Entropy Alloys Studies · High-Temperature Coating Behaviors · Advanced Materials Characterization Techniques

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (47)

Show source-provided references
1. Prog, Microstructures and properties of high-entropy
2. Mechanical behavior of high-entropy alloys10.1016/j.pmatsci.2021.100777 ↗
3. Characterization of the microscale/nanoscale hierarchical microstructure of an as-cast CrMnFeNiCu high-entropy alloy with promising mechanical properties10.1016/j.jallcom.2023.170091 ↗
4. Hierarchical structured as-cast CrFeNiMn0.5Cu0.5 high entropy alloy with excellent tensile strength/ductility properties10.1016/j.scriptamat.2021.114473 ↗
5. Formation of dendrites and strengthening mechanism of dual-phase Ni36Co30Fe11Cr11Al6Ti6 HEA by directional solidification10.1016/j.jallcom.2023.169806 ↗
6. High-entropy alloys: potential candidates for high-temperature applications - an overview10.1002/adem.201700645 ↗
7. A review on fundamental of high entropy alloys with promising high–temperature properties10.1016/j.jallcom.2018.05.067 ↗
8. Compressive vs. tensile yield and fracture toughness behavior of a body-centered cubic refractory high-entropy superalloy Al0.5Nb1.25Ta1.25TiZr at temperatures from ambient to 1200°C10.1016/j.actamat.2022.118620 ↗
9. A eutectic high-entropy alloy with good high-temperature strength-plasticity balance10.1080/21663831.2019.1650130 ↗
10. Microstructure evolution and mechanical properties of (CoCrNi)90(AlTiZr)5(CuFeMo)5 multicomponent alloy: a pathway through multicomponent alloys toward new superalloys10.1016/j.jallcom.2020.158412 ↗
11. The interaction and migration of deformation twin in an eutectic high-entropy alloy AlCoCrFeNi2.110.1016/j.jmst.2018.09.067 ↗
12. A novel bulk eutectic high-entropy alloy with outstanding as-cast specific yield strengths at elevated temperatures10.1016/j.scriptamat.2021.114132 ↗
13. AlCoCrFeNi1.9(Mo, Nb, Hf, C) high entropy alloy strengthened by a novel long-period stacking ordered (LPSO) structure and (Nb, M)C (M = Mo, Hf, Cr)10.1016/j.matlet.2021.130646 ↗
14. Precipitation-hardened high-entropy alloys for high-temperature applications: a critical review10.1557/mrs.2019.255 ↗
15. The high temperature tensile and creep behaviors of high entropy superalloy10.1038/s41598-017-13026-7 ↗
16. Control of nanoscale precipitation and elimination of intermediate-temperature embrittlement in multicomponent high-entropy alloys10.1016/j.actamat.2020.02.059 ↗
17. Towards superior mechanical properties of hetero-structured high-entropy alloys via engineering multicomponent intermetallic nanoparticles10.1016/j.scriptamat.2020.03.023 ↗
18. Interfacial nanophases stabilize nanotwins in high-entropy alloys10.1016/j.actamat.2019.12.010 ↗
19. Superior high-temperature properties and deformation-induced planar faults in a novel L12-strengthened high-entropy alloy10.1016/j.actamat.2020.02.028 ↗
20. Designing nanoparticles-strengthened high-entropy alloys with simultaneously enhanced strength-ductility synergy at both room and elevated temperatures10.1016/j.actamat.2022.118216 ↗
21. Strong and ductile FeNiCoAl-based high-entropy alloys for cryogenic to elevated temperature multifunctional applications10.1016/j.actamat.2022.118449 ↗
22. Including stacking fault energy into the resisting stress model for creep of particle strengthened alloys10.1016/0036-9748(82)90254-X ↗
23. High density of strong yet deformable intermetallic nanorods leads to an excellent room temperature strength-ductility combination in a high entropy alloy10.1016/j.actamat.2021.117234 ↗
24. Mechanisms for suppressing discontinuous precipitation and improving mechanical properties of NiAl-strengthened steels through nanoscale Cu partitioning10.1016/j.actamat.2020.116561 ↗
25. Heterostructured materials10.1016/j.pmatsci.2022.101019 ↗
26. Tensile deformation of a nickel-base alloy at elevated temperatures10.1007/s11665-007-9189-x ↗
27. Tensile deformation behavior and microstructure evolution of Ni-based superalloy 61710.1016/j.jnucmat.2014.08.003 ↗
28. Study of anisotropic material behavior for inconel 625 alloy at elevated temperatures
29. Davis · 2000
30. Tensile properties and temperature-dependent yield strength prediction of GH4033 wrought superalloy10.1016/j.msea.2016.08.105 ↗
31. Tensile behaviour of Co–Al–W–Ta–B–Mo alloys with a coherent γ/γ’ microstructure at room and high temperatures10.1016/j.msea.2015.04.018 ↗
32. A novel L12-strengthened multicomponent Co-rich high-entropy alloy with both high γ’-solvus temperature and superior high-temperature strength10.1016/j.scriptamat.2021.113826 ↗
33. Temperature dependence of the mechanical properties of equiatomic solid solution alloys with face-centered cubic crystal structures10.1016/j.actamat.2014.08.026 ↗
34. Microstructure and mechanical properties of precipitate strengthened high entropy alloy Al10Co25Cr8Fe15Ni36Ti6 with additions of hafnium and molybdenum10.3390/e21020169 ↗
35. High-temperature tensile strength of Al10Co25Cr8Fe15Ni36Ti6 compositionally complex alloy (high-entropy alloy)10.1007/s11837-015-1484-7 ↗
36. Tensile properties of an AlCrCuNiFeCo high-entropy alloy in as-cast and wrought conditions10.1016/j.msea.2011.11.045 ↗
37. Temperature-dependent mechanical behavior of an Al0.5Cr0.9FeNi2.5V0.2 high-entropy alloy10.1063/5.0064821 ↗
38. Deformation mechanisms of Al0.1CoCrFeNi at elevated temperatures
39. Superior strength-ductility synergy and strain hardenability of Al/Ta co-doped NiCoCr twinned medium entropy alloy for cryogenic applications10.1016/j.actamat.2021.117288 ↗
40. A high-entropy alloy with dislocation-precipitate skeleton for ultrastrength and ductility10.1016/j.actamat.2022.117975 ↗
41. The influences of temperature and microstructure on the tensile properties of a CoCrFeMnNi high-entropy alloy10.1016/j.actamat.2013.06.018 ↗
42. Theory of twin strengthening in fcc high entropy alloys10.1016/j.actamat.2021.117119 ↗
43. Effects of temperature on mechanical properties and deformation mechanisms of the equiatomic CrFeNi medium-entropy alloy10.1016/j.actamat.2020.11.012 ↗
44. Tensile behaviors and deformation mechanisms of a nickel-base single crystal superalloy at different temperatures10.1016/j.msea.2014.01.001 ↗
45. Hirth · 1982
46. Strong strain hardening in nanocrystalline nickel10.1103/PhysRevLett.103.205504 ↗
47. Real-time observations of TRIP-induced ultrahigh strain hardening in a dual-phase CrMnFeCoNi high-entropy alloy