journal article·2024-01Open access

The positive contribution of Cr2O3 reinforcing nanoparticles to enhanced corrosion and tribomechanical performance of Ni–Mo alloy layers electrodeposited from a citrate-sulfate bath

Mir Saman Safavi, Ali Rasooli

Abstract

The service lifetime and efficiency of the engineering materials can be enhanced by adopting an appropriate surface modification strategy. This work has endeavored to finish the surface of St37 steel by electrodeposited Ni–Mo alloy layers strengthened by various levels of suspended Cr2O3 nanoparticles in the bath, i.e., 0–8 g/L, to obtain high corrosion and tribomechanical performance. The phase structure, morphology, chemistry, and roughness of the surfaces were assessed by XRD, FESEM, EDS, and AFM, respectively. Corrosion performance of the developed films was measured using OCP, EIS, and potentiodynamic polarization techniques, as well as long-term immersion in the corrosive NaCl medium. Vickers microhardness tester and ball-on-disk tribometer were employed to evaluate the tribomechanical behavior of the coatings. While there is no change in the phase structure of the Ni–Mo alloy layer with the included Cr2O3 nanoparticles, the nanocomposite layers show a more compact and rougher surface. The microhardness of the alloy coating was enhanced by approx. 30 % with the inclusion of the 8 g/L Cr2O3 nanoparticles in the electrolyte. An increase in polarization resistance of the nanocomposite layers compared to alloy one, by 16 kΩ, demonstrated the improvement in the corrosion protection performance with the included nanoparticles. The Ni–Mo–Cr2O3 nanocomposite layers offered lower COF and wear mass loss than the Ni–Mo alloy layer, irrespective of Cr2O3 loadings. The surface modification of mild steels by the Ni–Mo–Cr2O3 nanocomposite films can promote their service lifetime and efficiency in severe industrial applications.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Electrodeposition and Electroless Coatings · Corrosion Behavior and Inhibition · Metal and Thin Film Mechanics

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (71)

Show source-provided references
1. Electrodeposited Ni-Co alloy-particle composite coatings: a comprehensive review10.1016/j.surfcoat.2019.125153 ↗
2. Surface modification of titanium and titanium alloys: technologies, developments, and future interests10.1002/adem.202070017 ↗
3. RF-magnetron sputter deposited hydroxyapatite-based composite & multilayer coatings: a systematic review from mechanical, corrosion, and biological points of view10.1016/j.ceramint.2020.09.274 ↗
4. Electrodeposited hydroxyapatite-based biocoatings: recent progress and future challenges10.3390/coatings11010110 ↗
5. A facile and cost-effective practical approach to develop clinical applications of NiTi: fenton oxidation process10.1080/00202967.2020.1802104 ↗
6. Recent natural corrosion inhibitors for mild steel: an overview10.1155/2016/6208937 ↗
7. Microstructure, crystallographic texture, and mechanical properties of friction stir welded mild steel for shipbuilding applications10.3390/ma15082905 ↗
8. Electrodeposition of Ni-P/Ni-Co-Al2O3 duplex nanocomposite coatings: towards improved mechanical and corrosion properties10.1080/00202967.2020.1802106 ↗
9. The corrosion behavior of Ni–Fe and Ni–Fe–TiC nanoparticles deposited using pulse electrodeposition on low-carbon steel10.1007/s41779-022-00747-w ↗
10. Influence of particle size and content on the friction and wear behaviors of as-annealed Ni–Mo/diamond composite coatings
11. Optimization of plating process and corrosion behavior of nanocrystalline Ni-Mo coatings on pure aluminum10.1016/j.colsurfa.2021.128128 ↗
12. Influence of post− deposition heat treatment on the properties of electrodeposited Ni− Mo alloy coatings10.1016/j.apsusc.2018.08.160 ↗
13. Electrodeposited Co-P alloy and composite coatings: a review of progress towards replacement of conventional hard chromium deposits10.1016/j.surfcoat.2021.127564 ↗
14. Preparation and investigation of pulse co-deposited duplex nanoparticles reinforced Ni-Mo coatings under different electrodeposition parameters10.1016/j.ceramint.2022.06.217 ↗
15. Study on corrosion behavior of Ni-P/Ni-Cu-P superhydrophobic composite coatings preparation on L360 steel by two-step method10.1016/j.jmrt.2023.01.224 ↗
16. Effect of current density and agitation modes on the structural and corrosion behavior of Ni/diamond composite coatings10.1016/j.jmrt.2021.03.084 ↗
17. Efficient fabrication and characterization of Ni-Fe-WC composite coatings with high corrosion resistance10.1016/j.jmrt.2021.11.145 ↗
18. Effect of CeO2 on microstructure and properties of Ni-Co-based coatings10.1016/j.jmrt.2023.09.108 ↗
19. Estimation of microhardness and crystal grain size values of electrodeposited Ni-B/TiC nanocomposite coatings by artificial neural networks (ANN) method10.1016/j.jallcom.2023.171677 ↗
20. Investigation of the properties of Ni–B/TiC nanocomposite coatings produced at different particle concentrations by electrodeposition10.1007/s11661-023-07020-0 ↗
21. Comparing corrosion behavior of Ni and Ni-Mo electroplated coatings in chloride mediums10.1016/j.colsurfa.2020.124654 ↗
22. Microstructure and properties of nanocrystalline Ni-Mo coatings prepared by ultrasound-assisted pulse electrodeposition10.1007/s11665-021-05570-1 ↗
23. Electrodeposition of nanocrystalline Ni-Mo alloys in pyrophosphate baths10.1016/j.jallcom.2022.166407 ↗
24. Removal of hexavalent chromium from aqueous solutions by D301, D314 and D354 anion-exchange resins10.1016/j.jhazmat.2008.04.041 ↗
25. Corrosion inhibiting action of Ni-Mo alloy coatings in the presence of mixed metal oxide nanocomposites10.1039/C8NJ01695J ↗
26. Alternative tribological coatings to electrodeposited hard chromium: a critical review10.1080/00202967.2020.1776962 ↗
27. Enhanced performance of electrodeposited Ni-SiC plating as an alternative to electroplated chromium deposits: the effect of pulse duty cycle10.1088/2051-672X/ac5503 ↗
28. Ni-P-TiO2 nanocomposite coatings with uniformly dispersed Ni3Ti intermetallics: effects of TiO2 nanoparticles concentration10.1080/02670844.2018.1564475 ↗
29. Feasible strategies for promoting the mechano-corrosion performance of Ni-Co based coatings: which one is better?10.1016/j.surfcoat.2021.127337 ↗
30. A promising horizon in mechanical and corrosion properties improvement of Ni-Mo coatings through incorporation of Y2O3 nanoparticles10.1007/s11661-019-05559-5 ↗
31. Electrodeposited Ni-Fe-Cr2O3 nanocomposite coatings: a survey of influences of Cr2O3 nanoparticles loadings in the electrolyte10.1016/j.jallcom.2020.153725 ↗
32. Perspectives in corrosion-performance of Ni-Cu coatings by adding Y2O3 nanoparticles10.1080/02670844.2020.1715543 ↗
33. Development of continuous compositional gradient Ni-W coatings utilizing electrodeposition for superior wear resistance under sliding contact10.1016/j.surfcoat.2022.128728 ↗
34. Effect of oxygen in surface layers formed during sliding wear of Ni-ZrO2 coatings10.1016/j.surfcoat.2022.128174 ↗
35. Electrochemical corrosion behavior of Ni-TiO2 composite coatings electrodeposited from a deep eutectic solvent-based electrolyte10.3390/coatings12060800 ↗
36. Electrodeposition of Co-P coatings reinforced by MoS2+Y2O3 hybrid ceramic nanoparticles for corrosion-resistant applications: influences of operational parameters10.1007/s11661-020-05987-8 ↗
37. Erosion-corrosion of electrodeposited superhydrophobic Ni-Al2O3 nanocomposite coatings under jet saline-sand slurry impingement
38. Ni-SiC composite coatings with improved wear and corrosion resistance synthesized via ultrasonic electrodeposition10.1016/j.ceramint.2020.12.076 ↗
39. Improvement in the properties of nickel by nano-Cr2O3 incorporation10.1016/j.surfcoat.2010.06.004 ↗
40. Preparation of nanocrystalline Ni-Mo and Ni-Mo-ZrO2 coating and investigation of its corrosion resistance and wear behaviors10.1016/j.ceramint.2022.08.286 ↗
41. The effect of heat treatment on the microstructural changes in electrodeposited Ni-Mo coatings10.1016/j.jmatprotec.2019.116397 ↗
42. Investigations on the influence of annealing on microstructure and mechanical properties of electrodeposited Ni-Mo and Ni-Mo-W alloy coatings10.3390/coatings11111428 ↗
43. Development of corrosion-resistant Ni-Mo coatings from low-concentration bath: effect of magnetoconvection10.1080/02670836.2021.1987696 ↗
44. Effect of TiO2 on electrocatalytic behavior of Ni-Mo alloy coating for hydrogen energy10.1016/j.mset.2018.06.003 ↗
45. The effect of pulse electroplating on Zn-Ni alloy and Zn-Ni-Al2O3 composite coatings10.1016/j.jallcom.2014.11.025 ↗
46. Electrodeposition based preparation of Zn–Ni alloy and Zn–Ni–WC nano-composite coatings for corrosion-resistant applications10.3390/coatings11060712 ↗
47. Effect of multiple dissimilar nanoparticles in Ni-W alloy matrix composite coating and evaluation of surface-mechanical, corrosion, and hydrophobic properties10.1016/j.matchemphys.2021.125585 ↗
48. Study on wear resistance and corrosion resistance of zirconium phenylphosphonate reinforced Ni-W composite coating10.1016/j.apsusc.2022.154483 ↗
49. Synthesis of Ni-Fe and Ni-Fe/ZrO2 composite coating and evaluation of its structural and corrosion resistance10.1016/j.matchemphys.2019.122595 ↗
50. A review of electrodeposited composite coatings with Ni-B alloy matrix10.1088/2053-1591/ab1811 ↗
51. Mechanical properties and corrosion resistance of Ni-Co-SiC composite coatings by magnetic field-induced jet electrodeposition10.1016/j.jallcom.2019.03.391 ↗
52. Effect of electrodeposition conditions on the properties of Cu–Si3N4 composite coatings10.1016/j.apsusc.2014.02.021 ↗
53. Electrochemical deposition of Ni–TiN nanocomposite coatings and the effect of sodium dodecyl sulphate surfactant on the coating properties10.1007/s12034-016-1238-3 ↗
54. Effects of ultrasonic agitation prior to deposition and additives in the bath on electrodeposited Ni-B/hBN composite coatings10.1016/j.jallcom.2018.05.312 ↗
55. Effect of trimethylamine borane (TMAB) bath concentration on electrodeposited Ni–B/TiC nanocomposite coatings10.1016/j.ceramint.2023.05.092 ↗
56. Influence of SiC particle size on the structure and tribological properties of Ni–Co composites10.1016/j.surfcoat.2007.05.078 ↗
57. Cr2O3 nanoparticles: a promising candidate to improve the mechanical properties and corrosion resistance of Ni-Co alloy coatings10.1016/j.ceramint.2018.01.044 ↗
58. Influence of molybdenum on the mechanical properties, electrochemical corrosion and wear behavior of electrodeposited Ni-Mo alloy10.1016/j.surfcoat.2019.04.059 ↗
59. Approximation of crystallite size and microstrain via XRD line broadening analysis in TiSiN thin films10.1016/j.vacuum.2011.10.011 ↗
60. Establishing relationships between bath composition and the properties of amorphous Ni-Mo alloys obtained by electrodeposition
61. A study on pulse plating amorphous Ni-Mo alloy coating used as HER cathode in alkaline medium10.1016/j.ijhydene.2010.03.093 ↗
62. Characterization and corrosion resistance of electrodeposited Ni–Mo–silicate platelet nanocomposite coatings10.1016/j.surfcoat.2014.10.036 ↗
63. Electrodeposition of NiP composite coatings: a review10.1016/j.surfcoat.2019.07.027 ↗
64. Electrodeposition and characterization of Ni-Mo-ZrO2 composite coatings10.1016/j.apsusc.2016.02.086 ↗
65. Preparation, corrosion, and wear resistance of Ni‐Mo/Al composite coating reinforced with Al particles10.1016/j.matdes.2016.08.019 ↗
66. Investigations on the structure and properties of nanocrystalline Ni-Mo alloy coatings10.1016/j.matchar.2020.110532 ↗
67. Design and properties investigation of NiMo composite coating reinforced with duplex nanoparticles10.1016/j.surfcoat.2019.02.016 ↗
68. Modelling and optimization of microhardness of electroless Ni-P-TiO2 composite coating based on machine learning approaches and RSM10.1016/j.jmrt.2021.03.063 ↗
69. Electrodeposition of Ni-Mo/Al2O3 nano-composite coatings at various deposition current densities10.1016/j.apsusc.2018.10.073 ↗
70. Alkyl carboxylates as efficient and green inhibitors of magnesium alloy ZE41 corrosion in aqueous salt solution10.1016/j.corsci.2014.04.052 ↗
71. Electrodeposition of Ni-Mo and Ni-Mo-(nano Al2O3) multilayer coatings10.1080/02670844.2017.1327009 ↗