journal article·2024-03Open access

The formation of η-Ni3Ti phase microstructure in a cast nickel-based superalloy with high Ti/Al ratio

Kunlei Hou, Meiqiong Ou, Weiwei Xing, Guangcai Ma, Xianchao Hao, Min Wang, Yingche Ma

Abstract

By over-aging at 900 °C and 1000 °C, a high volume-fraction of η-Ni3Ti phase was prepared in a cast nickel-based superalloy with high Ti/Al ratio. EBSD analysis shows that the η phase obeys a SN-type orientation relationship with γ matrix: <11 2¯ 0>η//<1 1¯ 0>γ, {0001}η//{111}γ. Four kinds of η phase variants with a 70.5° misorientation to each other are clarified. From the η/γ interface structure as detected by HRTEM, the thin plate-like morphology of η phase is attributed to the preferential growth of the incoherent {11 2¯ 0}η//{1 1¯ 0}γ interface. The formation of η phase at the grain boundary (GB) was by a discontinuous precipitation reaction, during which the original GB migrates from the η-nucleating side into the adjacent grain following the elongation of η phase to form a cellular structure. The detailed GB migration mechanism is investigated by EBSD and rationalized from the aspect of interface energy. For the formation of η phase in grain interior, three relative reactions are clarified: (i) MC+γ→M23C6+OA-γ′, OA-γ′→η, (ii) γ→M23C6+OA-γ′, OA-γ′→η, and (iii) γ′→OA-γ′, OA-γ′→η, where OA-γ′ is the newly precipitated γ′ phase during over-aging which shares a similar elemental distribution with η. The intermediate phase OA-γ′ is formed due to the comparably low nucleation barrier from γ while its subsequent transformation to η is excited by the higher thermodynamic stability of η as revealed by the calculation results by using the VASP software. At last, as conformed by STEM-HAADF, the structure transformation of OA-γ′→η is aided by the introduce of superlattice intrinsic stacking faults.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: High Temperature Alloys and Creep · Intermetallics and Advanced Alloy Properties · Microstructure and mechanical properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (58)

Show source-provided references
1. Modelling of the influence of alloy composition on flow stress in high-strength nickel-based superalloys10.1016/j.actamat.2014.04.075 ↗
2. The role of alloying elements in the design of nickel-base superalloys10.1007/BF00549796 ↗
3. Strengthening mechanisms in γ'-precipitating alloys10.1179/msc.1970.4.1.121 ↗
4. The evolution of η phase in Ni–Co base superalloys10.1016/j.msea.2007.08.047 ↗
5. Microstructure evolution and mechanical properties of GH984G alloy with different Ti/Al ratios during long-term thermal exposure10.1016/j.matdes.2014.05.020 ↗
6. Thermal stability of a new Ni-Fe-Cr base alloy with different Ti/Al ratios10.1016/j.jmst.2014.07.008 ↗
7. Precipitate phase stability and compositional dependence on alloying additions in γ–γ′–δ–η Ni-base superalloys10.1016/j.jallcom.2014.11.155 ↗
8. Correlation between local chemical composition and formation of different types of ordered phases in the polycrystalline nickel-base superalloy A718Plus10.1002/adem.202100558 ↗
9. Investigation on the dissolution of η phase in a cast Ni-based superalloy10.1007/s12613-013-0691-x ↗
10. On the precipitation of delta phase in ALLVAC® 718Plus10.1080/14786435.2013.878052 ↗
11. Precipitation sequences in rapidly solidified Allvac 718Plus alloy during solution treatment10.1016/j.jmst.2022.03.031 ↗
12. The precipitation of η phase during the solution treatments of Allvac 718Plus10.1016/j.matchar.2021.111142 ↗
13. Phase discrimination between δ and η phases in the new nickel-based superalloy VDM Alloy 780 using EBSD
14. HRTEM analysis of the high-temperature phases of the newly developed high-temperature Ni-base superalloy VDM 780 Premium10.1016/j.jallcom.2019.152157 ↗
15. Design of an eta-phase precipitation-hardenable nickel-based alloy with the potential for improved creep strength above 1023K (750°C)10.1007/s11661-015-2898-0 ↗
16. The mechanism of η phase precipitation in A286 superalloy during heat treatment10.1007/s11665-013-0592-1 ↗
17. Age-hardening behavior and phase identification in solution-treated AEREX 350 superalloy10.1007/BF02586125 ↗
18. Grain boundary discontinuous precipitation reactions10.1179/imr.1981.26.1.153 ↗
19. The genesis of the cellular precipitation reaction10.1007/BF02652842 ↗
20. Phase precipitation and phase stability in nimonic 26310.1007/s11661-001-0217-4 ↗
21. The effect of η phase precipitates on the creep behavior of alloy 263 and variants10.1016/j.msea.2020.140337 ↗
22. The nucleation and growth of η phase in nickel-based superalloy during long-term thermal exposure10.1016/j.actamat.2019.12.038 ↗
23. Effects of cold work prior to aging on microstructure of AEREX™350 superalloy10.1016/j.msea.2007.07.052 ↗
24. The effects of Co and Ti additions on microstructures and compressive strength of Udimet71010.1016/j.msea.2011.07.019 ↗
25. Precipitation of η-Ni3(Ti, Al) phase at grain boundaries in an austenitic precipitation-strengthened stainless steel10.1007/s11661-018-5045-x ↗
26. Retarding the precipitation of η phase in Fe-Ni based alloy through grain boundary engineering10.1016/j.jmst.2020.02.018 ↗
27. Mechanism of primary MC carbide decomposition in Ni-base superalloys10.1007/s11661-004-0076-x ↗
28. Decomposition of primary MC carbide and its effects on the fracture behaviors of a cast Ni-base superalloy10.1016/j.msea.2007.07.055 ↗
29. Effect of long time service exposure on microstructure and mechanical properties of gas turbine vanes made of IN939 alloy10.1016/j.matdes.2014.08.035 ↗
30. Microstructural characterization of the η-Ni3(Ti, Al) phase in a long-term-aged Ni-based superalloy10.1080/09500839.2017.1406193 ↗
31. Effect of stacking fault segregation and local phase transformations on creep strength in Ni-base superalloys10.1016/j.actamat.2019.04.038 ↗
32. Grain-boundary precipitation in allvac 718Plus10.1016/j.actamat.2012.01.042 ↗
33. Thermodynamic stability and electronic structure of η-Ni6Nb(Al,Ti) from first principles10.1016/j.scriptamat.2014.01.012 ↗
34. Effect of the precipitation of the η-Ni3Al0.5Nb0.5 phase on the microstructure and mechanical properties of ATI 718Plus10.1016/j.jallcom.2017.01.145 ↗
35. Phase transformation strengthening of high-temperature superalloys10.1038/ncomms13434 ↗
36. Utilizing local phase transformation strengthening for nickel-base superalloys10.1038/s43246-021-00210-6 ↗
37. Segregation and η phase formation along stacking faults during creep at intermediate temperatures in a Ni-based superalloy10.1016/j.actamat.2015.08.053 ↗
38. Temperature-dependent yield strength and deformation mechanism of a casting Ni-based superalloy containing low volume-fraction γ′ phase10.1016/j.jallcom.2022.164187 ↗
39. Evaluating the microstructures and mechanical properties of dissimilar metal joints between a new cast superalloy K4750 and Hastelloy X alloy by using different filler materials10.3390/ma11102065 ↗
40. Effect of long-term aging on the microstructure, stress rupture properties and deformation mechanisms of a new cast nickel base superalloy10.1016/j.msea.2018.08.096 ↗
41. Evolution of δ phase microstructure in alloy 718
42. Precipitation of η phase and its effects on stress rupture properties of K4750 alloy10.1016/j.msea.2019.138137 ↗
43. Cellular η phase precipitation and its effect on the tensile properties in an Fe–Ni–Cr alloy10.1016/j.msea.2007.11.039 ↗
44. Effect of grain boundary misorientation on η phase precipitation in Ni-base superalloy 718Plus10.1016/j.matchar.2019.02.038 ↗
45. M23C6 precipitation behavior and grain boundary serration in Ni-based Alloy 69010.1016/j.matchar.2014.07.008 ↗
46. Grain boundary serration in nickel alloy inconel 600: quantification and mechanisms10.1016/j.actamat.2019.09.037 ↗
47. On the mechanism of serrated grain boundary formation in Ni-based superalloys10.1016/0001-6160(83)90202-X ↗
48. Effect of serrated grain boundaries on the creep property of Inconel 718 superalloy10.1016/j.msea.2011.10.014 ↗
49. Influence of composition and precipitation evolution on damage at grain boundaries in a crept polycrystalline Ni-based superalloy10.1016/j.actamat.2018.12.039 ↗
50. On phase transformations in a Ni-based superalloy10.1080/14786435.2013.773106 ↗
51. Electronic structure and phase stability of A3Ti (A=Fe, Co, Ni, and Cu)10.1103/PhysRevB.48.4276 ↗
52. Electronic structure and phase stability study in the Ni-Ti system10.1103/PhysRevB.52.15176 ↗
53. Transformation of DO24 η-Ni3Ti phase to face-centered cubic austenite during isothermal aging of an Fe–Ni–Ti alloy10.1016/j.actamat.2008.10.056 ↗
54. Study on phase transformation orientation relationship of HCP-FCC during rolling of high purity titanium
55. Role of stacking faults in martensite transformation of FeMnSiCrNi shape memory alloy subjected to plastic deformation at high temperatures10.1016/j.intermet.2020.106841 ↗
56. Stacking Fault driven phase transformation in CrCoNi medium entropy alloy10.1021/acs.nanolett.0c04244 ↗
57. Effect of boron addition on the microstructure and mechanical properties of K4750 nickel-based superalloy10.1016/j.jmst.2020.02.079 ↗
58. Effect of hafnium content on the microstructural evolution and stress rupture properties of K4750 nickel-based superalloy10.1016/j.jallcom.2022.165473 ↗