journal article·2020-05Open access

Effect of hybrid multi-walled carbon nanotube and montmorillonite nanoclay content on mechanical properties of shape memory epoxy nanocomposite

M.H. Mat Yazik, M.T.H. Sultan, Norkhairunnisa Mazlan, A. R. Abu Talib, J. Naveen, A.U.M. Shah, S.N.A. Safri

Abstract

In this study, the hybrid nanofiller of montmorillonite (MMT) and multi-walled carbon nanotube (MWCNT) were incorporated into shape memory epoxy (SMEP) at different loadings. The fillers were dispersed in the SMEP resin by sonication. Tensile and flexural properties were analyzed at room temperature (RT) and high temperature (HT). Field emission scanning electron microscopy (FE-SEM) was used to analyze the microstructure of fractured samples. The tensile results revealed that at RT, the hybrid filler nanocomposite exhibits a ductile behavior meanwhile at HT, the nanocomposite exhibits a brittle behavior. The sample with the hybrid filler loading of 3 wt% MMT and 1.0 wt% MWCNT produced maximum performance with an increase of 32.5% in the ultimate tensile strength (UTS) and 20.9% in Young’s modulus at RT. The trends of the UTS and modulus obtained in the HT tensile test were almost similar to the RT tensile test despite yielding lower value. The RT flexural test revealed an increasing flexural strength as the filler loading increased with a maximum of 176% increase for hybrid filler of 3 wt% MMT and 1.0 wt% MWCNT. This trend was also observed for the flexural strength at HT. From FE-SEM, it was observed that the SMEP nanocomposite containing 3 wt% MMT and 1.0 wt% MWCNT was well dispersed and interact with each other, producing a synergetic reinforcement towards the performance. This study demonstrates the tensile and flexural reinforcement effect of MMT and MWCNT hybrid nanofiller. Findings from this study can be utilized to select the optimum loading for mechanical requirements in various applications.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Polymer composites and self-healing · Conducting polymers and applications · Silicone and Siloxane Chemistry

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (100+)

Show source-provided references
1. Shape-memory polymers10.1016/S1369-7021(07)70047-0 ↗
2. A review - Features and benefits of shape memory polymers (SMPs)
3. Recent advances in polymer shape memory10.1016/j.polymer.2011.08.003 ↗
4. Recent advances in shape memory polymers and composites: a review10.1007/s10853-007-2176-7 ↗
5. Deployable morphing structure based on shape memory polymer10.1108/AEAT-06-2013-0118 ↗
6. Shape memory polymers and their composites in aerospace applications: a review10.1088/0964-1726/23/2/023001 ↗
7. Application of SMP composite in designing a morphing wing
8. Shape-memory behavior of thermally stimulated polyurethane for medical applications10.1002/app.25567 ↗
9. Thermoset shape memory polymers and their composites10.1177/1045389X16634211 ↗
10. Effect of MWCNT content on thermal and shape memory properties of epoxy nanocomposites as material for morphing wing skin
11. Electrical actuation properties of reduced graphene oxide paper/epoxy-based shape memory composites10.1016/j.compscitech.2014.10.016 ↗
12. Significantly reducing electrical resistivity by forming conductive Ni chains in a polyurethane shape-memory polymer/carbon-black composite10.1063/1.2931049 ↗
13. Light-induced shape-memory polymers10.1038/nature03496 ↗
14. Shape memory polymer/CNT composites and their microwave induced shape memory behaviors10.1039/C3RA43258K ↗
15. Shape-memory polymer in response to solution10.1002/adem.200800002 ↗
16. Thermo-mechanical behaviour of shape Memory Polymers, e.g., Tecoflex by 1WE method: SEM and IR analysis10.1007/s10965-011-9587-5 ↗
17. Properties of graphene/shape memory thermoplastic polyurethane composites actuating by various methods10.3390/ma7031520 ↗
18. Scott Gibson Rauscher · 2008
19. Effect of graphene addition on shape memory behavior of epoxy resins
20. Determination of shape fixity and shape recovery rate of carbon nanotube-filled shape memory polymer nanocomposites10.1016/j.proeng.2012.07.362 ↗
21. Stimulus methods of multi-functional shape memory polymer nanocomposites: a review10.1016/j.compositesa.2017.04.022 ↗
22. Stimulus-responsive shape memory materials: a review10.1016/j.matdes.2011.04.065 ↗
23. Thermally recoverable crosslinked polyethylene10.1002/(SICI)1097-4628(19970502)64:5<823::AID-APP1>3.0.CO;2-R ↗
24. Electroactive shape memory performance of polyurethane composite having homogeneously dispersed and covalently crosslinked carbon nanotubes10.1016/j.carbon.2009.12.058 ↗
25. Shape memory effect of ethylene–vinyl acetate copolymers10.1002/(SICI)1097-4628(19990214)71:7<1063::AID-APP4>3.0.CO;2-A ↗
26. Thermo-mechanical properties of polystyrene-based shape memory nanocomposites10.1039/b923238a ↗
27. Mechanical properties of shape memory polymers for morphing aircraft applications
28. Bortolin · 2005
29. Recovery as a measure of oriented crystalline structure in poly (ether ester) s based on poly (ethylene oxide) and poly (ethylene terephthalate) used as shape memory polymers10.1002/(SICI)1099-0488(19990115)37:2<101::AID-POLB1>3.0.CO;2-X ↗
30. Shape memory effect of poly (ethylene terephthalate) and poly (ethylene glycol) copolymer cross‐linked with glycerol and sulfoisophthalate group and its application to impact‐absorbing composite material10.1002/app.20903 ↗
31. Free recovery effects of shape-memory polymers for cardiovascular stents
32. Progress in shape memory epoxy resins10.1016/j.reactfunctpolym.2012.06.009 ↗
33. Recent advances in shape memory epoxy resins and composites10.1016/B978-0-323-26434-1.00027-1 ↗
34. Shape memory epoxy: composition, structure, properties and shape memory performances10.1039/b923394f ↗
35. Xie · 2013
36. Facile tailoring of thermal transition temperatures of epoxy shape memory polymers10.1016/j.polymer.2009.02.035 ↗
37. Xie · 2008
38. Thermal, mechanical and shape memory properties of shape memory epoxy resin10.1016/j.msea.2009.12.014 ↗
39. Effect of chemical composition on the deformability of shape-memory epoxies10.1002/mame.201100066 ↗
40. Thermomechanical properties of shape-memory hydro-epoxy resin10.1088/0964-1726/21/5/055022 ↗
41. Review of progress in shape memory epoxies and their composites10.3390/polym10010034 ↗
42. Evaluation of nanoparticulate fillers for development of shape memory polyurethane nanocomposites10.1016/j.polymer.2008.03.021 ↗
43. Shape memory polymers and their nanocomposites: a review of science and technology of new multifunctional materials10.1166/jnn.2008.18227 ↗
44. Tensile modulus prediction of carbon nanotubes-reinforced nanocomposites by a combined model for dispersion and networking of nanoparticles10.1016/j.jmrt.2019.10.025 ↗
45. Shape memory polymers for composites10.1016/j.compscitech.2018.03.018 ↗
46. Recent developments in shape memory polymer nanocomposites: actuation methods and mechanisms10.1016/j.ccr.2016.03.007 ↗
47. Dual responsive shape memory polymer/clay nanocomposites10.1016/j.compscitech.2016.04.008 ↗
48. Processing and property investigation of single-walled carbon nanotube (SWNT) buckypaper/epoxy resin matrix nanocomposites10.1016/j.compositesa.2003.09.029 ↗
49. . Characterization of electrical and thermal properties of carbon nanotube/epoxy composites10.1016/j.compositesb.2013.08.032 ↗
50. Carbon nanotube composites for thermal management10.1063/1.1469696 ↗
51. Helical microtubules of graphitic carbon
52. Single-shell carbon nanotubes of 1nm diameter10.1038/363603a0 ↗
53. A review of the electrical and mechanical properties of carbon nanofiller-reinforced polymer composites10.1007/s10853-018-3006-9 ↗
54. Review of applications of Polymer/Carbon nanotubes and Epoxy/CNT composites10.1080/03602559.2016.1163588 ↗
55. Electrical transducers10.1016/B978-1-4557-7631-3.00004-1 ↗
56. Facile synthesis of Mn3O4 hollow polyhedron wrapped by multiwalled carbon nanotubes as a high-efficiency microwave absorber10.1016/j.ceramint.2019.09.124 ↗
57. A multistep methodology for calculation of the tensile modulus in polymer/carbon nanotube nanocomposites above the percolation threshold based on the modified rule of mixtures10.1039/C8RA04992K ↗
58. Study of polyurethane/clay nanocomposites produced via melt intercalation method
59. Enhanced thermal stability and structural characteristics of different MMT-Clay/epoxy-nanocomposite materials10.1016/j.polymdegradstab.2007.10.005 ↗
60. Polymer-layered silicate nanocomposites: preparation, properties and uses of a new class of materials10.1016/S0927-796X(00)00012-7 ↗
61. One‐pot synthesis of nylon 6–clay hybrid10.1002/pola.1993.080310714 ↗
62. The chemistry of polymer-clay hybrids10.1016/0928-4931(95)00110-7 ↗
63. Conductive polymer nanocomposites with hierarchical multi-scale structures via self-assembly of carbon-nanotubes on graphene on polymer-microspheres10.1039/C3NR06056J ↗
64. Modeling approach for tensile strength of interphase layers in polymer nanocomposites10.1016/j.jcis.2016.03.029 ↗
65. Reinforcement and interphase of polymer/graphene oxide nanocomposites10.1039/c2jm15062j ↗
66. Simple approach for preparation of epoxy hybrid nanocomposites based on carbon nanotubes and a model clay10.1021/cm1009306 ↗
67. Fabrication and properties of clay-supported carbon Nanotube/Poly (vinyl alcohol) nanocomposites10.1002/pc.20698 ↗
68. Electrical and mechanical properties of poly(L-lactide)/carbon nanotubes/clay nanocomposites10.1166/jnn.2010.2233 ↗
69. Mechanical and electrical properties of epoxy/multi-walled carbon nanotube/nanoclay nanocomposites
70. Enhancing mechanical properties of bolted carbon/epoxy nanocomposites with carbon nanotube, nanoclay, and hybrid loading10.1016/j.compositesb.2017.07.001 ↗
71. Mechanical and viscoelastic properties of epoxy nanocomposites reinforced with carbon nanotubes, nanoclay, and binary nanoparticles10.1177/0731684417691365 ↗
72. Self-assembled montmorillonite–carbon nanotube for epoxy composites with superior mechanical and thermal properties10.1016/j.compscitech.2018.04.035 ↗
73. Shape-Memory effect from permanent shape10.1002/1521-3773(20020617)41:12<2034::AID-ANIE2034>3.0.CO;2-M ↗
74. A technical review on epoxy-clay nanocomposites: structure, properties, and their applications in fiber reinforced composites
75. The effect of sonication time and dispersing medium on the mechanical properties of multiwalled carbon nanotube (MWCNT)/epoxy composite10.1080/1023666X.2011.600517 ↗
76. D 638 standard test method for tensile properties of plastics
77. D 790 standard test method for flexural properties of unreinforced and reinforced plastics and electrical insulation materials
78. Saba · 2019 · 1
79. McKeen · 2014 · 1
80. Effect of “Z” factor for strength of interphase layers on the tensile strength of polymer nanocomposites10.1002/pc.24813 ↗
81. Physical interactions at carbon nanotube-polymer interface10.1016/j.polymer.2003.10.011 ↗
82. Tensile Properties of Hybrid Biocomposite Reinforced Epoxy Modified with Carbon Nanotube (CNT)10.15376/biores.13.1.1787-1800 ↗
83. Thermal and dynamic mechanical properties of cellulose nanofibers reinforced epoxy composites10.1016/j.ijbiomac.2017.04.074 ↗
84. Review of progress in shape-memory polymers10.1039/b615954k ↗
85. Anisotropic polymer conformations in aligned SWCNT/PS nanocomposites10.1021/acsmacrolett.5b00256 ↗
86. The role of fibre/matrix interactions on the dynamic mechanical properties of chemically modified banana fibre/polyester composites10.1016/j.compositesa.2005.09.001 ↗
87. Thermal behavior of E-glass fiber-reinforced unsaturated polyester composites10.1016/j.compositesb.2013.08.085 ↗
88. Thermal behaviour and dynamic mechanical analysis of Pennisetum purpureum/glass-reinforced epoxy hybrid composites10.1016/j.compstruct.2016.06.026 ↗
90. Gross · 2008
91. Tensile and flexural properties of a newly developed bulletproof vest using a Kenaf/X-ray film
92. Experimental study on the thermal and mechanical properties of multi-walled carbon nanotube-reinforced epoxy10.1016/j.msea.2006.11.066 ↗
93. Improving the dispersion and flexural strength of multiwalled carbon nanotubes–stiff epoxy composites through β-hydroxyester surface functionalization coupled with the anionic homopolymerization of the epoxy matrix10.1016/j.eurpolymj.2006.04.016 ↗
94. A modeling methodology to investigate the effect of interfacial adhesion on the yield strength of MMT reinforced nanocomposites10.1016/j.jiec.2018.09.039 ↗
95. Reinforcement efficiency of carbon nanotubes-myth and reality
96. Mechanical properties of multi-walled carbon nanotube/epoxy polysulfide nanocomposite10.1016/j.matdes.2013.02.039 ↗
97. The effects of multi-walled CNT in Bamboo/Glass fibre hybrid composites: tensile and flexural properties
98. Flexural testing of shape memory polymers for morphing aircraft applications
99. Effect of elevated temperatures on flexural strength of hybrid Napier / glass reinforced epoxy composites Effect of elevated temperatures on flexural strength of hybrid Napier / glass reinforced epoxy composites10.1088/1742-6596/908/1/012017 ↗
100. Mechanical and shape-memory behavior of shape-memory polymer composites with hybrid fillers10.1002/pi.2785 ↗