Effects of SiC additions on the microstructure, compressive strength and wear resistance of Sn-Sb-Cu bearing alloy formed via powder metallurgy
Source abstract
Abstract
Sn base Babbit (Sn-Sb-Cu) has become a material of choice for making sliding bearings and liners because of the anti-friction and excellent embedability properties of Sn while the intermetallics (SnSb, Cu6Sn5) act as the load bearers. However, the load bearing capacity of Sn-Sb-Cu alloy is limited in high speed and heavy load engines. In this work, Sn-Sb-Cu composites reinforced with 3, 6 and 9 wt.% of SiC were fabricated via powder metallurgy (PM) technique. The microstructure, mechanical and tribological properties of the composites were investigated using optical microscopy, scanning electron microscopy (equipped with energy dispersive spectrometer), X-ray diffraction machine, Vickers hardness tester, Instron Universal testing machine and pin-on-disk tribometer. The results were analysed and compared with that of the Sn-Sb-Cu alloy. PM technique was successfully utilised to produce fully dense Babbit alloy and composites with porosity ranging between 1.3% and 6.7%. The microstructure of the alloy revealed the presence of SnSb and Cu-rich angularly shaped phases randomly dispersed in Sn-rich matrix. The composites comprise uniformly dispersed SiC powders in the Sn-base matrix. The volumetric ratio of SnSb:Sn in the composites was found to increase as the SiC composition increased. The hardness, compressive strength and wear resistance properties of the Sn-Sb-Cu alloy increased with the increase in SiC composition. It is found that the addition of 9 wt.% SiC exhibited the highest performance with the improvement of ∼43% in hardness, ∼55% in compressive strength and ∼80% in wear resistance over the Sn-Sb-Cu alloy.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Powder Metallurgy Techniques and Materials · Advanced machining processes and optimization · Advanced materials and composites
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (29)
Show source-provided references
1. A study on the microstructures and properties of selective laser melted Babbit metals10.1007/s11665-019-04332-4 ↗
2. Indentation creep and mechanical properties of quaternary Sn–Sb based alloys10.1016/j.msea.2011.01.054 ↗
3. Corrosion behaviour of Sn-based lead-free solders in acidic solution
4. Evaluation of effect of alloy elements in copper based CuSn10 and CuZn30 bearings on tribological and mechanical properties10.1016/j.jallcom.2009.09.068 ↗
5. The effects of boron minerals on the microstructure and abrasion resistance of Babbitt metal (Sn–Sb–Cu) used as coating materials in hydroelectric power plants
6. A study on tribological behaviour of tin-based bearing material in dry sliding10.1016/j.matdes.2005.05.016 ↗
7. Effects of Ag micro-addition on structure and mechanical properties of Sn-11Sb-6Cu Babbitt10.1016/j.msea.2018.03.034 ↗
8. Influence of alloying elements on structure and some physical properties of quenched Sn-Sb alloy10.1080/10420150600825925 ↗
9. Effects of micro-additions on structures and properties of rapidly solidified Sn-10% Sb alloy10.1080/1042015031000151277 ↗
10. Effect of chemical composition on the microstructure and tribological properties of Sn-based alloys10.1007/s11665-019-04154-4 ↗
11. Investigation of characteristics of tin-based white metals as a bearing material10.1016/j.matdes.2008.07.056 ↗
12. Study of some physical properties of the rapidly solidified Sn–Sb–Cu–Zn alloys10.1016/j.matdes.2012.06.014 ↗
13. The tribological properties and the microstructure investigations of tin babbit with Pb addition after heat treatment10.1515/amm-2016-0300 ↗
14. Effect of carbon nanotubes on structure and properties of the antifriction coatings produced by plasma cladding10.1080/1536383X.2020.1712364 ↗
15. Effect of MgO, Al2O3 and FeCr2O4 on microstructure and wear resistance of Babbitt metal (Sn–Sb–Cu)10.1088/2053-1591/aaf7b4 ↗
16. Structure and properties of the B83 Babbit alloy based composite materials produced by extrusion10.1134/S2075113318030103 ↗
17. Hussain · 2013
18. Tribological characterization of Fe-Cu-Sn alloy with graphite as solid lubricant10.1108/ILT-11-2017-0337 ↗
19. A study on the phase transformation behaviour of Cu-20wt.SN alloy produced using powder metallurgy method: experimental and molecular dynamics modelling10.1016/j.physleta.2020.126418 ↗
20. Fabrication characteristics and mechanical behaviour of rice husk ash – alumina reinforced Al-Mg-Si alloy matrix hybrid composites10.1016/j.jmrt.2013.03.012 ↗
21. Phase equilibria of Sn-Sb-Cu system
22. Mechanical and wear behaviour of Mg–SiC–Gr hybrid composites10.1016/j.jma.2016.08.001 ↗
23. The effect of reinforcement amount and sintering temperature on Mg matrix composite fabricated by powder metallurgy10.30967/ijcrset.1.S1.2018.516-521 ↗
24. Mechanical alloying and sintering of nanostructured tungsten carbide-reinforced copper composite and its characterization10.1016/j.matdes.2011.02.025 ↗
25. Investigation of mechanical properties and parametric optimization of the dissimilar GTAW of AISI 304 stainless steel and low carbon steel10.1108/WJE-12-2017-0412 ↗
26. Investigation of the microstructure, mechanical and wear properties of AA6061-T6 friction stir weldments with different particulate reinforcements addition10.1016/j.jmrt.2019.06.055 ↗
27. Microstructure and wear behaviour of AA 6061/SiC surface composite fabricated via friction stir processing with different pins and passes
28. Abioye · 2014
29. Wear behaviour of friction stir weld joint of cast Al (4-10%) Cu alloy welded at different operating parameters10.1016/j.jmatprotec.2016.09.003 ↗