journal article·2022-11Open access

Nano-fiber-structured Cantor alloy films prepared by sputtering

Yuanying Yue, Xuehui Yan, Yong Zhang

Abstract

High entropy alloy films (HEAFs) have received increasing attention in recent years due to their excellent properties, such as high wear resistance, corrosion resistance, magnetic and optical properties. By using Direct Current (DC) magnetron sputtering, Cantor (CoCrFeMnNi) alloy films were deposited at various sputtering powers. The composition, microstructure, and mechanical properties of the films deposited at different sputtering powers were investigated. The Cantor alloy films deposited at various sputtering powers of 80, 100, 120 and 150 W showed a face-centered-cubic nanocrystalline structure. As sputtering power was increased, the films showed a nano-fiber-structured growth pattern and larger grain size. Hardness of the Cantor alloy film prepared at 80 W is 8.9 GPa, which is considerably higher than that of the bulk alloy of 1.4 GPa. This work indicates that the phase structure of the Cantor alloy films is consistent with that of the bulk alloy, while the microstructure is totally different showing a nano-fiber-structure and much harder than the bulk, which implies that nanostructured Cantor alloy films can be designed as high-hardness wear-resistant coatings.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: High Entropy Alloys Studies · High-Temperature Coating Behaviors · Metal and Thin Film Mechanics

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (54)

Show source-provided references
1. Additively manufactured hierarchical stainless steels with high strength and ductility10.1038/nmat5021 ↗
2. A review of mechanical properties of additively manufactured Inconel 718
3. Microstructural development in equiatomic multicomponent alloys10.1016/j.msea.2003.10.257 ↗
4. Nanostructured high-entropy alloys with multiple principal elements: novel alloy design concepts and outcomes10.1002/adem.200300567 ↗
5. Science and technology in high-entropy alloys10.1007/s40843-017-9195-8 ↗
6. Alloy design strategies and future trends in high-entropy alloys
7. A critical review of high entropy alloys and related concepts10.1016/j.actamat.2016.08.081 ↗
8. High-entropy alloys: a critical review10.1080/21663831.2014.912690 ↗
9. Deformation behavior and toughening of high-entropy alloys
10. Ultrastrong ductile and stable high-entropy alloys at small scales10.1038/ncomms8748 ↗
11. A refractory Hf25Nb25Ti25Zr25 high-entropy alloy with excellent structural stability and tensile properties10.1016/j.matlet.2014.05.134 ↗
12. A fracture-resistant high-entropy alloy for cryogenic applications10.1126/science.1254581 ↗
13. Exploring the amorphous phase formation and properties of W-Ta-(Cr, Fe, Ni) high-entropy alloy gradient films via a high-throughput technique10.1016/j.jallcom.2022.165294 ↗
14. Surface modification of plasma nitriding on AlxCoCrFeNi high-entropy alloys10.1016/j.jmst.2020.01.057 ↗
15. Surface strengthening in Al0.25CoCrFeNi high-entropy alloy by boronizing10.1016/j.matlet.2018.12.029 ↗
16. Influence of Bridgman solidification on microstructures and magnetic behaviors of a non-equiatomic FeCoNiAlSi high-entropy alloy10.1016/j.intermet.2015.08.014 ↗
17. High-entropy alloys with high saturation magnetization, electrical resistivity, and malleability
18. Discovery of a superconducting high-entropy alloy10.1103/PhysRevLett.113.107001 ↗
19. High-entropy films and compositional gradient materials
20. Microstructures and properties of high-entropy alloy films and coatings: a review10.1080/21663831.2018.1434248 ↗
21. The influences of temperature and microstructure on the tensile properties of a CoCrFeMnNi high-entropy alloy10.1016/j.actamat.2013.06.018 ↗
22. Mechanical properties of nanostructured CoCrFeNiMn high-entropy alloy (HEA) coating10.3389/fmats.2018.00041 ↗
23. Growth, microstructure and mechanical properties of CoCrFeMnNi high entropy alloy films10.1016/j.vacuum.2020.109553 ↗
24. Diffusion barrier properties of AlMoNbSiTaTiVZr high-entropy alloy layer between copper and silicon10.1016/j.tsf.2007.07.109 ↗
25. Tribological properties of FeCoCrNiAlBx high-entropy alloys coating prepared by laser cladding10.1016/S1006-706X(17)30026-2 ↗
26. Nano-crystallization of high-entropy amorphous NbTiAlSiWxNy films prepared by magnetron sputtering10.3390/e18060226 ↗
27. Structure and properties of (AlCrMoNiTi)Nx and (AlCrMoZrTi)Nx films by reactive RF sputtering10.1016/j.surfcoat.2013.08.064 ↗
28. RF magnetron sputtered AlCoCrCu0.5FeNi high entropy alloy (HEA) thin films with tuned microstructure and chemical composition10.1016/j.jallcom.2020.155348 ↗
29. Nanotwinned medium entropy alloy CoCrFeNi thin films with ultra-high hardness: modifying residual stress without scarifying hardness through tuning substrate bias10.1016/j.surfcoat.2022.128191 ↗
30. The effects of irradiation on CrMnFeCoNi high-entropy alloy and its derivatives10.1016/j.pmatsci.2021.100807 ↗
31. Tailoring strength and ductility of high-entropy CrMnFeCoNi alloy by adding Al10.1007/s12598-018-1161-4 ↗
32. CoCrFeNiMn high entropy alloy microstructure and mechanical properties after severe cold shape rolling and annealing10.1016/j.msea.2020.139884 ↗
33. Mechanical properties, microstructure and thermal stability of a nanocrystalline CoCrFeMnNi high-entropy alloy after severe plastic deformation10.1016/j.actamat.2015.06.025 ↗
34. Effect of Al addition on the microstructure and mechanical properties of Al x CrCoNi medium entropy alloys prepared via the magnetron Co-sputtering
35. Construction of magnetron sputtering non-equilibrium Miedema's model for application in Ag-Mo thin films10.1016/j.physb.2020.412541 ↗
36. The nanostructure and mechanical properties of nanocomposite Nb x -CoCrCuFeNi thin films10.1016/j.scriptamat.2017.06.046 ↗
37. Evidence of FCC to HCP and BCC-martensitic transformations in a CoCrFeNiMn high-entropy alloy by severe plastic deformation10.1016/j.msea.2021.140875 ↗
38. Deposition of TiO2 thin films using RF magnetron sputtering method and study of their surface characteristics10.1016/j.tsf.2004.08.033 ↗
39. Effects of process parameters on the microstructural characteristics of DC magnetron sputtered molybdenum films on graphite substrate10.1007/s13369-020-04888-7 ↗
40. High entropy nitride (HEN) thin films of AlCoCrCu0.5FeNi deposited by reactive magnetron sputtering10.1016/j.surfcoat.2020.126327 ↗
41. Cantor-derived medium-entropy alloys: bridging the gap between traditional metallic and high-entropy alloys10.1016/j.jmrt.2022.01.118 ↗
42. Strengthening materials by engineering coherent internal boundaries at the nanoscale10.1126/science.1159610 ↗
43. Nanocrystalline high-entropy alloy (CoCrFeNiAl0.3) thin-film coating by magnetron sputtering10.1016/j.tsf.2017.08.006 ↗
44. Effects of nanotwins on the mechanical properties of Al x CoCrFeNi high entropy alloy thin films10.1016/j.scriptamat.2017.06.009 ↗
45. Microstructures and mechanical properties of CoCrFeMnNiV high entropy alloy films10.1016/j.jallcom.2019.153388 ↗
46. Size effects on the mechanical properties of nanocrystalline NbMoTaW refractory high entropy alloy thin films10.1016/j.ijplas.2017.04.013 ↗
47. Enhanced pool boiling critical heat flux with a FeCrAl layer fabricated by DC sputtering10.1016/j.ijheatmasstransfer.2016.06.077 ↗
48. Nucleation and growth mechanism of Si amorphous film deposited by PIAD10.1155/2013/383867 ↗
49. Wasa · 2012
50. Structure and properties of thick condensates of nickel, titanium, tungsten, aluminum oxides, and zirconium dioxide in vacuum
51. Influence of apparatus geometry and deposition conditions on the structure and topography of thick sputtered coatings10.1116/1.1312732 ↗
52. Theoretical calculations of the AES intensity–film thickness functions for different growth models10.1016/j.msec.2006.06.035 ↗
53. Effects of microstructures on mesoscopic morphological transitions in deposition growth models10.1098/rspa.2009.0311 ↗
54. Structure zone model for extreme shadowing conditions10.1016/j.tsf.2012.11.007 ↗