Cryogenic impact property of a high-strength-ductility 304L stainless steel with heterogeneous lamella structure
Source abstract
Abstract
A high-strength-ductility 304L stainless steel with heterogeneous lamella structure (HLS) was fabricated by cold rolling and subsequent partial recrystallization. The HLS was composed of lamellar recrystallized grains (mean grain size of ∼4.1 μm) embedded in a hard matrix of ultra-fine grains (mean grain size of ∼0.65 μm) and dislocation-cell structure. It exhibited a superior cryogenic impact property compared with coarse-grained, fine-grained and cold-rolled 304L stainless steels. This was mainly attributed to the suppression of crack propagation by lamellar recrystallized grains, dislocation-cell structure and TRIP effect. In addition, the extra fracture energy was also caused by the delamination in ultra-fine grains. This work will give an important theoretical guidance for the cryogenic applications of the HLS 304L stainless steel.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Material Properties and Failure Mechanisms · High-Velocity Impact and Material Behavior · High Temperature Alloys and Creep
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (50)
Show source-provided references
1. Heterostructured stainless steel: properties, current trends, and future perspectives10.1016/j.mser.2022.100691 ↗
2. Deformation mechanisms and enhanced mechanical properties of 304L stainless steel at liquid nitrogen temperature10.1016/j.msea.2020.140133 ↗
3. Microstructural evolutions during annealing of plastically deformed AISI 304 austenitic stainless steel: martensite reversion, grain refinement, recrystallization, and grain growth10.1007/s11661-016-3589-1 ↗
4. Effects of deformation-induced martensite and grain size on ductile-to-brittle transition behavior of austenitic 18Cr-10Mn-N stainless steels10.1007/s12540-010-1208-z ↗
5. Grain size dependence of ductile-to-brittle transition temperature of a high-nitrogen Cr-Mn austenitic steel10.1016/j.msea.2011.10.047 ↗
6. Effect of rolling strain on the mechanical and tribological properties of 316L stainless steel10.1115/1.4041214 ↗
7. Effects of grain size on tensile property and fracture morphology of 316L stainless steel10.1016/j.matlet.2019.07.058 ↗
8. Effect of large strain cold rolling and subsequent annealing on microstructure and mechanical properties of an austenitic stainless steel10.1016/j.msea.2012.02.101 ↗
9. Heterogeneous materials: a new class of materials with unprecedented mechanical properties10.1080/21663831.2017.1343208 ↗
10. Superior strength and ductility of 316L stainless steel with heterogeneous lamella structure10.1007/s10853-018-2322-4 ↗
11. Design for strength-ductility synergy of 316L stainless steel with heterogeneous lamella structure through medium cold rolling and annealing10.1016/j.vacuum.2018.08.049 ↗
12. Impact property of high-strength 316L stainless steel with heterostructures10.1016/j.msea.2019.03.105 ↗
13. Deformation mechanisms of 304L stainless steel with heterogeneous lamella structure10.1016/j.msea.2018.11.047 ↗
14. Strain-rate effects on the mechanical behavior of the AISI 300 series of austenitic stainless steel under cryogenic environments10.1016/j.matdes.2010.02.041 ↗
15. Effect of pre-straining on low-temperature mechanical behavior of AISI 304L10.1016/j.msea.2012.02.044 ↗
16. Comparative study on mechanical behavior of low temperature application materials for ships and offshore structures: Part I—experimental investigations10.1016/j.msea.2011.04.032 ↗
17. Simultaneous improvement of yield strength and ductility at cryogenic temperature by gradient structure in 304 stainless steel10.3390/nano11071856 ↗
18. Dual heterogeneous structured medium-entropy alloys showing a superior strength-ductility synergy at cryogenic temperature10.1016/j.jmrt.2022.02.078 ↗
19. Excellent cryogenic strength-ductility synergy in duplex stainless steel with heterogeneous lamella structure10.1016/j.msea.2021.142335 ↗
20. Low temperature mechanical behavior of fine- and ultrafine-grained 304 austenitic stainless steel fabricated by cryogenic-rolling and annealing10.1016/j.matchar.2022.112084 ↗
21. Effect of the testing temperature on the impact property of a multilayered soft-hard copper-brass block10.3390/coatings12091236 ↗
22. Evaluation of the dislocation density and dislocation character in cold rolled Type 304 steel determined by profile analysis of X-ray diffraction10.1016/j.actamat.2011.03.055 ↗
23. Processing of fine grained AISI 304L austenitic stainless steel by cold rolling and high-temperature short-term annealing10.1088/2053-1591/aac461 ↗
24. Strength and ductility of 316L austenitic stainless steel strengthened by nano-scale twin bundles10.1016/j.actamat.2011.11.009 ↗
25. Nano/ultrafine grained austenitic stainless steel through the formation and reversion of deformation-induced martensite: mechanisms, microstructures, mechanical properties, and TRIP effect10.1016/j.matchar.2015.03.031 ↗
26. Strength-ductility synergy in a 1.4 GPa austenitic steel with a heterogeneous lamellar microstructure10.1016/j.jmst.2021.06.083 ↗
27. Effect of hot working on structure and strength of type 304L austenitic stainless steel10.1007/BF02647245 ↗
28. The effect of cold work on structure and properties of AISI 304 stainless steel10.1016/j.jmatprotec.2007.09.080 ↗
29. Effect of cyclic thermal process on ultrafine grain formation in AISI 304L austenitic stainless steel10.1007/s11661-009-0033-9 ↗
30. Tensile deformation characteristics of bulk ultrafine-grained austenitic stainless steel produced by thermal cycling10.1016/j.scriptamat.2012.01.052 ↗
31. Comparison of strength–ductility combinations between nanotwinned austenite and martensite–austenite stainless steels10.1016/j.msea.2015.08.065 ↗
32. Work hardening behavior of nanotwinned austenitic grains in a metastable austenitic stainless steel10.1016/j.scriptamat.2015.12.021 ↗
33. An ideal ultrafine-grained structure for high strength and high ductility10.1080/21663831.2014.968680 ↗
34. Influence of processing temperature on the microstructures and tensile properties of 304L stainless steel by ECAP10.1016/j.msea.2007.08.067 ↗
35. Tensile and compressive properties of AISI 304L stainless steel subjected to equal channel angular pressing10.1016/j.msea.2007.04.111 ↗
36. Achieving high strength and high ductility in 304 stainless steel through bimodal microstructure prepared by post-ECAP annealing10.1016/j.msea.2016.11.004 ↗
37. Ductility and plasticity of nanostructured metals: differences and issues10.1016/j.mtnano.2018.09.004 ↗
38. Effects of geometric dimension and grain size on impact properties of 316L stainless steel10.1016/j.matlet.2020.128908 ↗
39. Effect of structural orientation on the impact properties of a soft/hard copper/brass laminate10.1016/j.vacuum.2021.110388 ↗
40. Superior fracture toughness in a high-strength austenitic steel with heterogeneous lamellar microstructure10.1016/j.actamat.2022.117642 ↗
41. Relationship between stress-induced martensitic transformation and impact toughness in low carbon austenitic steels10.1023/A:1016544821646 ↗
42. The role of notch tip shape and radius on deformation mechanisms of 12Cr1MoV steel under impact loading. Part 1. Energy parameters of fracture10.1111/ffe.12533 ↗
43. The role of notch tip shape and radius on deformation mechanisms of 12Cr1MoV steel under impact loading. Part 2. Influence of strain localization on fracture and numeric simulations10.1111/ffe.12602 ↗
44. Heterostructure alleviates Lüders deformation of ultrafine-grained stainless steels10.1016/j.msea.2022.143393 ↗
45. Effect of cryogenic deformation on microstructure and mechanical properties of 304 austenitic stainless steel10.1016/j.matchar.2017.09.027 ↗
46. Correlation of austenite stability and ductile-to-brittle transition behavior of high-nitrogen 18Cr–10Mn austenitic steels10.1016/j.msea.2011.06.025 ↗
47. Combining gradient structure and TRIP effect to produce austenite stainless steel with high strength and ductility10.1016/j.actamat.2016.04.045 ↗
48. Enhanced strength-ductility synergy and transformation-induced plasticity of the selective laser melting fabricated 304L stainless steel
49. Analysis of damage-tolerance of TRIP-assisted V10Cr10Fe45Co30Ni5 high-entropy alloy at room and cryogenic temperatures10.1016/j.jallcom.2020.156090 ↗
50. Ultrafine-grained dual-phase maraging steel with high strength and excellent cryogenic toughness10.1016/j.actamat.2021.116878 ↗