journal article·2023-05Open access

Research on pore closure behavior and microstructure evolution during hot isostatic pressing of Ti6Al4V alloy casting

Wen Li, Qian Xu, Yajun Yin, Jianxin Zhou, Hai Nan

Abstract

Hot isostatic pressing (HIP) has an important influence on the pore closure behavior and the microstructure evolution around pores in Ti6Al4V alloy castings. Therefore, experiments including the preparation of HIP samples and interrupted HIP experiments, and finite element numerical simulations were used to analyze the evolution of pore volume, distribution of stress and strain in Ti6Al4V alloy during HIP. After the mechanical closure of pores, molecular dynamics simulations were used to study the effect of temperatures and numbers of grains on the micropore closure. Finally, SEM/EBSD methods were applied to characterize the evolution of microstructure around the pore. The results show that creep is mainly contributed to the pore closure in the Ti6Al4V alloy during HIP, and the pore volume decreases by 96% after the step of raising temperature and pressure (first stage of HIP), the pore closure mainly occurs in the first stage of HIP. Grain boundary diffusion is the main mechanism for micropore closure. In addition, with the increase of HIP duration, the volume fraction of spheroidized α grains around pores is getting larger, the main mechanisms of spheroidization of α lamellae around the pore during HIP are continuous dynamic recrystallization and lamellae kinking.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Titanium Alloys Microstructure and Properties · Aluminum Alloys Composites Properties · Advanced materials and composites

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (31)

Show source-provided references
1. Flow stress constitutive relationship between lamellar and equiaxed microstructure during hot deformation of Ti-6Al-4V10.1016/j.jmatprotec.2019.02.030 ↗
2. Influence of minor addition of boron on tensile and fatigue properties of wrought Ti–6Al–4V alloy10.1016/j.msea.2012.01.119 ↗
3. Additive manufacturing of Ti6Al4V alloy: a review10.1016/j.matdes.2018.107552 ↗
4. Investigation of porosity changes in cast Ti6Al4V rods after hot isostatic pressing10.1007/s11665-015-1580-4 ↗
5. Effects of hot isostatic pressing temperature on casting shrinkage densification and microstructure of Ti6Al4V alloy10.1007/s41230-017-7178-8 ↗
6. Influence of trapped gas on pore healing under hot isostatic pressing in nickel-base superalloys10.3390/cryst10121147 ↗
7. Pore annihilation in a single-crystal nickel-base superalloy during hot isostatic pressing: experiment and modelling10.1016/j.msea.2013.08.034 ↗
8. Molecular dynamics study on void collapse in single crystal hcp-Ti under hydrostatic compression10.1016/j.commatsci.2019.109280 ↗
9. Influence of temperature on void collapse in single crystal nickel under hydrostatic compression10.3390/ma14092369 ↗
10. Growth and collapse of nanovoids in tantalum monocrystals10.1016/j.actamat.2010.11.001 ↗
11. Healing process of casting pores in a Ni-based superalloy by hot isostatic pressing10.1016/j.jmst.2015.07.004 ↗
12. Microstructure evolution and mechanical properties' improvement of NiAl–Cr(Mo)–Hf eutectic alloy during suction casting and subsequent HIP treatment10.1016/j.intermet.2009.05.003 ↗
13. Microstructural evolution of creep-induced cavities and casting porosities for a damaged Ni-based superalloy under various hot isostatic pressing conditions10.1007/s40195-015-0241-9 ↗
14. A combined material model for numerical simulation of hot isostatic pressing10.1016/S0045-7825(99)00406-5 ↗
15. A combined model to simulate the powder densification and shape changes during hot isostatic pressing10.1016/j.cma.2016.10.033 ↗
16. Closure behavior of the artificial gas pore inside the as-cast Ti6Al4V alloy during HIP: constitutive modeling and numerical simulation10.3390/met11101598 ↗
17. Effect of environment on the creep behavior of the Ti–6Al–4V alloy10.1016/j.msea.2005.03.073 ↗
18. High temperature deformation behavior of physical vapor deposited Ti-6Al-4V10.1016/0956-7151(94)00464-S ↗
19. Creep mechanism in several grades of aluminum at low temperatures10.2320/matertrans.L-M2013833 ↗
20. Void closure criteria for hot metal forming: a review10.1016/j.jmapro.2014.05.006 ↗
21. A study of void crushing in large forgings I: bonding mechanism and estimation model for bonding efficiency10.1016/0924-0136(95)02055-1 ↗
22. Microstructure and mechanical behavior of cast Ti-6Al-4V with addition of boron10.2478/s13531-012-0004-6 ↗
23. High-temperature (1023 K to 1273 K [750 °C to 1000 °C]) plastic deformation behavior of B-modified Ti-6Al-4V alloys: temperature and strain rate effects10.1007/s11661-010-0352-x ↗
24. A study of void crushing in large forgings I: bonding mechanism and estimation model for bonding efficiency10.1016/0924-0136(95)02055-1 ↗
25. Void closure criteria for hot metal forming: a review10.1016/j.jmapro.2014.05.006 ↗
26. LAMMPS - a flexible simulation tool for particle-based materials modeling at the atomic, meso, and continuum scales10.1016/j.cpc.2021.108171 ↗
27. Development of an interatomic potential for the simulation of defects, plasticity, and phase transformations in titanium10.1063/1.4964654 ↗
28. Visualization and analysis of atomistic simulation data with OVITO–the Open Visualization Tool
29. Molecular dynamics study of melting and freezing of small Lennard-Jones clusters10.1021/j100303a014 ↗
30. Automated identification and indexing of dislocations in crystal interfaces10.1088/0965-0393/20/8/085007 ↗
31. Dislocation nucleation and defect structure during surface indentation10.1103/PhysRevB.58.11085 ↗