Pre-oxidization of SiC on interfacial structure and mechanical properties of SiCp/Al composites prepared by vacuum-pressure infiltration
Source abstract
Abstract
SiC particle reinforced Al matrix (SiCp/Al) composites is one of the most representative metal matrix composites and its properties depend on the interfacial structure between SiC and Al matrix. In this paper, SiCp/Al composite with pre-oxidized SiC perform was fabricated by a vacuum-pressure infiltration method. A layer of SiO2 was formed on the surface of SiC particles by pre-oxidization treatment, which then reacted with molten Al to form Al2O3 layer during the infiltration process. The formation of SiC/Al2O3 and Al2O3/Al interface improved interfacial bonding strength and enhanced bonding strength of composites. The formation of an Al2O3 continuous phase between Al and oxidized-SiC results in an improvement of interfacial bonding strength, a 16.8% improvement in bending strength (378.4Mpa) was obtained for the pre-oxidization of SiC performs at 1200 °C. However, higher oxidized temperature (1600 °C) results in thicker SiO2 layer which cannot fully transformed into Al2O3 during the infiltration processes, residual SiO2 layer becomes the source of crack initiation and propagation which lead to a decrease in bending strength (319.2Mpa) of SiCp/Al composites.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Aluminum Alloys Composites Properties · Advanced ceramic materials synthesis · MXene and MAX Phase Materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (47)
Show source-provided references
1. Review on brazing of high volume faction SiCp/Al composites for electronic packaging applications10.1016/S1875-5372(18)30012-2 ↗
2. Thermophysical properties of SiC/Al composites with three dimensional interpenetrating network structure10.1016/j.ceramint.2013.12.105 ↗
3. Thermal conductivity of Al-SiC composites with monomodal and bimodal particle size distribution10.1016/j.msea.2007.07.026 ↗
4. Fabrication, microstructure, friction and wear properties of SiC3D/Al brake disc−graphite/SiC pad tribo-couple for high-speed train10.1016/S1003-6326(19)65097-1 ↗
5. Influence of interfaces on the mechanical behavior of SiC particulate-reinforced Al-Zn-Mg-Cu composites10.1016/j.msea.2015.07.050 ↗
6. Influence of interface thermal resistance on thermal conductivity of SiC/Al composites10.1016/j.ceramint.2019.07.358 ↗
7. Interfacial structure of a SiC/AlComposites[J]10.1016/0921-5093(96)10168-4 ↗
8. A review on interfacial structure optimization and its mechanism on the properties of carbon reinforced metal-matrix composites [J]10.1080/09276440.2023.2179248 ↗
9. Microstructure evolution, property analysis, and interface study of 3%CF-3%SiC-10%SiC functional gradient aluminum matrix composites[J]
10. Mussel-inspired polynorepinephrine/MXene-based magnetic nanohybrid for electromagnetic interference shielding in X-band and strain-sensing performance[J]10.1021/acs.langmuir.2c00278 ↗
11. Carbon-dots-initiated photopolymerization: an in situ synthetic approach for MXene/poly(norepinephrine)/copper hybrid and its application for mitigating water pollution[J]10.1021/acsami.1c08111 ↗
12. Wetting and reaction characteristics of crystalline and amorphous SiO2 derived rice-husk ash and SiO2/SiC substrates with Al-Si-Mg alloys10.1016/j.apsusc.2015.09.137 ↗
13. High-density grafting of carbon nanotube/carbon nanofiber hybrid on carbon fiber surface by vacuum filtration for effective interfacial reinforcement of its epoxy composites[J]10.1016/j.compscitech.2022.109522 ↗
14. Life cycle assessment of cellulose nanofibril films via spray deposition and vacuum filtration pathways for small scale production[J]10.1016/j.jclepro.2022.130890 ↗
15. Interfacial structure and stability of a co-continuous SiC/Al composite prepared by vacuum-pressure infiltration10.1016/j.ceramint.2017.02.085 ↗
16. Limiting the development of Al4C3 to prevent degradation of Al/SiCp composites processed by pressureless infiltration10.1016/j.compscitech.2005.07.025 ↗
17. Achieving a desirable combination of strength and workability in Al/SiC composites by AHP selection method10.1016/j.jallcom.2013.11.181 ↗
18. Effect of reinforcement shape on fracture behaviour of SiC/Al composites with network architecture10.1016/j.compstruct.2019.02.067 ↗
19. Influences of surface polarity and Pd ion implantation on the wettability of Al-12Si(-2 Mg)/SiC systems10.1016/j.matchemphys.2018.02.028 ↗
20. The wettability of SiC particles by molten aluminium alloy10.1016/S0924-0136(01)00975-X ↗
21. Overview: SiC/Al interface reaction and interface structure evolution mechanism
22. Effect of controlled interfacial reaction on the microstructure and properties of the SiCp/Al composites prepared by pressureless infiltration10.1016/j.jallcom.2007.01.127 ↗
23. Methodology to design the interfaces in SiC/Al composites10.1007/s11661-001-0241-4 ↗
24. Effect of SiC particle size on the physical and mechanical properties of extruded Al matrix nanocomposites10.1016/j.matdes.2013.08.049 ↗
25. Interfacial microstructure of SiCp/Al composite produced by the pressureless infiltration technique10.1016/j.ceramint.2012.11.082 ↗
26. Effects of size and oxidation treatment for SiC particles on the microstructures and mechanical properties of SiCp/Al composites prepared by powder metallurgy10.1016/j.msea.2022.143664 ↗
27. Wetting of polycrystalline SiC by molten Al and Al-Si alloys10.1016/j.apsusc.2014.08.055 ↗
28. Effects of copper addition on the sintering behavior and mechanical properties of powder processed Al/SiC p composites10.1007/s10853-005-6101-7 ↗
29. Microstructure and properties of A7075/Al-SiC composites fabricated using powder metallurgy and hot pressing10.1016/j.powtec.2014.08.016 ↗
30. Effect of oxidization of 3D-SiC preforms on the interfacial structure and mechanical properties of co-continuous SiC/Al composites10.1016/j.ceramint.2021.02.047 ↗
31. Enhanced thermal conductive 3D-SiC/Al-Si-Mg interpenetrating composites fabricated by pressureless infiltration10.1016/j.ceramint.2016.10.104 ↗
32. Generation of amorphous SiO2/SiC interface structure by the first-principles molecular dynamics simulation10.4028/www.scientific.net/MSF.556-557.521 ↗
33. Effect of oxidation of SiC particles on mechanical properties and wear behavior of SiCp/Al6061 composites10.1016/j.jallcom.2018.07.355 ↗
34. Microstructure and microchemistry of the Al/SiC interface10.1007/BF00575416 ↗
35. In-situ synthesis, microstructure and mechanism of SiC/Al–Mg–Si composites: effects of Mg addition10.1016/j.ceramint.2020.04.070 ↗
36. Influence of SiC surface polarity on the wettability and reactivity in an Al/SiC system10.1016/j.apsusc.2015.07.164 ↗
37. Alloy design of thixoformable wrought SiC/Al composites10.1016/S0025-5408(98)00215-3 ↗
38. First-principle calculations on the structure of 6H-SiC/Al interface10.1088/2053-1591/ab0be1 ↗
39. First-principles analysis of SiC/Al composites interface
40. Al-SiC interface structure studied by HRTEM10.1016/0956-7151(92)90287-O ↗
41. Enhanced thermal transfer and bending strength of SiC/Al composite with controlled interfacial reaction10.1016/j.matdes.2013.06.056 ↗
42. The preparation of high-volume fraction SiC/Al composites with high thermal conductivity by vacuum pressure infiltration10.3390/cryst11050515 ↗
43. Interfacial structure and stability of a co-continuous SiC/Al composite prepared by vacuum-pressure infiltration10.1016/j.ceramint.2017.02.085 ↗
44. A comparision of interfacial arrefacial of SiC/Al composites10.1016/0956-716X(95)00008-J ↗
45. Effects of reinforcement oxidation on the mechanical properties of SiC particulate reinforced aluminum composites10.1016/S0921-5093(98)00674-1 ↗
46. Influence of ceramic Al2O3 particulates on performance measures and surface characteristics during sinker EDM of stir cast AMMCs10.1108/WJE-01-2019-0015 ↗
47. EDM machinability and parametric optimisation of 2014Al/Al2O3 composite by RSM[J]