journal article·2023-05Open access

Corrosion behavior of Al-6.8Zn-2.2Mg-Sc-Zr alloy with high resistance to intergranular corrosion

Yuexing Liang, Guoai Li, Li Liu, Jiantang Jiang, Jian Cao, Wenzhu Shao, Liang Zhen

Abstract

A high-strength and anti-intergranular corrosion (IGC) Al-6.8Zn-2.2 Mg-Sc-Zr alloy (AS alloy) was designed, and the effects of Sc addition and Cu removal on the microstructure, mechanical properties and corrosion behavior were systematically investigated. Based on transmission electron microscopy (TEM) and Kelvin probe force microscopy (KPFM) techniques, the underlying causes of IGC and exfoliation corrosion (EXCO) of the AS alloy were investigated, and the corrosion mechanism of AS alloy was finally obtained. The AS alloy exhibits excellent mechanical properties with a tensile strength of 601 MPa in the peak-ageing condition at 120 °C, which comes from the pinning effect of Al3(Sc, Zr) dispersions. Moreover, AS alloys of T6 and T74 conditions show outstanding IGC and EXCO resistance. On the one hand, the fine, near-ellipsoidal grains in AS alloy alleviate the peeling stress caused by IGC products by blocking the formation of wedge-shaped gaps along GBs, which then bring about improved EXCO resistance. On the other hand, the removal of Cu from the traditional Al-Zn-Mg-Cu alloy avoids the segregation of Cu into GBs and thereafter reduces the fluctuations of the potential and the electron work function (EWF) across the GBs; the addition of Sc induces the high fraction of LAGBs and thus weakens the solutes' segregation at GBs, which can be beneficial for smoothing the fluctuation of corrosion potential (Ecorr) to enhance the IGC resistance.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Aluminum Alloy Microstructure Properties · Corrosion Behavior and Inhibition · Magnesium Alloys: Properties and Applications

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (62)

Show source-provided references
1. Progress in structural materials for aerospace systems10.1016/j.actamat.2003.08.023 ↗
2. Aluminium structures used in aerospace - status and prospects10.4028/www.scientific.net/MSF.242.11 ↗
3. Recent developments in advanced aircraft aluminium alloys10.1016/j.matdes.2013.12.002 ↗
4. Anisotropy of localized corrosion in 7050-T7451 Al alloy thick plate10.1016/S1003-6326(13)62758-2 ↗
5. Exfoliation corrosion behavior of 7050-T6 aluminum alloy treated with various quench transfer time10.1016/S1003-6326(14)63342-2 ↗
6. Effect of microstructure on exfoliation corrosion resistance in an Al-Zn-Mg alloy10.1016/j.matchar.2017.11.029 ↗
7. Stress corrosion cracking of aluminum alloys10.1007/BF02672284 ↗
8. Effects of severe cold rolling on exfoliation corrosion behavior of Al-Zn-Mg-Cu-Cr alloy10.1007/s11665-011-9978-0 ↗
9. Effects of retrogression and reaging heat treatment on the microstructure, exfoliation corrosion, electrical conductivity, and mechanical properties of AA705010.1002/maco.201910887 ↗
10. Understanding the role of matrix precipitates on the environmentally assisted cracking behavior of AA 7050 alloy10.1016/j.corsci.2022.110281 ↗
11. Stress corrosion cracking and hydrogen embrittlement of an Al-Zn-Mg-Cu alloy10.1016/j.actamat.2004.06.023 ↗
12. Effect of of Yb, Cr and Zr additions on recrystallization and corrosion resistance of Al-Zn-Mg-Cu alloys10.1016/j.msea.2008.07.028 ↗
13. The effect of Cu and Sc on the localized corrosion resistance of Al-Zn-Mg-X alloys10.1016/j.jallcom.2019.05.189 ↗
14. Effect of cerium on microstructure, mechanical properties and corrosion properties of Al-Zn-Mg alloy10.1016/j.jre.2020.07.010 ↗
15. Effect of Sc and Zr additions on corrosion behaviour of Al–Zn–Mg–Cu alloys10.1016/j.jallcom.2014.05.128 ↗
16. Microstructural evolution upon heat treatments and its effect on corrosion in Al-Zn-Mg alloys containing Sc and Zr10.1016/j.jmrt.2020.03.025 ↗
17. Effects of co-addition of minor Sc and Zr on aging precipitates and mechanical properties of Al–Zn–Mg–Cu alloys10.1016/j.jmrt.2022.12.133 ↗
18. Effect of recrystallization on intergranular fracture and corrosion of Al-Zn-Mg-Cu-Zr alloy10.1016/j.jallcom.2014.10.044 ↗
19. Revealing the relationship between grain size and corrosion rate of metals10.1016/j.scriptamat.2010.08.035 ↗
20. Effect of grain size on corrosion: a review10.5006/1.3462912 ↗
21. Effect of grain size on corrosion of high purity aluminium10.1016/j.electacta.2010.09.023 ↗
22. Enhancing stress corrosion cracking resistance in Al-Zn-Mg-Cu-Zr alloy through inhibiting recrystallization10.1016/j.engfracmech.2009.06.006 ↗
23. Effects of Sc and Zr microalloying additions on the microstructure and mechanical properties of new Al-Zn-Mg alloys10.1016/j.jallcom.2012.03.108 ↗
24. Microstructure, mechanical properties and corrosion behavior of commercial 7N01 alloys10.1016/S1003-6326(22)65832-1 ↗
25. Grain boundary character distribution and intergranular corrosion behavior in high purity aluminum10.1016/S1359-6462(00)00682-5 ↗
26. Effect of grain boundary characteristics on intergranular corrosion resistance of 6061 aluminum alloy extrusion10.1007/s11661-002-0274-3 ↗
27. Influence of grain boundaries misorientation angle on intergranular corrosion in 2024-T3 aluminium10.2478/s13536-011-0050-4 ↗
28. Grain boundary structures and their correlation with intergranular corrosion in an extruded Al-Mg-Si-Cu alloy10.1016/j.matchar.2020.110695 ↗
29. Grain boundary precipitation induced by grain crystallographic misorientations in an extruded Al-Mg-Si-Cu alloy10.1016/j.jallcom.2014.10.206 ↗
30. Corrosion behaviour of AA6082 Al-Mg-Si alloy extrusion: recrystallized and non-recrystallized structures10.1016/j.corsci.2018.08.047 ↗
31. Influence of scandium on the pitting behaviour of Al-Zn-Mg-Cu alloys10.1016/j.actamat.2007.08.021 ↗
32. Effect of Scandium addition on mechanical properties and corrosion resistance of medium strength Al-Zn-Mg(-Cu) alloy10.4028/www.scientific.net/MSF.794-796.241 ↗
33. Influence of heat treatment and scandium addition on the electrochemical polarization behavior of Al-Zn-Mg-Cu-Zr alloy10.1007/s11661-007-9303-6 ↗
34. Localized corrosion behavior associated with Al7Cu2Fe intermetallic in Al-Zn-Mg-Cu-Zr alloy10.1016/j.jallcom.2018.12.151 ↗
35. An analytical electron microscopy study of constituent particles in commercial 7075-T6 and 2024-T3 alloys10.1007/s11661-998-0240-9 ↗
36. Electrochemical behavior and localized corrosion associated with Al7Cu2Fe particles in aluminum alloy 7075-T65110.1016/j.corsci.2006.02.007 ↗
37. Electrochemical behavior of thin film analogs of Mg(Zn,Cu,Al)210.1149/1.1386626 ↗
38. Effects of Cu addition on the precipitation hardening response and intergranular corrosion of Al-5.2Mg-2.0Zn (wt.%) alloy10.1016/j.matchar.2016.11.004 ↗
39. The role of microstructure and microchemistry on intergranular corrosion of aluminium alloy AA7085-T745210.1016/j.corsci.2018.08.033 ↗
40. Relationship between alloy composition, microstructure and exfoliation corrosion in Al-Zn-Mg-Cu alloys10.1016/j.corsci.2011.05.057 ↗
41. Correlation between precipitates evolution and mechanical properties of Al-Sc-Zr alloy with Er additions10.1016/j.jmst.2021.05.031 ↗
42. High tunnelling electroresistance in a ferroelectric van der Waals heterojunction via giant barrier height modulation10.1038/s41928-020-0441-9 ↗
43. Electrochemical polarization: I. A theoretical analysis of the shape of polarization curves10.1149/1.2428496 ↗
44. 2015
45. 2018
46. Effect of retrogression treatment with different heating rates on microstructure, strength and corrosion behaviors of 7050 alloy10.1016/j.matchar.2022.111819 ↗
47. Microstructures and mechanical properties of age-formed 7050 aluminum alloy10.1016/j.msea.2012.01.067 ↗
48. Effect of electrochemical parameters on the formation of anodic films on commercially pure titanium by plasma electrolytic oxidation10.1016/j.surfcoat.2014.06.058 ↗
49. Determination of effective capacitance and film thickness from constant-phase-element parameters10.1016/j.electacta.2009.10.065 ↗
50. The analysis of electrode impedances complicated by the presence of a constant phase element10.1016/S0022-0728(84)80324-1 ↗
51. Effect of Cu content and aging conditions on pitting corrosion damage of 7xxx series aluminum alloys10.1149/2.0301504jes ↗
52. Investigating localized corrosion susceptibility arising from Sc containing intermetallic Al3Sc in high strength Al-alloys10.1016/j.scriptamat.2007.01.036 ↗
53. Tafel slopes from first principles10.1007/s10008-008-0670-8 ↗
54. Improvement of mechanical properties of 7475 based aluminum alloy sheets by controlled warm rolling10.2320/matertrans.45.69 ↗
55. Effect of grain boundary structure on sensitization and corrosion of stainless steel10.1007/BF02668561 ↗
56. Influence of grain-boundary pre-precipitation and corrosion characteristics of inter-granular phases on corrosion behaviors of an Al-Zn-Mg-Cu alloy10.1016/j.mseb.2012.04.008 ↗
57. Characterisation of the composition and volume fraction of η′ and η precipitates in an Al-Zn-Mg alloy by a combination of atom probe, small-angle X-ray scattering and transmission electron microscopy10.1016/j.actamat.2005.03.004 ↗
58. Influence of alloy composition and heat treatment on precipitate composition in Al-Zn-Mg-Cu alloys10.1016/j.actamat.2009.09.003 ↗
59. Effects of Cu and Al on the crystal structure and composition of η (MgZn2) phase in over-aged Al-Zn-Mg-Cu alloys10.1007/s10853-012-6428-9 ↗
60. Role of grain-boundary precipitates and solute-depleted zone on the intergranular corrosion of aluminum alloy 715010.5006/1.3287699 ↗
61. Substitution of Cu and/or Al in η phase (MgZn2) and the implications for precipitation in Al-Zn-Mg-(Cu) alloys10.1016/j.intermet.2014.01.012 ↗
62. Surface energies and work functions of the transition metal carbides10.1016/j.susc.2004.03.050 ↗