Effect of Mo2C addition on the formation of core-rim structure and mechanical properties of Ti(C,N)-WC-Mo2C-(Ni, Co) cermet
Source abstract
Abstract
Ti(C,N)-based cermets with various Mo2C contents (4, 6, 8, 10, 12 and 14 wt%) were fabricated via vacuum hot-pressing sintering. The results showed that the cermets were comprised of coarse hard phase with a core-rim structure and partial fine rimless hard phase, embedded in Ni/Co binder matrix. Mo2C inhibits the rim growth on the coarse hard phase and hinders the dissolution of the fine rimless hard phase, which improves the mechanical properties of cermets. In addition, with the increasing Mo2C content, a bimodal pattern of X-ray diffraction peaks of (Ti,W,Mo) (C,N) solid solution can be observed, which indicates that high content of Mo2C has a different effect on the W and Mo contents in the white core-grey rim and black core-grey rim hard phase. When the Mo2C addition reaches 12 wt%, the cermet exhibits better wear resistance, which is attributed to a film composed of Ti and Mo oxides formed on the sliding interface. This work provides fundamental knowledge about the formation of core-rim structure and mechanical properties of Ti(C,N)-based cermets with various Mo2C contents.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Advanced materials and composites · Advanced ceramic materials synthesis · Powder Metallurgy Techniques and Materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (45)
Show source-provided references
1. Ti(C,N)-based cermets: critical review of achievements and recent developments10.4028/www.scientific.net/SSP.274.53 ↗
2. Development of TiCN-based cermets: mechanical properties and wear mechanism10.1016/j.ijrmhm.2012.07.001 ↗
3. Ti(C,N) cermets - metallurgy and properties10.1016/0263-4368(95)00027-G ↗
4. A study on microstructural changes in Ti(CN)–NbC–Ni cermets10.1016/S0921-5093(98)00609-1 ↗
5. Development and application of tool wear: a review of the characterization of TiC-based cermets with different binders10.1016/j.cej.2014.06.078 ↗
6. Effect of granule size and WC content on microstructure and mechanical properties of double structure Ti(C,N) based cermets
7. Influence of temperature on sintering behavior and properties of TiC-Fe-Co-Ni-Cr-Mo cermets10.1016/j.ceramint.2017.08.186 ↗
8. Sliding wear behavior of SPS processed TaC-containing Ti(CN)-WC-Ni/Co cermets against Silicon Carbide10.1016/j.wear.2017.02.013 ↗
9. Correlation between microstructure and mechanical properties of Ti(C,N)-xWC-Ni cermets prepared by mechanical activation and subsequent in situ carbothermal reduction10.1016/j.ceramint.2021.02.027 ↗
10. Formation of core/rim structures in Ti(C,N)-WC-Ni cermets via a dissolution and precipitation process10.1111/j.1151-2916.2000.tb01415.x ↗
11. Influence of Mo2C and TaC additions on the microstructure and mechanical properties of Ti(C, N)-based cermets10.1016/j.ceramint.2015.10.168 ↗
12. Effect of carbon addition on the densification behavior, microstructure evolution and mechanical properties of Ti(C, N)-based cermets10.1016/j.ceramint.2015.12.097 ↗
13. Effect of NbC addition on the microstructure, mechanical properties and thermal shock resistance of Ti(C,N)-based cermets
14. Effect of Mo2C/(Mo2C+WC) weight ratio on the microstructure and mechanical properties of Ti(C,N)-based cermet tool materials10.1016/j.jallcom.2015.07.144 ↗
15. Effect of Mo2C addition on the microstructure and fracture behavior of (W,Ti)C-based cemented carbides10.1016/j.ceramint.2014.07.150 ↗
16. Schwarz · 2016
17. Phase equilibria in the systems TiCN, ZrCN and HfCN10.1016/0925-8388(94)01314-8 ↗
18. Effect of vacuum-sintering temperature on magnetic and mechanical properties of TiC-TiN-Ni-Mo-C cermets10.1007/s11661-018-4659-3 ↗
19. TiC-(Ti,M)C core-rim structures in solid-state manufactured steel-based MMCs10.1016/j.matchar.2019.109880 ↗
20. Hot-pressing of (Ti,Mt)(C,N)-Co-Mo2C (Mt = Ta,Nb) powdered cermets synthesized by a mechanically induced self-sustaining reaction10.1016/j.cej.2016.02.007 ↗
21. The effect of various Co contents on the microstructure and properties of Ti(C,N)-TiB2-Co cermets prepared in situ via reactive hot pressing10.1177/1687814020925716 ↗
22. Core-rim structure formation in TiC-Ni based cermets fabricated by a combined thermal explosion/hot-pressing process10.1016/j.ijrmhm.2017.09.014 ↗
23. A review of two-step sintering for ceramics10.1016/j.ceramint.2016.05.065 ↗
24. Microstructure and mechanical properties of Mo-free Ti(C,N)-based cermets with Ni–xCr binders10.1016/j.jallcom.2014.11.236 ↗
25. Effect of carbon content on the microstructure and properties of (Ti 0.7W0.3)C-Ni cermet10.1016/j.ijrmhm.2011.01.004 ↗
26. Effect of partial substitution of Cr for Ni on densification behavior, microstructure evolution and mechanical properties of Ti(C,N)-Ni-based cermets10.1016/j.jallcom.2011.01.180 ↗
27. Synthesis of nano (Ti,W)C powder with preferred orientation and twin boundary structure10.1016/j.apt.2022.103550 ↗
28. Phase evolution, microstructure and properties of Y2O3-doped TiCN-based cermets10.1016/S1002-0721(14)60498-1 ↗
29. Indentation fracture of WC-Co cermets10.1007/BF00555296 ↗
30. Influence of sintering process on microstructure and mechanical properties of Ti(C,N)-Based cermet10.3390/ma13183938 ↗
31. Microstructure of Ti(CN)-WC-NbC-Ni cermets10.1111/j.1151-2916.2001.tb00750.x ↗
32. Microstructure and mechanical properties of TiC-WC-(Ti,W)C-Ni cermets10.1016/j.msea.2009.05.017 ↗
33. The effect of WC, Mo2C, TaC content on the microstructure and properties of ultra-fine TiC0.7N0.3 cermet10.1016/j.matdes.2006.03.005 ↗
34. TiMoCN based cermets: Part I. Morphology and phase composition10.1016/S0263-4368(03)00010-6 ↗
35. Microstructure and mechanical properties of ultrafine Ti(CN)-based cermets fabricated from nano/submicron starting powders10.1016/j.ceramint.2004.09.013 ↗
36. Ti(C,N)-based cermets containing uniformly dispersed ultrafine rimless grains: effect of VC additions on the microstructure and mechanical properties10.1016/j.ceramint.2020.05.055 ↗
37. Effect of secondary carbides addition on the microstructure and mechanical properties of (Ti, W, Mo, V)(C, N)-based cermets10.1016/j.ijrmhm.2011.03.013 ↗
38. Microstructure of model cermets with high Mo or W content10.1016/S0263-4368(99)00032-3 ↗
39. Strengthened Ti(C, N)-based cermets using high-energy ball-milled NiTiC binders: microstructure and mechanical properties10.1016/j.ceramint.2018.06.080 ↗
40. Influence of coarse TiCN content on the morphology and mechanical properties of ultrafine TiCN-based cermets10.1016/j.msea.2016.11.085 ↗
41. Effect of Mo addition on microstructure and mechanical properties of (Ti,W)C solid solution based cermets10.1016/j.ijrmhm.2013.11.004 ↗
42. Diffusion modeling in cemented carbides: solubility assessment for Co, Fe and Ni binder systems10.1016/j.ijrmhm.2017.06.006 ↗
43. Fabrication of nanocomposite Ti(C,N)-based cermet by spark plasma sintering10.1016/j.matchemphys.2004.12.031 ↗
44. Effect of secondary carbides on the core-rim structure evolution of TiC-based cermets10.1088/2053-1591/ac0d92 ↗
45. Effect of MoO3 on the microstructure and tribological properties of laser-clad Ni60/nanoCu/h-BN/MoO3 composite coatings over wide temperature range10.1016/j.surfcoat.2020.125477 ↗