journal article·2023-07Open access

Review of the recent Chinese research on the electrical properties of CuCr contacts for vacuum interrupters

Jin-ru Han, Zhi-he Dou, Ting-an Zhang, Wang An

Abstract

Vacuum interrupters are important components to ensure the safety of medium and high-voltage power transmission, and contact material is an important factor affecting the performance of vacuum interrupters. CuCr contact materials have been used in most commercial vacuum interrupters. This paper summarizes the research status of the electrical properties of CuCr contacts used in vacuum interrupters, analyses the factors influencing the electrical properties of CuCr contacts, and summarizes the relevant mechanisms, which point out the direction for improving the properties of CuCr alloys and promotes the development of subsequent research on the electrical properties of CuCr contacts. Finally, the electrical properties of CuCr contacts prepared by self-propagating metallurgy based on the Al–CuO–Cr2O3 reaction system are summarized.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Vacuum and Plasma Arcs · Advanced materials and composites · Silicon Carbide Semiconductor Technologies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (76)

Show source-provided references
1. A review of the development of the vacuum interrupter
2. The latest development of foreign medium-voltage vacuum interrupters and their vacuum circuit breakers
3. Progress of vacuum interrupter (VI) and recent technical trends
4. Advances in material development for high power, vacuum interrupter contacts10.1109/95.296374 ↗
5. Insulation recovery characters after current interference by variable vacuum interrupter elections10.1109/TDEI.2006.1593396 ↗
6. Dielectric characters of vacuum circuit breakers with CuCr and CuBi contacts before and after short-circuit breaking operations10.1016/j.vacuum.2011.05.007 ↗
7. Correlation and regression between the breakdown voltage and pre-breakdown parameters of vacuum switching elements10.1016/j.vacuum.2015.10.024 ↗
8. Net shape manufacturing of CuCr for vacuum interrupters10.1109/TDEI.2011.6118654 ↗
9. Anode current density distribution measures for different vacuum arc modes subject to axial magnetic field10.1109/TPS.2015.2436973 ↗
10. Method of increasing the electric strength of vacuum insulation using a high-frequency vacuum arc10.1007/s11182-018-1509-0 ↗
11. Thermal conductivity of graphene nanoplates reinforced CuCr composite coatings by mechanical alloying method10.1016/j.surfcoat.2020.126554 ↗
12. Microstructures and electrical and mechanical properties of Cu-Cr alloys fabricated by selective laser melting
13. Microstructures and mechanical properties of spark plasma sintered Cu-Cr composites prepared by mechanical milling and alloying
14. Performance improvement of laser additive manualized Cu ® Cr alloy via continuous extrusion10.1016/j.jallcom.2021.160475 ↗
15. Synthesis, microstructure, and hardness of rapidly solidified Cu-Cr alloys10.1016/j.jallcom.2019.04.209 ↗
16. Contact materials for vacuum interrupters10.1109/TPHP.1974.1134834 ↗
17. The influence of composition and Cr particle size of Cu/Cr contacts on chopping current, contact resistance an breakdown voltage in vacuum interrupters10.1109/33.31434 ↗
18. Preparation of CuCr25 alloys through vacuum arc-smelting and their properties
19. Properties of CuCr contact materials with low chromium content and fine elements
20. Properties of nanocrystalline CuCr50 contact material10.1002/adem.200500139 ↗
21. CuCr25W1Ni2 contact material of vacuum interrupter
22. Effect of W or C additives on microstructure optimization of CuCr25 alloy
23. Microstructure and properties of vacuum induction melted CuCr25 alloys10.1016/j.jallcom.2003.07.001 ↗
24. Effect of Ni addition on the dielectric strength and liquid phase separation of Cu-Cr alloys during the Vacuum breakdown10.1016/j.vacuum.2014.07.006 ↗
25. In-situ synthesis of Cr2Nb/CuCr composites and their vacuum electrical properties
26. Effect of Fe on microstructures and vacuum arc characters of CuCr alloys10.1016/j.ijrmhm.2010.10.012 ↗
27. Effect of Mo addition on microstructure and Vacuum arc characters of CuCr50 alloy10.1016/j.vacuum.2011.02.001 ↗
28. Electronic properties of nanocrystalline CuCr25 contact material10.1109/TCPMT.2012.2225062 ↗
29. Experimental investigation on the erosion behavior in high-current vacuum arcs and resulting microparticles dynamics10.1088/1361-6463/ac0fac ↗
30. Study of hypervelocity impingement for Cu nanoparticles on CuCr alloy target electronics in initiating vacuum breakdown
31. Determination of arc corrosion rate of CuCr contact materials
32. Low electronic erosion rate of nanocrystalline CuCr-50 alloy in vacuum
33. Effect of CuCr25 nanocrystallization on vacuum arc cathode spot diffusion
34. Influence of microstructure of CuCr25 cathode on the motion of vacuum arc spots10.1016/j.physleta.2005.12.023 ↗
35. High-current vacuum arc phenomena of nanocrystalline CuCr25 contact material10.1109/TPS.2011.2113359 ↗
36. Liquid phase separation of Cu-Cr alloys during the vacuum breakdown10.1016/j.jallcom.2011.04.017 ↗
37. History of microcrystalline and nanocrystalline Cu/Cr pseudo-alloys to vacuum discharge10.1016/j.jallcom.2018.04.049 ↗
38. Inrush current prestrike arc behaviors of contact materials CuCr50/50 and CuW10/9010.1109/TPS.2016.2640341 ↗
39. Homogenic arc ablation behaviors of CuCr cathedes improved by chromic oxide10.1016/j.jmst.2020.10.083 ↗
40. Arc erosion resistance of CuCrMo films deposed via magnetron sputtering10.1088/2053-1591/ac0179 ↗
41. Microstructure of contact material modified by high-current vacuum arc10.1007/s11182-018-1493-4 ↗
42. Experiment investigation on triggered vacuum arc under the different contact materials10.1109/TPS.2018.2854715 ↗
43. Experiment investigation on vacuum arc of AMF contacts under different materials10.1063/1.5047505 ↗
44. Dependence of the chopping current level of a vacuum interrupter on parallel capacitance10.1109/TPS.2017.2695329 ↗
45. Vacuum circuit breaker current-zero phenomena10.1109/TPS.2005.856486 ↗
46. Current-interruption testing of vacuum switching devices10.1109/94.788732 ↗
47. Preparation and cut-off value of nanocrystalline CuCr alloy
48. Vacuum arc characters on nanocrystalline CuCr alloys10.1016/j.vacuum.2006.07.016 ↗
49. Study on cathode spot and chopping current value of CuCr contact material under the low current
50. Effect of Ti-Zr addition on the microstructure and the arc chopping current of melt-spun CuCr ribbon10.1016/j.vacuum.2008.11.009 ↗
51. A. Schneider, S. Popov, V. G. Durakov, B. V. Dampilon, S. Z. Dehonova, A. Batrakov. On breaking capacity of the CuCr25 composite material produced with electron-beam cladding [C]. 2012 tomsk 25th international symposium on discharges and electrical insulation in vacuum (ISDEIV).10.1109/DEIV.2012.6412505 ↗
52. Interruption phenomena for variable contact materials in vacuum10.1109/TPS.2009.2019654 ↗
53. Microstructure and properties of CuCr contact materials with different Cr content10.1016/S1003-6326(11)61612-9 ↗
54. Vasil G. Durakov, S. F. Gnyusov, B. V. Dampilon, S. Z. Dehonova, B. I. Ubiennykh. Microstructure and properties of vacuum electron beam facing CuCr25 contact material [C]. 2012 25th international symposium on discharges and electrical insulation in vacuum, Tomsk: 525-528..10.1109/DEIV.2012.6412571 ↗
55. An opening displacement curve charactic determined by high-current anode phenomena of a vacuum interrupter10.1109/TPWRD.2013.2264487 ↗
56. High-current vacuum arc: the relationship between anode phenomena and the average opening velocity of vacuum interrupters10.1109/TPS.2011.2107529 ↗
57. Interruption phenomenon in intermediate-frequency vacuum arc10.1088/1009-0630/18/3/16 ↗
58. Interruption property of vacuum interrupter with four different contact materials
59. Metallurgical aspects of contact materials for vacuum switching devices10.1109/27.41194 ↗
60. Properties of vacuum cast CuCr25 and CuCr25Te contact material10.1016/S1003-6326(10)60086-6 ↗
61. Welding behavior of vacuum interrupters equipped with CuCr contact material caused by making and breaking operations under short circuit current interaction
62. Wang · 2017
63. Preparation and performance of Cu-Cr contact materials for vacuum switches with low contact pressure10.1007/s11664-016-4782-0 ↗
64. Preparation and characterization of CuCr alloys by self-propagation melting and casting
65. Preparation of CuCr alloy by SHS melting and it characters
66. Preparation of CuCr alloy by thermit reduction electronic stirring10.1016/S1005-8850(07)60124-8 ↗
67. The effect of electrical stirring on the structure of CuCr alloy synthesized by comment
68. One-step preparation of homogeneous and dense CuCr(50) alloys by of aluminothermic reduction under external magnetic field conditions
69. Effect of reduction-slagging coupling of Cr2O3 during in-situ preparation of homogenous CuCr50 alloy by self-propagating high temperature synthesis metallurgy10.1016/j.jmrt.2022.06.110 ↗
70. Preparation of CuCr alloy by self-propagating high-temperature synthesis
71. Ting-an Zhang, wang an, progress in the preparation of large-size high-performance CuCr alloys10.1155/2022/1333985 ↗
72. The effect of laser surface melting on grain refinement of phase separated Cu-Cr alloy-ScienceDirect10.1016/j.optlastec.2019.105577 ↗
73. Grain refinement of hyperemic immiscible Cu-50Cr alloy during rapid melting and solidification induced by high power density laser beams10.3390/met9050585 ↗
74. Modeling of CuCr contact vacuum arc with consideration of its components10.1063/1.5055699 ↗
75. Investigation of vacuum arc and erosion characters of spiral TMF contacts with different materials10.1109/TPS.2022.3174723 ↗
76. Vacuum arc behavior between transverse magnetic field contacts subject to variable axial magnetic field10.1063/1.4954301 ↗