journal article·2023-09Open access

Effect of solid solution time on microstructure and corrosion property of wire arc additively manufactured 2319 aluminum alloy

Caimei Wang, Ziqun Jiang, Xiaoyu Ma, Yu Zhang, Peng He, Feng Han

Abstract

2319 aluminum alloy was prepared using wire arc additive manufacturing (WAAM) technique. The solid solution time of achieving improving corrosion resistance in WAAM 2319 aluminum alloy was investigated. The results indicated that the as deposited 2319 aluminum alloy was composed of dendritic grains. Numerous inter-granular intermetallic were continuously distributed along the grain boundary. As the solid solution time increased, the inter-granular intermetallic gradually dissolved into α-Al matrix resulting in discontinuously distribution and more homogeneous element distribution. Electrochemical experiment results indicated that the corrosion potential of WAAM 2319 aluminum alloy gradually increased with the increase of solid solution time. This indicated that increasing solid solution time could effectively increased the corrosion resistance of WAAM 2319 aluminum alloy. Improved corrosion resistance can be attributed to refined and discontinuous inter-granular intermetallic.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Additive Manufacturing Materials and Processes · Aluminum Alloy Microstructure Properties · Intermetallics and Advanced Alloy Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (47)

Show source-provided references
1. A review: drilling performance and hole quality of aluminium alloys for aerospace applications10.1016/j.jmrt.2020.09.003 ↗
2. Recent advances in aging of 7xxx serious aluminum alloys: a physical metallurgy perspective10.1016/j.jallcom.2018.11.286 ↗
3. A review on ultimate strength of aluminium structural elements and systems for marine application
4. Metal additive manufacturing in aerospace: a review10.1016/j.matdes.2021.110008 ↗
5. Metal additive manufacturing: technology, metallurgy and modelling
6. Fatigue crack initiation and propagation of wire arc additive manufactured Al-Mg alloy10.1016/j.engfailanal.2023.107164 ↗
7. Research progress in arc based additive manufacturing of aluminium alloys-A review
8. Study of mass transport in cold wire deposition for Wire Arc Additive Manufacturing10.1016/j.ijheatmasstransfer.2018.04.092 ↗
9. A review of the wire arc additive manufacturing of metals: properties, defects, and quality improvement, J. Manufacturing
10. Influences of process parameters on surface roughness of multi-layer single-pass thin-walled parts in GMAW-based additive manufacturing10.1016/j.jmatprotec.2017.09.020 ↗
11. Study on the inconsistency in mechanical properties of 2219 aluminium alloy TIG-welded joints10.1016/j.jallcom.2018.10.182 ↗
12. Rapid surface defects in wire and arc additive manufacturing based on laser profilometer10.1016/j.measurement.2021.110503 ↗
13. Review of aluminum alloy development for wire arc additive manufacturing10.3390/ma14185370 ↗
14. Comparative study of eutectic Al-Si alloys manufactured by WAAM and casting10.1007/s00170-020-05735-7 ↗
15. Influence of travel speed on microstructure and mechanical properties of wire + arc additively manufactured 2219 aluminum alloy10.1016/j.jmst.2019.06.016 ↗
16. Design and cracking susceptibility of additively manufactured Al-Cu-Mg alloys with tandem wires and plused arc10.1016/j.jmatprotec.2018.06.030 ↗
17. Metal transfer modes for Wire Arc Additive Manufacturing Al-Mg alloys: influence of heat input in microstructure and porosity10.1016/j.jmatprotec.2021.117271 ↗
18. Effect of travel speed on the properties of Al-Mg aluminum alloy fabricated by wire arc additive manufacturing10.1007/s11665-021-05959-y ↗
19. Study on the solid solution temperature of achieving ultra-high strength in wire-arc additive manufactured Al-Zn-Mg-Cu aluminum alloy10.1016/j.matchar.2023.112975 ↗
20. Microstructure and mechanical properties of wire arc additively manufactured 205A high strength aluminum alloy: the comparison of as-deposited and T6 heat-treated samples10.1016/j.matchar.2022.111990 ↗
21. Properties of wire + arc additively manufactured 2024 aluminum alloy with different solution treatment temperature10.1016/j.matlet.2018.07.144 ↗
22. A closer look at constituent induced localized corrosion in Al-Cu-Mg alloys10.1016/j.corsci.2016.10.018 ↗
23. Study of the potential electrochemical noise during corrosion process of aluminum alloys 2024, 7075 and pure aluminum10.1002/maco.200390132 ↗
24. Improving the corrosion resistance of friction stir welding joint of 7050 Al alloy via optimizing the process route10.1016/j.jmrt.2023.05.053 ↗
25. Breakdown of passivity of aluminium alloys by intermetallic phases in neutral chloride solution10.1016/S0966-9795(99)00114-4 ↗
26. Comparison of corrosion behaviour of friction stir processed and laser melted AA 2219 aluminium alloy10.1016/j.matdes.2011.03.033 ↗
27. Microstructure and mechanical properties of ultra-high strength Al-Zn-Mg-Cu-Sc aluminum alloy fabricated by wire + arc additive manufacturing10.1016/j.jmapro.2022.05.009 ↗
28. Achieving high strength-ductility of Al-Zn-Mg-Cu alloys via hot-wire arc additive manufacturing enabled by strengthening precipitates
29. Effect of arc oscillation on porosity and mechanical properties of 2319 aluminum alloy fabricated by CMT-wire arc additive manufacturing10.1016/j.jmrt.2023.03.203 ↗
30. Improved tensile strength and fatigue properties manufactured 2319 aluminum alloy by surface laser shock peening10.1016/j.msea.2023.144599 ↗
31. Microstructure, residual stress and tensile properties control of wire-arc additive manufactured 2319 aluminum alloy with laser shock peening10.1016/j.jallcom.2018.02.353 ↗
32. Mechanical properties and precipitation behavior of the heat-treated wire + arc additively manufactured 2219 aluminum alloy10.1016/j.matchar.2020.110735 ↗
33. Microstructure evolution and mechanical behavior of 2219 aluminum alloys additively fabricated by the cold metal transfer process10.3390/ma11050812 ↗
34. The strengthening effect of inter-layer cold working and post-deposition heat treatment on the additively manufactured Al-6.3Cu alloy10.1016/j.msea.2015.10.101 ↗
35. ASM Metals Handbook
36. Chloride corrosion property evolution of CrMnFeCoNi high-entropy alloy coating10.1080/02670836.2022.2080388 ↗
37. Galvanic corrosion in a eutectic high entropy alloy10.1016/j.jelechem.2019.113331 ↗
38. Microstructure refinement and mechanical properties enhancement of wire-arc additive manufactured 2219 aluminum alloy assisted by interlayer friction stir processing10.1016/j.vacuum.2022.111264 ↗
39. Pore formation and evolution in wire + arc additively manufactured 2319 Al alloy
40. Quantitative analysis of the solute redistribution and precipitate of Al-Mg-Si series alloys resistance spot welds after post-weld heat treatment10.1016/j.jmrt.2021.11.063 ↗
41. Reasons for superior mechanical and corrosion properties of 2219 aluminum alloy electron beam welds10.1016/j.matchar.2005.07.006 ↗
42. Effect of post weld heat treatment on the microstructure and corrosion behavior of AA2219 aluminum alloy joints welded by variable polarity tungsten inert gas welding10.1016/j.matdes.2014.10.056 ↗
43. Quasi-continuous-wave laser surface melting of aluminium alloy: precipitate morphology, solute segregation and corrosion resistance10.1016/j.corsci.2019.01.035 ↗
44. Insight on corrosion behavior and mechanism of 2219 friction stir welded joint in N2O4 medium10.1016/j.matchemphys.2023.128014 ↗
45. Metallurgical aspects of corrosion resistance of aluminium alloys
46. Corrosion mechanism of laser-melted AA 2014 and AA 2024 alloys10.1016/j.apsusc.2005.01.067 ↗
47. Microstructure and pitting corrosion of friction stir welded joints in 2219-O aluminum alloy thick plate10.1016/j.corsci.2009.07.004 ↗